Program does not properly after virtualization

Similar Questions

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• headphone 3.5 mm jack does not properly after update iOS10

  Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

  So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

  someone at - it a similar experience or a solution?

  Hi oramicle,

  On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

  After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

• Program does not work after the AIR 23.0.0.246

  I developed a program with Adobe Flash Professional CS6(Air for Desktop)

  the program has worked well for Adobe AIR 22.0.0.153. but after the update to 23.0.0.246, , but this does not work well.  Please help me

  After uninstalling Adobe AIR 23.0.0.257 again, if I install Adobe AIR 22.0.0.153 then this program works well.

  I think that air more recent 23.0.273 solved this problem.

• fonts Mathematica does not properly after the senior at el capitan

  I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• Photosmart HP 6510 B211a works does not properly after power failure

  Hi guys,.

  I'm new to this forum, but I hope someone can help me.

  I have a HP all in one Photosmart B211a 6510, which worked like a dream, since I had last winter. We had an unexpected outage yesterday however and once the power came back, the printer insists on the fact that there is no ink in the system. I fear the worst and believe that his brain can be somewhat blurred.

  I have two of your ink cartridges replaced last week with genuine HP ones and everything was fine. My ink level is almost low on the other two, but I have not replaced these yet because it is not necessary.

  Once the power came back, the printer informed me that the magenta ink was 'missing or damaged '. I removed the cartridge, cleaned with distilled water and dry. Once replaced, the printer has changed his mind and told me all the ink cartridges are now 'missing or damaged '. When I opened the printer again, the transport of ink is automatically did not move as usual to allow me to change or remove the cartridges.

  More the touch screen of the printer does not allow me to leave this error message or perform any other function such as cleaning the heads. I tried a soft reset and hard reset, but this proved unsuccessful.

  He's tired? Should I just throw it and head to the stores again?

  Thanks for reading this,

  Fatiha

  Hi rich,

  I replaced the cartridge magenta yesterday and my printer works successfully again! Woohoo!

  My father, an electrician, so between us we have come to the conclusion that when the power came back after the crash there was an electric pick or insufficient tension than normal and this has damaged the chip of the nearest power - the magenta cartridge ink.

  All is well again in any case.

  Thanks for your help - I appreciate it

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• Time scale does not properly after separation of the two signals of virtual channel

  Hi all

  I have a problem when I use a virtual channel with two analog inputs. I'm cutting the two signals into two separate tables of waveform, as shown in the attachment. The two signals seem to be reading very well, the problem is that the time scale (x-axis) begins to act on the strange. Seconds displayed time seems to keep jumping up and down at a high frequency, resulting in the two signals of displayed does not correctly in the table of waveform. Could someone please try to help me? Any help would be greatly appreciated!

  Thanks in advance.

  Try to acquire a signal with first time information. You can replace the DBL 2D with a data type of 1 d wave. You don't need this code extra silly - just a function of Board Index to get the separate channels.

• Created by af:table program does not properly

  I have this JSF page:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" 
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="myFirstPage.jsf" id="d1">
      <af:form id="f1">
            <af:table binding="#{createAdfComponents.table}"/>
       </af:form>
      </af:document>
  </f:view>
  
  

  Here's the bean "createAdfComponents":

  @ManagedBean(name = "createAdfComponents")
  @SessionScoped
  public class CreateAdfComponents {
      public String[] columns = new String[]{"customerID", "firstName", "lastName", "address", "dob"};
     
  
      private RichTable richTable = null;
      public RichTable getTable() {
          return richTable==null ? richTable=createTable() : richTable;
      }
  
      private RichTable createTable() {
          RichTable table = new RichTable();
          List<Customer> data = getCustomerList();        
          table.setValue(data);
          table.setVar("c");
          table.setRowBandingInterval(0);
          table.setId("t1");
          int i =1;
          for (String column : columns) {
              RichColumn richColumn = new RichColumn();
              richColumn.setSortable(false);
              richColumn.setHeaderText(column);
              richColumn.setId("c"+ i);
         
