Property to tell whether the process model has been run?

Similar Questions

• Impossible to restart after the system recovery has been run, getting just ctrl alt del to restart, repeatedly

  HP Pavilion 503 with windows XP.

  Did you do a recovery with the recovery partition or recovery discs? Try another recovery. If you run of F10 at power on, look for an option on the first screen, will give a clean reinstall.

• How do you know that a spesific procedure or function has been run by the user who and when?

  
  Hi all

  Suppose I have a procedure or a function whose name is MY_PROC. Is it possible to learn that the user who has been running this procedure and when?

  Thank you

  Hi NightWing,

  You need VERIFICATION for operations.

  11.2 docs: AUDIT

  For example:

  SQL> show parameter audit_trail;
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  audit_trail                          string      DB
  SQL>
  
  SQL> conn iarsov/iarsov
  Connected.
  SQL> create or replace function test_audit
    2  return date
    3  is
    4  begin
    5  return sysdate;
    6  end;
    7  /
  
  Function created.
  
  SQL> conn system
  Enter password:
  Connected.
  
  SQL> audit execute on iarsov.test_audit by access;
  Audit succeeded.
  
  SQL> select os_username,username,obj_name,owner from dba_audit_trail where obj_name = 'TEST_AUDIT';
  no rows selected
  
  SQL> conn iarsov/iarsov
  Connected.
  
  --call the function and trigger audit operation
  SQL> select test_audit from dual;
  TEST_AUDI
  ---------
  04-AUG-14
  
  SQL> conn system
  Enter password:
  Connected.
  
  SQL> select os_username,username,obj_name,owner,timestamp from dba_audit_trail where obj_name = 'TEST_AUDIT';
  
  OS_USERNAME          USERNAME                       OBJ_NAME             OWNER                TIMESTAMP
  -------------------- ------------------------------ -------------------- -------------------- ---------
  oracle               IARSOV                         TEST_AUDIT           IARSOV               04-AUG-14
  

  Kind regards

  Ivica

• When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled

  When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors.  How can I me then chkdsk to run

  Hello

  See if these two tutorials to help you with this.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  "How to difficulty Chkdsk will not run at startup in Vista"

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See you soon.

• The guys will you please tell me the process step by step on how to transfer my products adobe on another computer?

  The guys will you please tell me the process step by step on how to transfer my products adobe on another computer? I'm not good with computers and I've already activated a few adobe creative cs 5 that some of them are in my broken laptop I can't access. Is there a way to disable them on my adobe id so that I can reuse my newest laptop serial numbers and how?

  for CS5, please see:

  How to download, install and activate Adobe applications

  Activation-deactivation-help

  Since you can't access the old computer, you need to contact Adobe to disable the application using this link: contact us.

  Please have your serial number and the Adobe ID ready.

  If you are also using creative cloud, please see:

  FAQ: Can I install Creative Cloud on several computers?

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  I'm moving this post on the forum to download, installation, commissioning

• You try to start the process J000 has expired. Please advice

  Dear team,
  
  I get lines in my .ora alert log file, and users report that they were not able to connect the database for three hours,
  
  
  
  
  Completed: alter database backup controlfile to trace
  Wed Jul 18 20:06:22 2012
  Beginning log switch checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Wed Jul 18 20:06:22 2012
  Arc1: Evaluating archive log 2 thread 1 sequence 17288
  Arc1: Begins to archive log 2 thread 1 sequence 17288
  Creating destination LOG_ARCHIVE_DEST_1 archives: ' / ora_drplive/arch/drplive/1_17288.arc'
  Wed Jul 18 20:06:22 2012
  Thread 1 Advanced to record the sequence 17289
  Currently Journal # 3 seq # 17289 mem # 0: /ora_drplive/log/drplive/redo03.log
  Currently Journal # 3 seq # 17289 mem # 1: /ora_drplive/logmirror/drplive/redo03.log
  Wed Jul 18 20:06:22 2012
  Arc1: Archiving newspaper wire 2 1 sequence complete 17288
  Wed Jul 18 20:37:15 2012
  Filled checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Thu Jul 19 04:36:08 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:38:15 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:40:21 2012
  
  
  
  
  I checked some view as
  
  
  SQL > select * from v$ resource_limit;
  
  RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
  ------------------------------ ------------------- --------------- ---------- ----------
  process of 49 50 50 50
  51 59 60 60 sessions
  10 20 810 810 enqueue_locks
  10 75 8000 UNLIMITED enqueue_resources
  ges_procs 0 0 0 0
  ges_ress 0 0 0 UNLIMITED
  ges_locks 0 0 0 UNLIMITED
  ges_cache_ress 0 0 0 UNLIMITED
  ges_reg_msgs 0 0 0 UNLIMITED
  ges_big_msgs 0 0 0 UNLIMITED
  ges_rsv_msgs 0 0 0 0
  
  
  SQL > show parameter JOB_QUEUE_PROCESSES
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  JOB_QUEUE_PROCESSES integer 10
  
  
  
  Please sometimes what to check, how to solve this problem, because it comes every night, full backup also arrive and script to archive clean also run during the night.

