Programs for Hewlett Packard

Similar Questions

• Operating instructions for Hewlett Packard OJJ4500 washer version 10

  Where can I find Instructions for use of Hewlett Packard OJJ4500 washer version 10

  Hello

  Please, try the following steps and let me know what happens:

  1. Open Control Panel > Add / Remove programs.
  2. Locate Flash from Adobe / Macromedia Flash, select it and click on uninstall.
  3. Install the latest version of Flash by using Internet Explorer (a different browser can only install a plugin for the browser) here
  4. Insert the installation CD. Close the installation windows.
  5. Open my computer, right click on the driver CD, and then click Browse.
  6. Enter in the installation folder.
  7. Enter the folder of SolutionCenter.
  8. Right-click SolutionCenter.msi (can be identified by its other icon) and choose repair. Aprove that any error or prompt until Setup is complete dialog box.
  9. Restart the computer and try running the Solution Center once again.

  Kind regards

  Shlomi

• updates failed every night for Hewlett Packard Imaging printing HP Photosmart 6520 series NULL

  Since I have my printer photosmart 6520 02/12/2012 every night he's trying to update Hewlett Packard photosmart HP 6520 series print NULL Imaging... .and it fails every time.  I have a desktop HP P 7 1010 and since I got a new printer, I have an exclaimation point on my computer and it says the problems and when you do it it's is not drivers and it shows NO FIXED.  When you close the session at night, he tries to update the NULL characters again and it fails every time.  I spoke with people from your service many times for more than an hour and they can't solve the problem.  Help, please

  I did some research on the problem of another user, and looks like it's just a ghost update.  Basically, an update 'ghost' is an update that was for the device, but unit has newer drivers which causes the update failing to keep.  The only thing you can do is to hide the update, or ignore it.  Windows will continue to try to push it, but your printer does not need it.  If she didn't need the update, it would install right.  You can find the thread where I helped another user below.  I hope this helps.

  I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop operating system Windows 7 error 80070490

• Lost for Hewlett Packard Deskjet 1055 all-in-in-one installation CD

  I recently bought a new laptop.

  I wanted to install my Hewlett Packard Deskjet 1055 all-in-one printer/copier on this new computer.

  However, I couldn't find my Hewlett Packard Deskjet 1055 original installation CD.

  I found no help in the search of this site: http://www.hp.com/go/support

  Any suggestion would be appreciated.

  dhamildogg

  Hello:

  Here is the link to the support page and drivers for your printer.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=4160071&task=

  Select the driver tab, and then select the operating system you are using, download and install the printer software and driver.

• The Hewlett-Packard 786 7 v01.02 BIOS update

  Hello

  I installed a nvidia geforce gtx 560 card ti graph in the workstation HP xw4400 of my son as a Christmas gift, and I get the following error message:

  "Your computer's system firmware includes enough information to set up and use this.

  My understanding is that I need to update the BIOS, but I can't find an update for Hewlett-Packard 786 7 v01.02 on this site. I've attached a screenshot of system information.

  Thanks in advance for your support.

  The XW4400 is currently in the BIOS v2.07 Rev A, 8 December 2010 , but the history tab provides no story at all... so I can't find the old versions of BIOS and as such can't see if it's OK to jump directly from v1.02 to v2.07 without problem...

  But the tab notes relase v2.07 includes following:

  This package contains the system BIOS (BIOS family 7 786) and BIOS image the and remote flash utility for the HP xw4400 workstation. These utilities can be used to restore or update THE system BIOS. System BIOS is the operating system
  independent.

  If the BIOS linked above is for your XW4400 that uses the BIOS 786 7 family...

  But please note that the XW4400 has only updates for XP & VISTA and not Windows8. So the XW4400 updates may or may not work as expected when it is used with Windows 8. Both such and especially with a BIOS update that can be risky, I won't use the method of updating windows (HPQFlash) flashing the BIOS from version HPQFlash may not be completely compatible Win8... Instead, I would like to use the 'flash-BACK' or "BIOS CD" methods.

  You can learn more about the different methods of updating BIOS by looking at all the README files in sp51215.exe. You can either run sp51215.exe to unzip the contents of c:\swsetup\sp51215\ (but do not perform a bios update, just close the tool) or 7-zip to directly view the content of sp51215.exe...

  [edited to add following]

  Some other info on your error code 35 can be seen here and here.

  Seems that a pilot unit 35 error code can be fixed with a BIOS update, but only if the manufacturer has taken the trouble to make the necessary changes to properly allocate resources to the card...

