PS3 problems

Similar Questions

• WRT54G/PS3 problems

  Every time my PS3 goes to the main manu, she makes my router "hiccups" and disconnects for a fraction of second and mess up some programs on the computers connected to it. How can I get it to stop?

  It of really a strange question, doesn't look like a router problem, but it could be...

  Perhaps you use your router for some time and you have not upgraded the firmware... You should try to update firmware of your router in case, if this is related to your router...

  Download the Firmware from here

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  See if the same thing happens again...

• Fragment of IP problem PS3 (netgear D6000)

  Hey guys, I recebtly was seen this problem on my PS3 where I can't play online and I have test fo a PS3 with an error that comes up saying "the router in use does not support ip fragmebts. I tried all possible solutions and my router is brand new and foesnt used to do this error, so if anyone has a solution that they thibk will help with router thia, I'd appreciate it a lot, thanks!

  Sorry, I'm using PPPOE, PPTP, L2TP, it is said he turned on!...

• RV 120W - problems with PS3

  Hi guys,.

  I have some problems to connect my PS3 to my RV120W.

  Router and PS3 have the latest firmwares. They are connected via wi - fi (distance about 10 mt, signal is good).

  IP of the PS3 is in DMZ (connection does not work with only Upnp), and ip fragmentation is turned on.

  Everything seems to work (type NAT 2), but the download on PS3 is slow as hell. My ADSl is a 6Mb, download speed on PS3 looks like more than ten times lower (I do not know how to test it...). A patch of 200 MB download is a torture.

  Two of my PC are connected wireless, so I guess that wi - fi is not the problem.

  Thanks for your help.

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  Thank you!

• PS3 XP and WRT54GS problems

  Equipment: 1 home computer: Microsoft Windows XP Home Edition Version 2002 Service Pack 2 (several others include: Vista with all updates and a MacBook Pro, but the computer is the computer with all the software)

  2 Linksys Wireless-G Broadband Router With Speedbooster. Model WRT54GS

  3 PS3 with all firmware updates

  Problem: I'm having serious problems with practically everything in this configuration... Problem: my router Linksys software gives me the error message: "problem! Internet connection does not work. "Even with this error, I always get a wireless connection on all computers, the PS3, and a PSP in the House.  I did everything the software told me to do and I still get the error message.  Problem 2: At random times when I use the internet options on my PS3 to the internet disconnects from everything, (including the PS3), and I have to disconnect and reconnect the router to get things working again.  This problem tends to occur at random times every time I use the internet on my PS3 but on my PS3 which kills the internet every time, there is a specific function: multimedia Streaming of my XP for my PS3.

  If anyone can help me to solve these problems, I would be deeply grateful!

  LELA update.linksys.com/lela/install/lela.exe update

• Problems to connect to the ps3

  Hello

  I bought the router e3200 around a month ago and everything worked well until about two weeks ago. Now, when I go on my ps3 I get internet connection and always bad cant hardly play games online more with all the GALs. IM assuming that it is the router because the internet connection is fine when I connect the PS3 directly to the modem. But the internet on my pc seems to work fine with the router, so I'm not quite sure. I tried to connect the ps3 wired / wireless, done all kinds of port forwarding but I'm still not getting the strong connection that I use to have. At first, I just wired my ps3 directly connected to the router with its default value and out of nowhere just got a low internet connection suddenly so I don't know what went wrong. If someone could give me a kind of Council, would be much appreciated.

  Thank you

  If your PC is running well behind the router without delay, it probably isn't the router causing lag.

  If you connect the ps3 with a cable he blames a delay to tell you, but if you are late in the course of the game only I wonder if you have other things running on your PC that can cause lag (downloads, torrents)

  Sometimes it also depends on what game you play online. Some games requires you to connect to one of the other players that have a connection lag.

  Also if you go to the network settings on your PS3 what type of NAT gives you in the view of the State?

  If this is the type of NAT 3, you will have a chance on connection problems while trying to play a game online.

  If it's NAT type 2, it should be good.