              RichOutputText columnValue = new RichOutputText();
              columnValue.setValueExpression("value", createValueExpression("#{c."+column+"}", getClassType(column)));
              columnValue.setId("ot" + i);
              richColumn.getChildren().add(columnValue);
             
              table.getChildren().add(richColumn);
              i++;
          }
          return table;        
      }
      private ValueExpression createValueExpression(String valueExpression, Class<?> valueType) {
          FacesContext facesContext = FacesContext.getCurrentInstance();
          return facesContext.getApplication().getExpressionFactory().createValueExpression(
                          facesContext.getELContext(), valueExpression, valueType);
      }
  
  }
  
  

  And, for completeness, here's the Customer.java class:

  public class Customer {
      private long customerID;
      public String firstName;
      public String lastName;
      public String address;
      public Date dob;
      public long getCustomerID() {
          return customerID;
      }
      public void setCustomerID(long customerID) {
          this.customerID = customerID;
      }
      public String getFirstName() {
          return firstName;
      }
      public void setFirstName(String firstName) {
          this.firstName = firstName;
      }
      public String getLastName() {
          return lastName;
      }
      public void setLastName(String lastName) {
          this.lastName = lastName;
      }
      public String getAddress() {
          return address;
      }
      public void setAddress(String address) {
          this.address = address;
      }
      public Date getDob() {
          return dob;
      }
      public void setDob(Date dob) {
          this.dob = dob;
      }
  }
  
  

  Now, when I run the above on IntegratedWebLogicServer JSF page in JDeveloper 12.2.1...  The columns in the table, but instead to display all the data, the page keeps refreshing repeatedly.

  And in doing so... I see the following exception in JDeveloper console output:

  javax.el.PropertyNotWritableException: //D:/JDeveloper/system12.2.1.0.42.151011.0031/o.j2ee/drs/Application1/ViewControllerWebApp.war/index3.jsf @8,59 binding="#{createAdfComponents.table}": The class 'CreateAdfComponents' does not have a writable property 'table'.
    at com.sun.faces.facelets.el.TagValueExpression.setValue(TagValueExpression.java:136)
    at javax.faces.component.UIComponent.processEvent(UIComponent.java:2419)
    at org.apache.myfaces.trinidad.component.UIXCollection.processEvent(UIXCollection.java:918)
  
  

  This exception keeps showing up over and over again... Presumable for every time the page refreshes, it does so constantly with little or no break.

  Now, when he has none of the elements of input text and only items of output text, so why would he try a set operation?  Not must not only be fulfilling get operations?

  PS I'm new JSF, and ADF.

  Many thanks to all.

  The error message tells you that your bean class holding the table needs a Set accessor method for the table. The Set accessor is called by the framework when the page was created.

  Add a setTable (RichTable t) viod your beans and it should display the table.

  As you initialize it the table the first time that call you the Get accessor, you need not store the table through the Set accessor.

  Timo

• Develop the mode in Adobe Lightroom CC does not properly after reinstall.

  I recently had to switch computers because of an accident of BSoD on my main laptop edition. I could recover my photos and I installed CC Adobe Lightroom on my temporary until I can get a new one. When I open Lightroom, all seems well until I can get to the point. Then the picture is viewed on the screen, it shows a very distorted and looks like it was taken in infrared or high intensity histogram colors. The preview box in the left corner and the roller on the bottom of the screen looks normal, but the editing screen is not the original photo. Help.

  Hi Erin,.

  • Please select Edit > preference > Performance > uncheck "use graphics processor.
  • Restart Lightroom.
  • If this dioes does not help post screenshot of the problem

  Let us know if this helps

  Concerning

  Assani

• Windows Windows 8 does not properly after deleting important files to user (already tried everything I found things different from +-10)

  well, I'll start from the beginning.

  the first big mistake I did was change the permissions of the administrator until he was the same trustedinstaller (without this I wouldn't do stupid things, but I did it for a change of details in the registry)

  the strange thing that I've been in conflict with, is that this pc was my mother, so everything to his e-mail address and his name 'Nancy' after some time she gave me the pc so I made my own top user account named "maxim" (that's my name) on my email address and probably deleted the user account from my mother named Nancy so no problem until something has started to bored

  the usersection in solution under C: contained Explorer still card Nancy with some of its documents on the left and some (I have something windowsrelated files)

  so I thought why not remove that card and saw that a card with my name was there too in the usersection, these same unknown files which I think are windowsrelated (btw, these files were hidden but ofcourse to check everything I have chekced the area to see hidden files in Explorer)