  As a species at HP by doing as little work as possible, my still under warranty Z210 running Win7 Pro 64 bit has issues with Estate HDD support. The last driver from HP TSRI is version 10.6.0.1002, which plays well with my hard drives Estate because they appear as removable devices... Last iRST driver Intel 13.2.4.1000 does not support the "cougar point" such chipset used in my Z210 and causes weird problems when I Estate connected HARD drive (and sometimes when not connected)... But Intels TSRI version 12.9.0.1001 driver supports chipsets "cougar point" and so I can finally esata hard drive appears as removable devices...

  Unfortunately, HP has not bothered to update their drivers for centuries and they stay with a 10.6.0.1002 defective TSRI pilot... As you seem, HP wont always do the necessary work, and it's on a support and still under warranty machine... I call it "HP." Support '...

  The update of the BIOS may or may not help your situation, but in all cases, you have still some problems with drivers and the Windows 8 to settle as the XW4400 was never certified for Win8. You may need to perform a job detective to ensure that drivers, especially the chipset drivers, used during the Win8 installed and updates post install actually support the hardware itself... He is a guy to know what is the problem that the documents appear to be getting dumbed down and therefore, you will need to do a lot of reading...

  Otherwise, you could try to install a different generation or make card but a bike may have been a more easy Christmas gift...

  See you soon...

• I can't uninstall programs Hewlett Packard C309a printer with Uninstall button. How can I do this please?

  I use Windows Vista. I installed and until recently used a Hewlett Packard C309a printer. I can't uninstall the programs supplied with the CD.

  I tried the usual method, now for the unusual please. When you push on uninstall/change, the small circle appears briefly, and then disappears. Harold H_874.

  Hello

  HP has sometimes problems with uninstalling.

  I suggest that you ask in the Support Forum of HP printer help to uninstall their software.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  See you soon.

• Hewlett Packard HP Compaq 8710: DRIVERS FOR MY HP Compaq 8710p Hewlett-Packard

  System serial number: (deleted content)

  I just installed windows 10 home 64 bit on this laptop and cannot very well the drivers for the following items:

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A07 & CC_070002

  PCI\VEN_8086 & DEV_2A07 & CC_0700

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A04 & CC_078000

  PCI\VEN_8086 & DEV_2A04 & CC_0780

  I was everywhere on your site and found the driver for this computer page.  Installed all the drivers and have narrowed it down to these two left.  It seems that this laptop is a business laptop at the same time.  It has a mooring on the bottom port.  I also have been all over google and still can not very well the drivers for it.  Please give me a link to get the drivers.  Some of the links I've tried in the forum do not work.

  Also if someone knows something about an update of the bios for this computer would be helpful also.

  Hewlett-Packard HP Compaq 8710p F.0D

  I ended up getting on a live chat with a person who, after several trys, found the right driver.  I don't remember the name of the file.  I also got a lot of response from the HP support team.  Thank you for that.  They said they want to ensure that the driver is available on the Web site.  Pending.

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A07 & CC_070002

  PCI\VEN_8086 & DEV_2A07 & CC_0700

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A04 & CC_078000

  PCI\VEN_8086 & DEV_2A04 & CC_0780

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Error message 1606 could not access network "0,0, Hewlett Packard" location

  Hello group,

   

  The message, Error Message 1606 object, could access the network location "0,0, software | Hewlett Packard' was received when I installed a new printer D1660 accompanied by an error report "http:www.hp.com/support for troubleshooting information about"Fatal Error"and"MSI. " HP Software Update. I have also tried to run the "HP" update and received only the Launcher program (HPUSETUP) Setup that would not go.  The printer works OK.

   

  Please help me to get this software. I tried to go online to support people, but they don't seem to know how to solve the problem.

   

  Thank you

  john_01

  I think I should move it to another location. The CD & DVD spot seems not to fit my problem. Please Blons this problem.

   

  Thank you

   

  john_01

• Hewlett Packard Deskjet 1055 installation disc

  I recently bought a new laptop.

  I wanted to install my Hewlett Packard Deskjet 1055 all-in-one printer/copier on this new computer.

  However, I couldn't find my Hewlett Packard Deskjet 1055 original installation CD.

  I found no help in the search of this site: http://www.hp.com/go/support

  Any suggestion would be appreciated.

  dhamildogg

  Dhamildogg, welcome to the forum.

  Here's a page download software & driver for the printer.  You can choose your operating system from the menu drop down.  The driver - software product is available in this section.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Increase the RAM of my laptop from Hewlett-Packard HP Pavilion g4!