  Hope this helps you solve the problem

• Cisco 3825 + PS3 Media Server 1.20.412 + Windows 7 Ultimate connection problems

  Hello.

  I ve been to fight with my router Cisco 3825 for awhile and can't understand * beep * won't.

  If I use the Playstation 3 with Wifi, everything works allmost like a charm, works, PS3 Media Server, but I m having stuttering problems, so I tried to use the RJ45 to maximize the bandwidth of the side PS3, just channels wifi 54Mbps on HD streaming.

  On my laptop I have Buffalo Nfinity 300/n wifi adapter, so I don´twant to connect to the laptop with RJ - 45, but to use the wifi from the router to the laptop.

  So if I try to install PS3 with connection cable to my Cisco 3825, tried DHCP/StaticIP, the Media server will not work, even my Win 7 Mediaplayer will not work.

  So question is, is that modem so "stupid" that he used anything wifi road to RJ45 side?

  I can ping the same PS3 so it is connected RJ45, and PS3 goes to internet (laptop in wifi).

  The router should have the Upnp option, but if I use the rj-45, the PS3 says "Not available", Wifi, it is available.

  Any help pls?

  PS Sorry my English skills, but hey I m try.

  Hi poteroa!

  This model number is not part of the home page products Cisco. Good visit Cisco Small Business Support Community for more assistance.

  Thank you.

• Connection of the PS3 - WRT610N - NAT Fail problems

  Hi all

  Since I bought the PS3 in December, I was running that it connected to my Linksys WRT610N router.  The day that I have configured it first, it all detected automatically and off I went to play.  A few times, I've moved to the bedroom and played wireless.  In addition to entering the router WPA key, it does everything automatically.

  Today, the dang thing connects to the PS network.  I spent the last few hours troubleshooting 8.  I will list every little thing I did, but I have to ask myself why I never had to redirect the front ports, or anything else.

  I came to the conclusion that it is my router which is the main problem, because when I plug directly into the cable Modem, I have no problem.  Ironically, all my other devices operate on the router - phones, laptops, desktops, wireless TV and Wii.

  When I try the connection test, I get:

  -Obtain IP address succeeded

  -Internet connection successful

  -PlaystationNetwork failed

  I am able to surf the internet with the browser on the PS3 at this point, but no PSN.

  When I look at the connections and status, I get:

  -Internet connection enabled

  -Wired connection method

  -Speed and detection automatic duplex

  -Address manual settings

  Address - IP 192.168.1.20

  -Subnet Mask 255.255.255.0

  -Default router 192.168.1.1

  -Primary DNS 4.2.2.2

  -Secondary DNS 192.168.1.1

  -MAC address XX (no need to share this!)

  -MTU                           1365

  -Proxy server do not use

  -Available UPnP

  NAT - Type failed

  "Error code 80710092.

  I tried practically all the ideas of 7 hours of internet research has to offer on the following topics: "Unable to connect to PSN" and "failure of NAT:

  1. 1. -My PS3 has given a static IP address
     2. -Pedaled through different DNS numbers
     3. -Changed the MTU size
     4. -UPnP turned on and outside
     5. -NAT disabled
     6. -Someone said all ports are required
     7. -Enabled DMZ for the PS3 static IP
     8. -Off any other device trying to use wireless
     9. -Router firmware update
     10. -Restored by default on the router
     11. -Off "Filter anonymous Internet requests" (against my better judgment)
     12. N ' matter what firewall disabled (against my better judgment)

  There are only two things that I considered that I read by train:

  -Restoration of my default PS3

  It does not appear that this would be the issue but because it connects to the NHP when it is connected directly to the cable Modem.

  -To reset my router VRAM

  Looks like a longshot.

  Can anyone help me please with other ideas?  It's driving me crazy!

  Thank you very much in advance.

  I tried all the suggestions without result.  Now the problem is solved well.

