With the help of the external RF signal generator

Similar Questions

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• Black screen and mode standby with the message "no signal".

  Correctly, it's... kind of weird, I use my computer and the monitor for a year or 2 now and don't never had real problems. The thing is that when I got home last night I found my black screen and standby mode (as if the computer was turned off (which it wasn't)). I thought that the reset will solve the problem, and so I did and didn't get the message "no signal". All tried, reconnecting cables, reset several times I could count... nothing helped for awhile.

  At any given time during one of my restarts it reworked all of a sudden no aparent reason. So going on my daily buissiness I want to get back in the saddle, when I accidentally hit the side of my computer with a book and the screen went to 'no signal' again. Just tried again and even used my cell phone to check if the monitor was working,... now comes the weird part,... also on my laptor monitor is having problems with "no signal", but only when I do my main screen. It works as a secondary screen, but I can't get the context in which to work. (finding that I'm guessing that this problem is not related to my normal computer, but I'm not sure).

  I am running vista and got a nvidia 8800GT graphics card. Also, I noticed something that is at any time using both the hdmi cable on the graphics card or using the socket with the internal chipset of my computer makes no difference. in both cases, I get "no signal" and the screen goes to sleep... Is there someone who can help me and tell me what probably is the problem here? I'm really looking forward to the answers, thank you very much for your time and effort.

  Hi Ron Suykerbuyk,

  If you are comfortable, then try to remove the CPU cover and check if the graphics card is well connected to the motherboard. Even if it is connected correctly, you can try to reconnect the graphics card and check.

  Hope this information is useful.

• iRecruitment integration with the external Web site

  Gurus,

  Can someone help me in understanding the works of irecruitment view job openings?

  To be more precise, I'm looking for something like this.

  What should I do if I need to post some jobs to the external Web site? How this can be integrated with an external search site?

  Let's say that if I implement irecruitment what exactly should be my step so that if someone goes on a website of a particular business, click careers etc, then this page should move to an external site?

  My client said that they would like to post jobs on Monster.com etc.

  I would be grateful if someone explain to me how exactly how to proceed with?

  concerning

  Hi 922530,

  Register for external Web sites like iRecruitment recruitment Sites. It is a standard feature. Detailed procedure is available in iRecruitment User Guide.

  For 11i click the link: http://docs.oracle.com/cd/B25284_01/current/html/docset.html

  For R12...         Link: http://docs.oracle.com/cd/B34956_01/current/html/docset.html

  I hope this helps.

  Kind regards

  Siva

• Change the color of Clip from movie with the external Variable

  I have a movieclip in my flash file (WhiteBarMC) I want to be able to change the colors on the use of a variable (hexadecimal number) assigned from an external file. I found a script that comes close to what I want to achieve, but I don't know how to run the changes I need to make it work.
  
  on {(overview)
  var colorful = new color ("_root. WhiteBarMC");
  colorful.setRGB (0 x 006699);
  }
  
  It is narrow because it changes my object/Movie Clip on roll. BUT I have two problems...
  
  1) I want to set the hexadecimal color code in an external file as a flash variable retrieves and then applies to this movieclip. If it helps to explain why, it's because I have multiple variants of this swf throughout my site with a different text that just overlap the coloured bar movieclip (i.e. galleries, contacts, subject, etc.) So, with a change in an external file, I have the ability to change the color bars in the world to match the changing colors on the site.
  
  I created an external file ".txt" with only "myColor var = CC0033" in the file. I don't know if it's right, or even the wrong way, but I thought it help those smarter about what I'm doing.
  
  (2) I don't want my viewers having to "roll" to activate the change. I want it to happen during loading.
  
  
  Anyone who can help is a hero. Don't forget, I'm not this control to the action script, so a little guidance and clarity in your response will allow immensley! I owe you a dinner!

  Place this code on the root timeline containing your video:

  my_lv = new LoadVars();
  my_lv. OnLoad = function (s) {}
  If (s) {}
  var colorful = new color (_root. WhiteBarMC);
  colorful.setRGB (this.myColor);
  } else {}
  trace ("failed to load the file");
  }
  }
  my_lv. Load ("Colors.txt");

  Where colors.txt is a file with: & myColor = 0xCC0033 & (as kglad said)

• Problems with the external program

  I create programs programmer with a string. A job will be created to launch the channel. One of these programs Planner will have to call a file is under windows. Everything goes well with the exception of which translates an error indicating that the process cannot find the files referenced in the external program.
  
  Here is the error of the battery being captured in the job log.
  
  CHAIN_LOG_ID = "16735", STEP_NAME = "L90_ARCHLOGRMANBACKUP", ORA-27370: slave to the job could not launch EXECUTABLE type work
  ORA-27300: dependent operation of the OS: access enforcement officer failed with the State: 2
  ORA-27301: OS Error Message: the system cannot find the specified file.
  ORA-27302: an error occurred in: 6a sjsec
  ORA-27303: additional information: the system cannot find the specified file.
  