  Greetings!

  First of all, I can't find the model number of my laptop, even if I follow these steps here, http://support.hp.com/us-en/document/c00033108

  But when I check my control panel > system and security > system, I found these details:

  Manufacturer: DriverPack Solution

  Model: Hewlett-Packard HP Pavilion Notebook PC g4

  Rating: 4.7

  : Processor Intel (R) Core (TM) i3 - 2310 M 2.10 GHz, 2.10 GHz

  Installation of memory (RAM): 4.00 GB

  System type: 64-bit Operating System

  My friend told me it's HP Pavilion g4 1001tx

  Originally, the installed memory is 2,00 GB, then I upgraded to 4.00 GB. Now my question is that I can improve to 8.00 GB? Say to 4.00 GB.

  Should what kind of RAM I buy?

  Please tell me everything related to my question.

  Your help will be very appreciated.

  Thank you

  Louie

  P.S. also how much is the 4 GB? The last time, it has 2 GB, for, we add an another 2 GB to 4 GB but it did not work. We have therefore decided to add 4 GB only. So, is it only 8 GB too?

  Also, how much is the 4 GB? Is it only 8 GB which can be installed right away?
  
  The last time, I had 2 GB and we put an another 2 GB to 4 GB but it did not work. So, we put 4 GB of RAM only. It worked.

• Hewlett - Packard HP Compaq 6000 Pro MT PC memory problems

  I have a few Hewlett-Packard Compaq 6000 Pro MT of the HP PC I want to make a memory upgarde. At the moment the memory installed on each of them is 2 GB Micron 8JTF25664AZ-1G4D1 - 2 GB DDR3 - 1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz). I bought 2 different brands with the same specification that Corsair XMS3 4 GB 1x4Go memory SDRAM Desktop DDR3 1333 Mhz DIMM 240-pin CL9 and Kingston HyperX Blu 4 GB of RAM DDR3 1333 MHz DIMM 240 pin CL9 memory generic. When mounting this new memory I get the error message sound for faulty memory. Memory have been tested on the brand of the other computer and it works fine.

  Can someone tell me what I will do in this case? I updated the BIOS as well, but still no change.

  Kind regards

  Patrick

  I not really much information but what I have found, here's a thread @Tom in the same direction as your ad material .  It shows the same symptoms as published at the end.  This person has used BLS2KIT4G3D1609DS1S00, which is the FOLLOWING.  Found on AMAZONandEWEGGN.  Also to MICROCENTER.

  Motherboards are picky when using RAM, so use what is known to work.

• HP hewlett packard Tablet: administrator password or power password HP Tablet HP

  Hello.

  I bought a Tablet HP Hewlett-Packard in good will but when I try to turn on the device an administrator password wonder, and after failing 3 times, the device gives me this code 94062100, honestly I want to just format and start using the device from scratch.

  hope someone of you can help me.

  Thank you!

  Awesome!
  Amazing, thanks mate, now asking me for a password to the user.

• Hewlett-Packard 0944 motherboard

  I have an old Compaq NC6230 and I am looking for the motherboard drivers.  I was unlucky to find any so far. The motherboard is a of Hewlett-Packard 0944; KBC version 40,22.   I had to do a fresh install of Windows XP RO and many riders are missing from the category (OTHER) on Device Manager.

  Hello:

  Here are links to the drivers you need:

  ETHERNET CONTROLLER

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447372&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_49200_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  NETWORK CONTROLLER

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447372&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48946_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI SIMPLE COMMUNICATION CONTROLLER:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447372&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48397_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Hewlett Packard Elite display E271i LED Blacklit monitor _flickerin

  Team dear HP,

  I have a new

  Hewlett Packard Elite monitor LED Blacklit E271i poster. It is connected via HDMI cable and a Port Adapter Mini video on my mac book pro Version Mac OSX 10.7.5 _.

  It's already the 2nd monitor that I had, the first has the 2nd day a flickering view and I sent him to the store that I bought.

  The new has today - 2nd day of work with him - the flickering again, short but it is not possible work during this period - I hooked it up and it worked again.

  During this phase, I can't really work on graphic works, it is very annoying.

  Y at - it a reset or how do I deal with this problem when it appears again.

  Thanks for the help! Dinah

  Hello

  You can try connecting the monitor on another pc and see if you see still flickering?

  Perhaps the problem could be the miniport-hdmi adapter.

  I had the same setup as you (adapter + macbook pro connected to monitor). The adapter stopped working after a while.