  Solution?  The intensity of my internet cable signal was too weak for the router to divide anything.  That's what the tech explained to me in any case.  I was at-22dBmV and minimum of society is - 10 at the end of the cable (computer, PS3).  The technology fixed a bunch of bad junctions in the House and then realized that I was at-10 in front of my computer now.  He said that a line technician would be fate soon to take a look at the line coming because it is especially where the weakness is.

  As soon as he left, I turned on my PS3.  I got a connection NAT2.  Playstation Network still not, but it of because Sony sucks and has been offline for a while.  I'm sure that it will work as he recognixes the network is stopped and got a NAT2.

  Thank you all for the suggestions.  The moral of the story: do not exclude anything when troubleshooting.  I was sure to have been the router and waited several days before calling the service provider.

  If you're curious of your modem stats, most have an IP address to dial.

• U3014 + PS3. Problem with the display resolution?

  Hello!

  PS3 cannot expose to a resolution of the screen for Dell U3014. I use the HDMI-HDMI cable. In the attempt of a choice display resolution in the settings of the PS3 when it test the monitor may not issue image. This means that an installer of the screen may not be complete. Now the installation of the screen program gives 576 p. As you understand, it is impossible to play on it. Please help with a problem.

  Thank you.

  Niko7,

  The U3014 HDMI port can do 1920 x 1080 (1080 p).
  * With the monitor and the PS3 on and using a HDMI to HDMI (not a DVI to HDMI) cable right, turn off the PS3 via the power switch on the back and then turn back with this same switch
  * Press and hold the power button on the front of the PS3 until you hear 2 beeps. Once it turns on, the screen should display a message something like: "an HDMI cable has been detected, you want to set up?
  * Then go here to set the video output to your TV/monitor
  http://manuals.PlayStation.NET/document/en/PS3/current/settings/videooutput.html
  * When you go through Setup for HDMI setting, you will need to check what your monitor video output modes supported (480i/480 p/576i/576 p/720 p/1080i/1080 p)
  * After you go through the intial setting HDMI menu and displays your PS3 via HDMI cable, on the main menu of the PS3, go to settings and then scroll the display settings. In display settings, put the full range RGB (HDMI) to full and put Y Pb/Cb Pr/Cr super-white (HDMI) on we

• Problem downloading on PS3 3.15 update

  I downloaded the update, when the update has been installed it to 99% done and not finish the installation.  I let it sit for hours thinking it would end thereafter, but he still didn't.  Turn off the PS3 and he turned his back and it automatically starts the installation process, with the same result, that is 99% done and stops.  I repeated these steps several times with no luck.  Amybody have suggestions?

  Sounds like a question of PS3. I had the head to the Sony PS3 support forums .

• Add ps3 to homegroup problems

  well, we just got a brand new computer and we have implemented the homegroup on it for a private... my ps3 network then worked for a day or 2, then all of a sudden, he would not get my ip address so I decided to try to add PS3 to homegroup, but it doesn't even show my listed peripheral ps3... can someone help me?

  Hello jmray9531,

  1. you have to set up a wired or wireless?

  2 have you installed any updates or definitions of your antivirus before it stopped working?

  3 do you have a wired or wireless?

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  I suggest that you disable the antivirus software temporarily and see if you PS3 appears on your computer.

  Note: Please make sure that you enable the antivirus software and firewalls after the test to keep your computer protected.

  Method 2:

  Homegroups won't work with other Windows 7 computers. The PS3 is DLNA support does, make sure that the PS3 has this option by following the steps detailed here:

  http://us.PlayStation.com/support/answer/index.htm?A_ID=430

  Method 3:

  Make sure that media sharing is enabled on your computer.

  a. go to control panel > network and sharing Center > change advanced sharing settings:

  Then you must make sure that:

  -Network discovery is on
  -File & printer sharing is enabled

  b. after that, click streaming media options:

  In the bar of fall see the devices, select all networks
  You should see some unknown devices/peripherals.
  Double-click each unknown device to see the MAC address of the device.
  Find the device corresponding to the MAC address of your PS3 and allow this device for media sharing.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem recording PS3?

