Programming a module FlexRIO FPGA to computer?

Similar Questions

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Lately everytime I open firefox I get the window «do you want this program to make changes to your computer...» »

  Hello

  I would be so grateful to know how to fix t his, because it's really getting on my nerves.
  

  I have windows 7 pro 64 bit. I mostly always use firefox. Whenever i opened a  new browser, I never got hit with the windows badge and "Do you want this program to make changes to your computer...." or something to that effect. YOu who have windows 7 know what I mean. Of course I click yes, but I NEVER had to do this before. I don't know what changed, what might have happened. I had to have help with some software unrelated to firefox and someone had remote work on my notebook, but he should not have changed browser settings. It is really irritating me to now end to always open the browser now and have to hear that annoying thing and the badge.
  

  My other browsers IE and chrome do not do this.

  How can I fix this? It was never the case before for years.
  

  Thank you thank you very much in advance. I can't use this browser if that's going to happen, he finds himself on my nerves.

  A possible cause of this message, it is that Firefox is configured to run as administrator.

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.
  If you cannot make changes, and then start Windows Explorer as an administrator.

• Whenever I try to login, I get: "you want the following program to make changes to this computer?

  A few days ago, I started getting the following message EVERY time I try to open a session:
  «You want the following program to make changes to this computer: it lists the FF and Mozilla Corp.»
  I have to click 'Yes' EVERY time, and then it seems my Comcast home page.
  I have a PC with Windows 7.

  In addition, when my home page appears, 3 small icons at the top right do not appear. (Minimize, X)

  A possible cause of this error is that Firefox is configured to run as administrator.
  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• How to uninstall Firefox. It apears no uninstall program for Mozillla Firefox on my computer. I tried all the suggested and nothing works.

  I did everything what your website says to uninstall Firefox. Nothing works. Windows message says no uninstall program of Mozilla Firefox on my computer. Do I need special download on your part to uninstall?

  Thank you, whiskeydog

  This issue arose in April. I was able to solve it using Revo Uninstaller.

  Concerning

• Each time you start firefox asked me if want to allow the program to make changes to the computer

  Whenever I start firefox, I wonder if I want to allow the program to make changes to my computer. Do not have this problem until I updated to the new version.

  This has happened

  Each time Firefox opened

  == I've updated to the new version

  Check that you are not Firefox running as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  In the Compatibility tab, make sure that this level of privilege: "Run this program as an administrator" is not selected.

  You should also check the firefox.exe program properties in the Firefox program directory.

• I cancelled all MacKeeper programs and got a refund... Now, my computer is not as fast and it freezes at the time.  MacKeeper was costing me too much money... all programs it will speed up my computer. ?

  I had problems with MacKeeper, I loved MacKeeper but then came the renewal notice.

  1 the $49.00 then update for $142,00 then another for $149.00 at the point where I was going

  be finished it would have $500.00 more... I was so upset about MacKeeper I canceled

  the whole program...   Now, my computer is not as fast and sometimes freezes... No matter what? I can do

  to speed up my Mac?  ... any help?

  If you have created a Time Machine backup before install and use MacKeeper, follow the instructions under 'All restore' in the following Apple Support document: use Time Machine to back up or restore your Mac - Apple Support.

  If you have no backup, read below.

  Recovery procedure

  Follow these instructions if uninstalling MacKeeper alone does not lead to a usable System.

  • If you have a backup that you created before using MacKeeper, now is the time to use it. To boot OS X RecoveryTime Machine in Mac OS X utility screen, select restore from a Time Machine backup. Choose a date prior to the installation of MacKeeper.
  • If you don't have a backup prior to the use of MacKeeper, create one now. To do this read to use Time Machine to back up or restore your Mac.
    • The recovery procedure require that you erase the Mac using OS X Recovery, and then create a new user account whose content will be empty. You can then use Setup Assistant to migrate your essential documents, including photos, music, products of work and other essential files.
    • To erase and install OS X read How to reinstall OS X on your Mac.
      • Follow the instructions in this document under wipe your drive and install OS X.
      • Then follow the procedure to move your content to a new Mac.
      • When asked how you want to transfer your data, select transfer from a Mac, Time Machine backup or boot disk.
      • Under Select the information to transfer, select only your previous user account and do not select 'Applications', 'Computer and Network Settings' or 'other files and folders. Deselect these choices.
    • After using Setup Assistant, you will need to reinstall the essential software that you might need, once more without forgetting to install the software from their original sources and by omitting all non-essential software.
    • "Non-essential software" is a broad category that includes, but is not limited to the products 'antivirus' third party 'cleaning' and 'maintenance '.

• How can I transfer my microsoft money program and data, to a new computer, I bought recently

  my current program of money on the old computer, I think, is free to download, about 3 years ago.  my new computer is windows 8.

  I just loaded my old msmsoney2005 old desktopto my new laptop, with all the old data.  I do not know if someone sill cares about this... but I have loaded version sunset from the links below and then simply opened my backup file in my last session of money - which I had saved on an external hard drive.  all this took about 5 minutes, painless and accurate and works beautifully. my old office ran on windows xp, now I'm running on windows 8, free of charge. Thank you!