  I know not the name of all the files that I have demolished within this named Nancy in user card, but as far as I know, is that files that I noticed (these hidden files) are 7 files ntuser and those who are also in the plan named maxim in this usersectionso I thought no problem and delete the files as managed (with edited permissions)

  now I certainly delete files that I wasn't allowed to, and who were required to run windows properly, I know that, because of the errors, I am when I try to start things or when I try to fix things

  now I searched a LOT on the web especially in the microsoft forums and I fount a lot of 'solutions' that did not work for me

  most of the time, it was because I get an error because I could not more process these configurations etc.

  and somethimes as the scan SFC, he said that the correction of some problems, but there are many problems left that cannot be repaired in this way

  also almost everything I'm doing atm (also when I try to fix my problem) that I have to do with a big traverse most of the time I use "this run dialog box" or the command prompt

  now, these are all the things I tried

  -each 2013 thing tuneup utilities can do (scans included registery) of course I don't know the exact names of the files important I lost so I couldn't those used with tuneup

  -do you have some full scans with Norton 2013 (did not find any problem)

  -does this scan SFC and said there are still problems and has not noticed any difference

  -tried to update my pc did not work (missing windows services)

  -a tried to restart something in the registry did not work (missing windows services)

  -tried to make a new user on my pc did not work (missing windows services)

  -also tried lots of windows, fix things program (I forgot the name of it, but he could only tell me that he had problems and could not fix their)

  I'm shure that I have tried many other things so I mentioned in any case but I forgot the

  Many thanks if someone can help me out as sorry for the great story, but I wanted to tell all I know because it's a sensitive issue and please don't mind my bad English :)

  Maxim

  Your Windows product key can be printed on a label located on the underside of your laptop, if you don't you won't have it. Using the recovery partition, it is a good idea if you have no recovery on a disk media, often there is a Windows repair option, you can try this, however if there is no data on the first partition that you interested, I recommend you just format the partition for essentially erase everything on it and reinstalling Windows on the recovery partition. This will probably not require you to reactivate Windows by using the product key.

  If you cannot use the recovery partition to reinstall Windows, then you can go to this page (on the computer that is working properly) http://windows.microsoft.com/en-us/windows-8/upgrade-product-key-only and click on install Windows 8, save the file, run it and choose Install by creating media. This you will get an ISO file that you can burn on this disc you mentioned, just put the disc in your computer, right click on the ISO file and choose burn. It should also not ask to reactivate Windows, if you did no major hardware changes to the computer.
  Again, I would like to know if you need help with any of these steps or if none of these steps work for you.

• Program does not work after downloading the sp2 and sp3

  After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• the Windows Setup program does not work after restoring

  Since I restored my system, when I try to open excel or word, I get a windows install. Even after installing windows install 4.5. How can I get excel and word to work?

  Hello

  1. could you give us the exact error message?
  2. do you get this error only when you use Excel?

  Method 1.
  I recommend you to reregister the Installer engine.
  Here's how:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
   
  MSIExec /Unregister
   
  MSIExec/regserver

  
  Method 2.
  

  It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Some programs does not work after you run error check.

  My computer was not start properly, so I ran error check, and there are all sorts of bad clusters and fixed them. Now, most of my programs work with the exception of MS Office programs and I Tunes. The message arrives that Windows is looking for a solution, but it never comes to the top with one.

  If you want to say that chkdsk, and who has reported and isolated bad clusters, that means that you drive has failed and you should immediately backup of data before buying a new drive.

  If the drive has which went wrong until it's too late to create an image backup, so you will need to reinstall all origonal media on the new drive.

  I hope you did your recovery discs, when you got the PC.

  The HD machine will have a free disk bootable verification utility, if you want a second opinion