Connection of LAN cable test failed

Similar Questions

• PROTECTED M800 auto boot up after connected with lan cable

  Hi all

  I have a problem with my laptop Toshiba Portege M800. I decided to connect a lan cable directly on the cell phone instead of using the wireless feature. However, when I shut down the laptop, it will automatically start upward. But after I unplug the lan cable and stop working properly. Can I know the config to make the laptop does not auto boot up after I closed the laptop with the lan cable connected to it.

  Hello

  I think that the boots mobile upwards because the wake on LAN in the BIOS option is enabled
  Please disable this option (in BIOS), save the changes and restart the device

  Then test this new!

  Welcome them

• After I start my computer dell laptop I connect the LAN cable to run internet ON my laptop but it doesn't detect LAN cable

  Hello..

  After I start my computer dell laptop I connect the LAN cable to run internet on my laptop but it does not detect the LAN cable, using the ultimate32 bites. (But if I connect LAN canble then start computer it works fine)

  Hello

  1 windows operating system is installed on the computer?

  2. do you think that no matter what error message in Device Manager? If Yes, what is the full and exact error message?

  3. What is the number of brand and model of the computer?

  Method 1:

  If you are using Windows 7, I suggest to see the link and try to run the troubleshooter and check if it works.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  The link applies to the Windows Vista and Windows 7 operating system.

  Method 2:

  Check the link and try using the network troubleshooter to fix the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 3:

  See the link and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• The blue windows screen Driver_irql_not_less_or_equal 7 when connecting the LAN cable?

  Hi all,
  I just want to ask how to solve Driver_irql_not_less_or_equal windows 7 blue screen when connecting the LAN cable?
  pls help me...
  Thanks in advance...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• Lost my wireless with a lan cable connected

  I have an old Airport Extreme Base Station. Now I connect a LAN cable to connect the German Entertainment TV.

  The TV works and I continue to receive the signal from the airport but without data internet aka.

  If I disconnect the cable internet wireless lan working again?

  Where is my mistake?

  Dirk best

  Give us a screenshot of the configuration of EI when not working WiFi... and when it fails.

  Please click the airport icon so I can see the analytical parameters.

  Like this.

  

  What model is your AE?

  You can find the number of A1xxx on the basis or you can hold down the option key and double-click the icon in airport utility.

  The actual model will be displayed on the summary page.

  Then

  

  This modem do you have? Brand and model please.

  Is what type of broadband services?

• Satellite P305D-S8900 - LAN cable is a schooner of connection

  Hello

  I can connect my LAN cable to my computer and the computer will detect and indicate that it is there.

  The problem is that none of the software on the computer seems to see that there is a link. Internet connection screen says that the LAN cable is a schooner of connection. I tried everthing I know so he can work with no sucsess.

  PS. I use Vista and I know little about it Vista.

  Hello

  First check to see if the network card is recognized and if the LAN driver has been installed correctly.

  It is the as-installed LAN card properly then you should check the settings of the network adapter's TCP/IP protocol.

  The properties of TCP/IP all the settings such as IP address, gateway, DNS must be set to automatically get

  Also please check if a firewall, antivirus, etc apps don't lock access to the local network.

• No lights when the LAN cable is connected by Satellite A30-141

  I'm trying to connect my satellite A30 141 to a router using an rj45 plug. When I connect to the ethernet port, nothing happens. no lights on my laptop. someone at - it how to deal with this issue. I can reset the port of a Charter service engineers.

  any help would be much appreciated

  Hello

  I put t know which lamps do you mean because I don t find any LAN LEDs on this laptop. In case you I would recommend checking the status of LAN card in Device Manager. Check if this card has been properly recognized and if there is no yellow exclamation point.

  In addition, I put t know what you expect. If you connect the LAN cable to the laptop from the LAN icon in the taskbar should usually shows the connected state of LAN cable (NO red x). If you do not see this icon please activate this option in the properties of LAN.

• Satellite A20-S103: LAN cable disconnected

  Hello

  I can not access my LAN or internet.
  I use a Satellite A20-S103 with a Realtek RTL8139/810 x Family Fast Ethernet NIC

  When I connect the Lan cable to the LAN port, the message "LAN Cable" disconnected.
  The same message is displayed using connectivity doctor ConfigFree.

  I have changed several cables, used cables that worked on other computers and the message still there and no access to the router/modem.

  Near the LAN port LEDs are not lightning (or orange or green, no)

  I already read messages here in the forum (and other forums) and I can't get the ethernet card works.

  Do you think the problem is with the card or the operating system.

  Can you help me?
  Sorry for my English

  First, check to see if the network card has been recognized in the Device Manager.
  Under network adapters, you should see the LAN card.

  If there is a yellow exclamation point near network card then the driver has not been installed correctly or there is another serious error.

  In the first case I recommend the withdrawal of the LAN card from the Device Manager and after new reboot, you should try to reinstall the driver downloaded from the Toshiba page!

  In addition, you must set TCP/IP parameters automatically because the router assigns the IP address automatically.

  Please check and report the results

  Good luck

• Win 7 crashes (blue screen) when LAN cable is plugged.