• Pavilion dv7 programs closing and opening at random, computer stops randomly

  I have a Pavilion dv7-6154ea running on Windows 7. I've had it for a year and a half now and I just encountered this problem (it started a few days ago).

  The problem is that some programs or files are opening and closing by themselves, randomly without doing me anything. Sometimes even whole computer stops himself. And it's not as if it crashes, it just closes programs in the usual way or stops normally (without any problem).

  I scanned the entire computer for viruses and it is clean. If the problem seems not be caused by a virus.

  One thing that I was doing at the same time when this problem occurred is switchable graphics mode in the BIOS change, dynamics on fixed, by following the steps in this link to The switchable Graphics Mode

  I have a built-in Intel GPU (that to speed up performance) and an AMD Radeon HD 6490 M GPU (that of better graphics) and I wanted to run the PC on the AMD because I think that the dynamic mode has not changed the GPU when I needded, for example for video games.

  However, after a day of opening/closing by themselves programs, I decided to return to dynamic mode, and nothing has changed, so maybe it's also not the cause of the problem.

  In any case, it seems too convenient that the problem happened right after I introduced the Switchable graphics in the BIOS mode, if I don't think it's a coincidence.

  Can someone help me? It becomes very awkward to have a program that I use at the moment of the computer closa.

  Thank you

  sthri,

  It doesn't sound like it's a virus, but it could also be the keyboard.

  Go to start

  Type ease.

  Press enter

  Go to the bottom and click, facilitate the use of the keyboard.

  Check all the boxes and click OK.

  The keyboard will not work, but move and open programs as you normally use the computer and see if you get any errors.

  It is a shot in the water.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• I am trying to run creator of disc Toshiba to create an audio cd, but when I double click top he asks me if I want to allow this program to make changes to my computer, if I choose Yes or no it does nothing.

  I am trying to run creator of disc Toshiba to create an audio cd, but when I double click top he asks me if I want to allow this program to make changes to my computer, if I choose Yes or no it does nothing and does not start...?

  original title: Disc creator does not work...?

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if they help.

  Step 1:

  Test if the problem persists in a clean boot State.

  Note: Make sure that you do not disable while Toshiba disc creator in a clean boot state, and don't forget to follow the steps in the article to restart your computer as usual.

  Step 2:

  Reinstall the Toshiba disc creator and check if that helps.

  http://support.microsoft.com/kb/307895 - for uninstall.
  http://support.microsoft.com/kb/305548 - install.

• I have no program for the sound in my computer what recommended you

  I own a sound program of error delete the my computer what can I do?

  Hello

  1. you have the driver CD?
  2. What do you mean by its program?
  3 did you do changes on the computer before the show?
  4. what exactly is the problem you are having?
  5. you receive an error message?
  6. You have sounds on the computer?

  Method 1:
  You can run the sound troubleshooter and check:
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918/NL

  Method 2:
  You can also install the sound drivers and check:
  How to update a sound card driver in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/166774

  You can download the audio driver on the manufacturer's Web site.

  You can also check out the link:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• When install us Windows XP (SP3), our program in the will of the computer and lost the installation files?

  Windows XP SP3 installation

  When install us Windows XP (SP3), our program in the will of the computer and lost the installation files?

  When install us Windows XP (SP3), our program in the will of the computer and lost the installation files?

  The answer is that all of your files, folders, and programs should remain in their normal form. However, backup your personal files is always a good idea.

• We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  We moved and we lost the record to go with the microsoft download number modules to our new computer and it will not let us download micro Word > how do we get this registration?

  Unfortunately, if you have lost the product keys for Microsoft software, you will need to buy new software.  Visit the Microsoft store on genuine Microsoft software.

• are you able to delete all old microsoft security updates or other old updates for programs that are running on my computer?

  in Add or remove programs on my computer there are a ton of old program updates from 2008 to 2011 and I want to know if I can remove all but the updates for programs that are running on my computer?

  Hello

  You can clean your system using the disk Cleanup utility to remove unwanted programs from your system. Click on the link below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

• Whenever I open Word 2007, UAC asks if I want to allow the program to make changes to this computer

  original title: notification of user account control

  Whenever I open Word 2007 notification of the user account control window appears, asking me if I want to allow the following program to make changes to this computer. How can I stop this and why this is happening? This only happens with Word 2007.

  Whenever I open Word 2007 notification of the user account control window appears, asking me if I want to allow the following program to make changes to this computer. How can I stop this and why this is happening? This only happens with Word 2007.

  Hi kathleen,.

  When this happens, bottom right of the window that appears, you will see blue' when thease noticefication appears, click on it and then just pull the slider down a notch by default.

  hope this helps

  ASHLEY No.: 1 FAN OF MICROSOFT AND WINDOWS 7 do not forget if you tick the response as correct, vote for him as useful to help other users find a solution faster