  I bought {S3 version of Photoshop (never used or registered) and load on my Mac OS10.} When you try to save it, I need to add the serial number for OS2 which I also have. But when I click Save it tells me that it is not connected to the internet. Looks like Adobe has stopped the administration server for PS2. How can I get around this so I can use mu PS3? Any help would be appreciated!

  Rick

  Move this thread to:download, installation, commissioning

• PS3 suddenly not working with HDMI - HP Pavilion 22bw

  I recently bought a HP Pavilion 22bw 21.5 inch monitor so that I can connect my PS3 and PC up to it at the same time, (HDMI and DVI with respect). Things worked great this day until today.

  I installed a game on my PS3 hard drive and switched on my PC. After about 20 minutes, I went back and the screen is blank. I restarted my PS3 and notcied that, if the HDMI output, has been detected (no), the screen remains black and the native control screen were flashing. Switch on my PC and everything was fine.

  I tried everything I could on the end of the PS3 (reset to the default values and all) and still no dice. I plugged it up to our flat screen in livinging room and it works like a charm. Plug back on my monitor after that showed no improvmenet.

  So, the PS3 seems fine, that cable HDMI itself looks very good as well. So that leaves just M. Monitor. I did have a problem with it before this time and I am infact my PC and monitor using right now to type this message. Any help would be much appreciated. Thank you!

  -Anthony

  It's very strange... have you tried to unplug the monitor and let it rest for a while and then by plugging it back?

• Common modules on Windows 7 x 64 and HDMI problems

  Jin
  1.), I want to run my remote, hotkey utility, and so one on my Toshiba Satellite x 200 - 22v. But... I can't find common Modules for 64-bit (even vista) version, I installed the utility Hotkey for XP on this seven and it works because of the absence of EBlib.dll (which I can't find at Google to download).

  2.) my HDMI has stopped working - I watch a HD DVD movie and TV appears black, graphic turns his back on the laptop screen and there is no more - TV this one and others. Cable HDMI and entrance to the TV factory (PS3 connected to try). What will happen? HDMI broken phone?

  1)
  Common modules as a tool exist separately for Windows XP Home edition only, and you cannot use it to Win7. For Win7, you use package of added value.
  The most important part of this package is components Toshiba driver common. It's something like the common modules for Windows XP Home edition.

  2)
  It is not easy to get the right answer. Just restart your laptop and try it again. If the problem persists, try to test on a few other TV to see what will happen.
  Post the results and let's see what may be the next step to solve this problem.

• Satellite X 200-problem resolution HDMI port

  Hello

  I have an X 200 - 1AA.
  It comes with the graphics card 8700GT. I have Windows Vista Ultimate installed and the latest Toshiba drivers for this card. (NVIDIA has universal drivers for this card).

  When I connect to the computer via HDMI to my Plasma Hitachi 37PD5200 screen, which can go with resolutions up to 1600 x 1200 max resolution I get is 1024 x 768.
  I try to change the settings in the Nvidia Control Panel, but there is no custom settings for the HDMI port. The software detects the Hitachi monitor and says it is only capable of 480 p EDTV. And I can't change that.

  If I connect via the VGA cable, works very well, with 1600 x 1200 resolutions. But the problem is that Toshiba HD-DVD player works only via the HDMI port.

  If I connect a PS3, Xbox 360 or my player to DVD via HDMI, all devices to detect 1080i.

  As someone had this problem before?
  Any ideas for me?

  Thanks in advance,

  See you soon,.
  André Antunes

  X 200 - 1AA
  T7700 2, 4 GHz CPU
  4 GB DDR2
  300 GB 4,200 RPM HARD drive
  8700 GT graphics card.

  Hello

  Very strange, I know that the satellite X 200 series supports the standard HDMI V1.2 (up to 1080i). You can watch HD DVD movies on internal Toshiba laptop screen with a resolution of 1080i pixel and external TV Full HD with 1080 p resolution.

  I m not 100% sure, but I think that this setting can be changed in the BIOS. Check it!

  Your comments would be very appreciated.

  Hi dude