  YM says:
  Uh,.
  I'm sorry Osama I don't see your answer. Excuse me...

  No problem.

• Can someone tell me where the mailsent.log has been archived?

  I checked my mailsent.log and I can't find where the archived file.

  Can someone tell me where the mailsent.log has been archived?

  First, go to the ColdFusion Administrator and check if the option 'Save all mail messages sent by ColdFusion' was checked. The file mailsent.log must be in {directory ColdFusion or cfusion} /logs/

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The task manager has been disabled by the administrator. Is there a quick fix?

  Using Widows XP Professional, Version 2002, Service Pack 3

  Fast enough

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, since it has no Group Policy Editor in XP Home and only
  really does not tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you remember.
  something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem)

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.

• Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Hi, Rlayhee,

  Printer brand/model?

  Start > Control Panel

  Select the Printers folder

  Right-click on the printer icon, then select open

  Are there pending print jobs

  If Yes, click on file > cancel all Documents

  Close the print queue and the printer folder

  Try printing again

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printer (if any)

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Restart the computer to Windows to reinstall the drivers

  Go to the manufacturer's website and search for driver updates

  Try printing again

• The Nikon d5500 has been added is supported with Adobe Lightroom 4.4?

  The Nikon d5500 has been added is supported with Adobe Lightroom 4.4? Thank you.

  No, it isn't. In fact, it is not supported by ANY version of Lightroom at the moment. DNG converter 8.8 supports the model, and you can use it to create DNG copies that can be used in Lightroom 4.4. But the d5500 has been added will never be supported in Lightroom 4.4. Support probably will come in the next update or upgrade.

• You can restart AE comp in the queue that has been updated?

  Whenever I have reset the status after changing the comp in AE and savings, it seems to "remember" the comp in the State, it has been added to the Media Encoder. I don't understand how this is useful at all. It would be much better if I could have all my comps saved in Media Encoder and then I could just fire and code once I updated my work. Have to select the output folder and rename the output file when we work on 40 + restores at the same time is a waste of time.

  Am I missing a piece of workflow for this?

  After making changes to a composition in After Effects, you must choose Composition > add to the Adobe Media Encoder queue again.

  When you use the add to the command of the Adobe Media Encoder queue, After Effects takes a snapshot of the current state of your model. This snapshot is saved in a file temporary .aep, and that's what Adobe Media Encoder uses for rendering.

  The advantage of this workflow is that you can start the version of your model rendering, and then continue to work on B while version than version is rendered.

  Another way to add After Effects compositions to Adobe Media Encoder is to choose file > add After Effects Composition. In this dialog box, you can choose the initial project of the source, and then select one or all the comps in this project to add to the queue.

• How to record on the mixing in mono, 0 db reduction in volume in mp3 64 bps? Sounds simple, but about all the support staff has been able to do.

  How to save on mixing in mono, 0 db reduction in volume, (same volume as in the files-no - 3 dB reduction) to MP3, 64 bits/s? Sounds simple, but about all the support staff has been able to do.

  Several solutions to this problem.  I think that we have discussed on the support email, but I will share this new here so that he can help others as well.

  Firstly, as I have explained in the e-mail, default, hearing support right Pan that prevents content mixed to a stereo field centre to be stronger than the same worn out content far left or right.  This provides one - drop 3dB to center the content by default, but you can disable it completely by entering Preferences > multitrack and by setting the Mode panoramic default to left/right cut (logarithmic)

  

  Now, when you create a new multitrack session, there is an option to specify the captain multiplexing.  Here, you can select Mono, stereo or 5.1 and it will be the mode of multiplexing by default for a mix of base operation regardless of the content of your video, but can be overridden when you export a mix of session.

  

  Then, if you choose the menu item multitrack > Mixdown Session to the new file... always by default is the captain of multiplexing.  This command does not write to disk, is a not preview or pre-processing.  If you want to export your mix multitrack session directly on the disc in the desired format and multiplexing file, use the command file > export > multitrack mixer > whole Session... You will have then the full set of output options, including the entire line output option that you like and the format you prefer.

  

  Here, I have disabled by default 5.1 output and selected a Mono mix instead.

  

  I've now changed the parameters of format as well as MP3, 64K.

  With most of these configuration details, you only need to define their time and they will remain the default values for subsequent projects, except change again.  The dialog box export a multitrack mix will reset the mix options to match the default output and the MP3 settings can be updated to reflect the closest Kbps setting of the sampling frequency of your session.

• Why to start Firefox message appears that "the color palette has been changed to Windows 7 Basic"?

  I am running Windows 7. When Firefox starts the message that arrives the color scheme has been changed to Windows 7 Basic. The message then continues to talk about the incompatible program. When I close Firefox to the colors return to normal. It has just begun to happen.

  Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.

  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.