PROTECTED M800 auto boot up after connected with lan cable

Similar Questions

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• The blue windows screen Driver_irql_not_less_or_equal 7 when connecting the LAN cable?

  Hi all,
  I just want to ask how to solve Driver_irql_not_less_or_equal windows 7 blue screen when connecting the LAN cable?
  pls help me...
  Thanks in advance...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• Adobe products cc show trial yet even after connecting with a subscription account

  Everytime I open adobe photoshop or adobe first pro cc cc, he asks me to log in, after connection it said no subscription found where I connected with an account with subscription. Also it asks me to enter the serial number for adobe photoshop cc/adobe first pro cc. Please help as a matter of urgency

  Thank you

  Ask the serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

• WWAN works do not with lan cable

  Hello everyone,

  I recently installed new card 'Ericsson 3507 g Mobile Broadband minicards Network Adapter' on my x 200 (Machine type 74542JU, XP PRO SP3), driver downloaded and installed on Lenovo's site.

  And the card works fine with different Sims (conn edge or 3G).

  But when I plug the cable into my LAN card, I can't connect to the internet.

  Icon WWAN connection in the bar of tasks remains active, "Thinkvantage Access Connections" (v5.33) Watch also 'connected' status, but somehow can not connect to the internet.

  When the Lan cable is plugged in "Thinkvantage Access Connections" is "diagnostics", when I test the "connection", he wrote "unable to internet connected" with error code 018 and "verify the firewall configuration.

  I thought that maybe firewall ESET is the problem, but I after you have uninstalled all ESET Smart Security and now using only the XP firewall, but problem remains.

  When I plug the Lan cable, I can then connect to the internet without any problem.

  Configuring IP on WWAN is automatic, on LAN address is fixed, I want to connect to the network server.

  Any help please, it's beyond my limits.

  

  Your address a fixed IP on the LAN cable a defined gateway address?

  If so, get rid of it.  Multi-hosted research for more information.

• Connection of LAN cable test failed

  I did a diagnostic test on my laptop and all the successful test except test of connection for the Lan cable. He came back as a critic. -What it means and how to fix it?

  Have you had the laptop plugged into a router or a modem when you ran the test?

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• iMac hangs after connecting with the interminable spinning beachball, but works in safe mode.

  Plug

  iMac 27 "(mid-2010) running Os X El Capitan 10.11.4"

  Processor: 3.2 GHz Intel Core i3

  Memory: 16 GB at 1333 MHz DDR3

  Problem

  With a normal startup, iMac will start properly and I can successfully connect. Once connected, I immediately get a popup window stating "To open"CS5ServiceManager", you need to install the runtime Java SE 6 legacy." I have the opportunity to click on 'Détails' or 'OK', if I click on what anyone, I immediately get the spinning beachball. I'm sure that he ran the updates at night, because the next morning was when problems began to occur.

  With a sure start, I can connect properly, everything is and I can open applications, it's just very slow.

  What I have done (in no particular order)

  1 Ran first aid utility disk

  2 reinstalled OS X El Capitan

  3 reset the NVRAM

  4. the elements of disabled opening (Dropbox and Google Drive)

  4 Ran correctly in Safe Mode, but when I rebooted the problem still occurred.

  Recently I also upgraded my RAM from 8 GB to 16 GB, it has greatly improved the performance of the machine, and I don't have any problems so far.

  I'm almost to the point of wiping the device to its factory settings, because it is so frustrating me. I really don't store anything on site, everything is in the cloud, or on an external hard drive.

  Flora-flora,

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Switch ports connected with cross cable on the same switch...

  Hi experts,

  Just got a doubt.

  If both a stand-alone switch ports are connected by a crossover cable, how will be the stp of attitude toward this scenario...

  Thank you

  Arun

  Hi arun,

  As we all know the switches use according to criteria of application PLEASE:

  (1) to root the lowest BID

  (2) a low-cost path to the bridge root

  (3) OFFERED the lowest sender

  (4) minimum port priority

  (5) the lowest port id.

  So in your senario until number 4 allvalues will be equal and there will be a match tie. So for port breakage id will be used and the port with the higher port number will be blocked and low port id will be in a State of fwding.

  Example:

  If you've been through e1/1 and e1/2 cable on the same switch then 1/1 b in condition of fwding all-in-1/2 will b in the blocking state.

  HTH,

  Kind regards

  Shri :)

• My inaccessible pictures after transfer with Belkin cable - XP to Win7

  I transferred my files from Windows XP to Windows 7 on my new computer using the Belkin transfer cable.  Everything seemed to work end up until I try to access my images... I get a message that says that the file is not available and that access is denied.  Any ideas, what was wrong and how to fix it?  Thank you

  I have no idea if they are encrypted or not... If if it was not done intentionally... I have no backup... they have been very well on my old computer with XP, but are inaccessible on my new computer with Windows 7...

  Thanks for the suggestions...

  You can easily find:
  1. Right click on the file.
  2. Click 'properties '.
  3. Click on "Advanced".

  Is the file encrypted or not?

• iPhone 6 has ran out of battery juice, but won't turn on after connecting the power cable.

  Hello.

  I have an iPhone SIMless 6 (iOS v9.3.2) who missed the battery nothing to juice and turn off the power. I plugged the white USB power cable to a Windows laptop, but nothing happened. No power on, sounds, etc. I even tried another power cable and the source (power supply AC adapter and cable for the iPad). I don't even know if it is supported or not.

  Thank you in advance.

  If it is disabled on its own because of lack of power, it will take some time before he can return to the top.

  Plug it in and leave there for at least 10 to 15 minutes.

• wireless connection with the unidentified network

  Hello

  I have recently moved house and who to connect my computer to the wireless network that we installed. He works to connect said however that the network is 'unidentified' and I can't connect to the internet. I tried to diagnose the problem, but nothing seems to work. There is nothing wrong with the router, because it works with all other computers in the House except our HP computers two and it works whenever I connect with the cable, but not wifi.

  I've had the laptop for about 5 years now.

  Computer: HP Pavilion DV6824eo PC entertainment network

  Operating system: Windows Vista 32-bit

  I would be very happy if someone could help me with this!

  Lovisa

  I managed to fix everything at the time, had to download the latest version of the WLAN ahteros driver.

  Thank you very much!

• Lost my wireless with a lan cable connected

  I have an old Airport Extreme Base Station. Now I connect a LAN cable to connect the German Entertainment TV.

  The TV works and I continue to receive the signal from the airport but without data internet aka.

  If I disconnect the cable internet wireless lan working again?

  Where is my mistake?

  Dirk best

  Give us a screenshot of the configuration of EI when not working WiFi... and when it fails.

  Please click the airport icon so I can see the analytical parameters.

  Like this.

  

  What model is your AE?

  You can find the number of A1xxx on the basis or you can hold down the option key and double-click the icon in airport utility.

  The actual model will be displayed on the summary page.

  Then

  

  This modem do you have? Brand and model please.

  Is what type of broadband services?