  I installed Win 7, 32 bit upgrade of Vista on my Acer 5810TZ laptop.  Whenever I try to connect the LAN cable, Windows 7 hangs on a blue screen.  When starting, computer doesn't load Windows if the cable is connected.  It worked fine with Vista.  Last Atheros drivers (hardware MFG) have been installed.  Any ideas?

  Glad to see that you got it working.

  If you see the Acer support site for your laptop, there seems to be Windows 7 drivers (and applications) which you have displayed:

  http://GD.PanAm.Acer.com/home/

  You might consider updating all drivers, sound, touchpad, etc that you can. Updates "should" improve the stability.

  You could even try the Atheros driver posted after update other drivers such as the chipset driver.

  You can always "back" the driver if you develop problems.

  In addition, this only cd/dvd burning software you have installed? You had problems with your optical drives at all?

  You have McAfee Personal firewall installed and, if so, which version?

• Toshiba NB550-111 - no connection if the LAN cable is more than 2 metres

  Hello

  My newly purchased Toshiba NB550-111(Windows 7 Starter Service Pack 1) has problems with the LAN card.
  If the LAN cable is more than 2 meters, no relation to Allied Telesyn switch (no indicator led on the switch, 2 other desktop computers already connected). I tried not to connect in a different port (one used previously by one of desktop computers), no connection. I tried with 3 cables, still no results.

  Cables (cat5E, so important) have been tested OK before with a cable Tester, and I use both of them without any problem with another 2 desktop computers at home. I set another cable (5 m long, newly purchased) and tested for connectivity. It works very well with the other two offices, no results with the netbook. I tried with adapter it works, I disabled ' energy efficient ethernet "NIC, still no connection properties page. It only connects if the cable is less than 2 meters. I tried to connect the netbook directly to the DSL router, still no connection with a longer cable.

  The device is reported by windows as work very well, and the test Toshiba utility ends there is no problem. Windows I configured in the Control Panel, the Plan balanced for maximum performance in the power options, still no results.
  Any ideas, please?

  Now maybe stupid question but what is with WLAN? You don t want to use WLAN?

• Belarc Test - test failed due to not having a wired connection

  I was offered a job online, work at home, but one of the requirements is to make a Test of Belarc on my computer.  They keep saying that I must have a wired connection, showing an IP 192 or 10.

  "A wired connection to the router is necessary.  "Wireless is not taken in charge for security reasons.  You must be connected via a router showing an IP address 192 or 10."

  my system is using premium windows 7 on a dell desktop computer. My modem is a sb6121 of the surfboard and my router is an asus rt - 53

  So how I hard my modem wired to my computer?

  

  

  Above show test it I failed, I tried to make the wired connection on the two tests but failed.

  Frederik Hello, thanks for the help, I did exactly that. I introduced my new test to see if I have success or failure but in the meantime I also copied my test results down below, did hard successfully I wire my internet connection?

  I think you did, but it is very easy for you to find out for yourself:

  1. Open a web page, for example google.com.
  2. Disconnect the CAT5 cable by pulling the RJ45 plug of router.
  3. Refresh the web page with F5. It breaks down.

• Satellite Pro U300: Error Message: cable is disconnected, but Lan cable is connected

  Hello

  I have problem with interface ethernet (wired) in my Satellite Pro U300. I use in many places (home, office, customers) and when I restore in sleep or hibernation mode interface ethernet shows that the * cable is disconnected *, despite the connection of the cable * is * connected and works perfectly with all other devices, laptops and PC.

  The switch also shows that the there no signal link. But re - activate the malfunctioning ethernet port, just disable the ethernet interface and then after 5s (1 s is too short!) turn on.

  Then a baloon in taskbar window indicates that there are 10 Mbit/s link, but actually, the link works at 100 Mbps (I can see it in the connection status window and the ethernet LEDs switch). This is the only laptop that has this kind of problems.

  I have the latest version of the installed ethernet 5.664.205.2007 driver on Win XP SP2.

  Is it possible I'm getting rid of turn on interface ethernet several times per day (except change laptop)?

  Hello

  I put t have a real solution but I have a few proposals of solution

  First of all, you should check in Device Manager if the network card has been properly recognized. The Ethernet card should be listed under network without any yellow exclamation point cards.

  If the network adapter has been properly recognized, then the next step should be checking the properties of the LAN connection.
  There, you should check the properties of the TCP/IP protocol.
  The settings such as IP address automatically get & address of DNS server automatically get must be marked.

  Greetings

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• WNDR3700 starts so that the connected lan cables.

  Hi people,

  I have a wndr 3700 for a long time. Lately, every time I wanted to turn it off, and return is on, it does not start unless I have unplug all lan cables and wait for it to start. It is very stange, because there is no problem with it. Once it starts, it works fine. but I have to disconnect the cables and wait for the boot sequence.

  no idea how I can fix this problem?

  Thank you.

  I think I did. I flashed with ddwrt and now it starts at each connection to the local network. so it was probably a software issue or a hardware but ddwrt can handle or ignore it. I'll try the official fw to see if the old fw was just tired :)

  Thank you all.