  This is the code I used to create the program:
  
  BEGIN
  SYS. DBMS_SCHEDULER. CREATE_PROGRAM
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , program_type = > 'EXECUTABLE '.
  , program_action = > ' C:\WINNT\system32\CMD. EXE'
  number_of_arguments = > 3
  activated = > FALSE
  , comments = > 'runs a RMAN backup compressed all archive logs generated by this process.
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 1
  , argument_type = > "VARCHAR2".
  , default_value = > "/ q"
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 2
  , argument_type = > "VARCHAR2".
  , default_value = > "/ c".
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 3
  , argument_type = > "VARCHAR2".
  , default_value = > 'C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat '.
  );
  
  SYS. DBMS_SCHEDULER. ENABLE
  (name = > ' RTDB.) ARCHLOGRMANBACKUP');
  END;
  /
  
  To verify that the files referenced in the above code and paths are correct, I spent to the DB host and run the following command from the beginning... Run:
  
  C:\WINNT\system32\CMD. EXE/q/c C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat
  
  It works very well.
  
  Someone at - it ideas?
  
  Thank you
  
  -Joe

  Hey Joe,

  What you run here are steps of external string, which are transformed into external work when they are executed (see steps chain) upwards in the view of all_scheduler_jobs so that they are running.

  All restrictions for outdoor work hold for the external chain so that you will always have to make sure that the agent Scheduler service is running as a user who has the logon as batch windows privilege and upward.

  A simple external task works for you? If this is not you should probably get that working first and then debug your chain example later.

  Hope this helps,
  Ravi.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Mid 2012 MacBook Pro starts only with the external hard drive

  I have a MacBook 2012 mid Pro and whenever I try to start it only shows the folder with question mark flashing. But, whenever I plug in my external hard drive, it boots. I also tried selecting the boot drive and the interns don't show, but once in the external plug-in, it shows externally as Macintosh HD. I also tried to reinstall OS X but it says I can't you this player.

  Thank you

  While in the drive external hard, that I hope has the same operating system, can you go to utilities utilities disk-file and run a repair of the internal drive and repair permissions? You could also do the same thing in starting mode of recovery-command keys R at startup. Using the recovery disk utilities. If you can't get the internal drive to show everyone, most likely the drive is bad. Then, you will need to replace it.

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• TCP/IP connection with the external device

  Hello

  I need establish a TCP/IP connection to my hardware device that ip (10.102.20.90) and the port no 9012 by static ip setting.

  Since I'm new to this Protocol, I am a little worried about how to make the communication between my pc hardware. Here my labwindow code to serve clinet and material as a server. Having established the successful connection, I need to read the data coming out of this port.

  Please help me make this communication happens.

  I'm working on version 9.0 of Labwindow.

  A good starting point would be to consider the application for TCP/IP client sample that is bundled with the CVI. You can find it on \samples\tcp\client.cws

  Martin.

• Syncronize to acquisition of data with the generation of signals

  Hello everyone,

  My request is generate pulses on the output of two different to drive two LEDs and acquire detected pulse signal amplified photodiode.

  Actually pulses are generated by starting the writing on the analog output, and then start the acquisition (I need 200ms on average), stop the acquisition, turn off the driving LED and develop the acquisition and record the results.

  All this in a cycle it takes about 1.5 seconds to run.

  Next step would be to drive the outputs with a waveform (duty cycle of 50% of width of 250 ms) and acquire the signal of the photodiode in synchronization with the edge of the pulse.

  I tried to use the trigger function, but the examples are not clear on how to do it.

  I use NI 9205 or 9215 to acquire signals.

  Is there a particular entry to be used as a trigger?

  Thank you very much for your attention

  Hello

  I found that NI 9205 has inputto that one be used as trigger signal, i.e. AI0.

  At latest

  Eugenio

• Vista SP2 not recognizing not not SD card with the external drive

  I have a Dell PC running Vista SP2 32 bit, and I just bought a card reader IOGear (GFR204SD, USB key with slots for SD/MicroSD cards). With the help of one of my Android devices micro SDHC cards (both brand Sandisk 16GB, I have a Droid and a tablet of Sanyo), this USB drive will not be detected, but when I click on the icon that appears in my computer, it just says "Please insert disk into drive h:" even if the card is inserted. Cards read very well if I mount them by the smartphone, but not on this device. The IOGear online chat person was no help for me until my connection has been lost, and before I asked them once again, I thought I would see if it was a Vista problem.

  Every search I did shoot a lot Info for XP or SP1, but not to SP2. And in Device Manager there is no yellow triangle exclamation the device seems to settle but the card itself does not seem to be save.

  See this article if this can help:

  How to fix the error "Please insert a disk into the drive" in Windows
  http://www.troublefixers.com/how-to-fix-please-insert-a-disk-into-drive-error-in-Windows/

• Telnet on PIX with the external interface

  Is there a way to telnet in PIX Firewall through the external interface?

  SSH is a valid method to access the site, but I wonder if there is another way to do it. PDM is another tool for access and modification of the configuration.

  Any help will be useful.

  Best wishes

  Onur

  I'm pretty sure that Telent directly to the external interface of a PIX is not available. It is such a big security risk that it is not offered as an option.

  SSH is a much better way to go (even if it's only SSH1).

  You can probably VPN in your network and Telnet from inside.

  Good luck

  Scott