Error printer HP PSC 1315

Similar Questions

• Printer HP PSC 1315 and Windows 7 drivers

  Hi guys!

  I can't find Windows 7 64-bit or 32-bit (I use Windows 7 64-bit) drivers for HP PSC 1315 on this page and if I installed the driver more former example Vista 32 or 64 bit installation wizzard could not allowed me I don't know what I can do with that. I need to use this print device. I know that this printer is very old, but I don't have any plan to buy a new one. Now if you'll excuse me I have not good English language skills.

  Message edited by coper471 on 08/19/2009 23:50
  Message edited by coper471 on 08/19/2009 23:51

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• I have the text is missing when I print HP PSC 1315

  When I print a word document, all the text is there

  Hi denise5,

  Are ink levels still OK? Printing is not a text (color or black) will be affected if one of your ink is low. Replace the ink problem if needed. Check this article.

  This article may also help - Pages continues to strange or characters truncated

  I hope it works for you!

• HP PSC 1315 all-in-one printer

  Everytime I turn on my printer it prints a test page.  How can I stop doing this and waste?

  HI - follow the steps in this post:

  http://h30434.www3.HP.com/T5/other-printing-questions/PSC-1315-how-to-stop-test-page/m-p/136906#M8915

  Probably what you see is an alignment page.  This message will provide details to solve the problem.

  Hope that helps.

• HP psc 1315 is compatible with Vista?

  Hi, I have an old printer, HP PSC 1315, I used it with my XP OS. I just want to know if I could install it too with an OS like Vista. TIA.

  Hello

  I suggest you go to this web page for some great information that will help.

  Good luck and come back to mark this as an accepted solution if it works.

  Best regards

  Park

• HP PSC 1315 does not work on windows 7

  I recently got a new PC with windows 7... I downloaded the driver for my printer (HP PSC 1315) of the HP site, but my PC does not answer with my printer.

  In the HP Solution Center it recognises my printer and shows that it is plugged in and on, but in "Devices and printers" represents a yellow mark at the printer.

  I tried everything, uninstall and re-setup, manual of rights even tried admin identify processes.

  Hello

  Please pass below for the info

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=hardware&p=HP%20PSC%201315%20All-in-one%20Printer&v=HP&UID=Q5765AABA&pf=0&PI=0&s=HP%20PSC%201315&OS=64-bit please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• PSC 1315 + seven 64 bit error scanning

  My setup is a Hp Pavilion with win seven 64-bit (with all the latest updates) and a psc 1315.

  It still works fine with the HP software but now I'm trying to scan a document to a pdf file and I the situation below:

  Windows not in use HP scanner, the scanning starts but it is very slow and when she finishes the software gives the error below.

  I try the following without result:

  -changing the mode to save (tiff, jpg, ecc) and the scanning resolution

  -restart the pc and printer

  -uninstalling and reinstalling the driver from hp and corrective software and more recently

  -performing HP print and scan doctor (everything is ok for him)

  The only way to do a scan now is directly with the windows software.

  Any ideas to solve the problem?

  

  Hello, I read the proposed guide, I'm in the first case, all versions of Flash are updates, 12,0,0,77.
  According to the guide, I have only to reinstall Hp software but I just did.

  I also ran the patch that you set (and rebooted) but nothing is changed.

  Edit:

  I am remembered that some time ago I increased the font size in windows (DPI resolution of 100% to 119%).
  Now, I tried to get back to 100% and now the HP software works well.

  At this point, I changed to new resolution to 119%, and however it works well.

• Cannot print/connection of Windows 7 for shared PSC 1315 on the XP Machine

  I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

  "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

  Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&...

  At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

  Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

  I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

  I'm a little confused on this one.  Hoping that there will be something simple, I missed.

  Thank you!

  Hello

  Kahless wrote:

  I have a HP PSC 1315, connected to a computer running Windows XP (32 bit).  This printer is shared.  I can access it from other XP machines on my home network.  I can't access it from my computer Windows 7 (64-bit).  I can see the printer is shared on the computer, but when I double click on it, I get the following error:

  "Windows can't find a driver for hp PSC 1310 series on the network."  To locate one manually, click on OK.  Otherwise, click Cancel and consult your network administrator or the printer manufacturer's Web site. »

  Then I tried to download the driver Windows 7 (64 bit) of HP and installed on my Windows 7 machine:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=CA&OS=4063&product=374568&sw_lang=

  At the end of the installation, it asks to connect the printer to the computer via USB.  Because I'm not physically the printer connected to the Windows 7 computer, I check the box that says I can't login now and go forward at the end.

  Then I tried to connect to the printer and I get the same error.  I try to locate a driver manually.  I point to c:\windows\inf\ without success (I am * if * the driver info might settle there, but I don't know what the name of .inf).  Windows says that it cannot find an appropriate driver.  Maybe I should be looking elsewhere?

  I found some troubleshooters on the HP website, but it does not give "shared printer on a network" as one of the schemes to solve connection problems.

  I'm a little confused on this one.  Hoping that there will be something simple, I missed.

  Thank you!

  Here's a good explanation of how to share a printer from an XP PC to Windows 7 PC on a network home.  It should work since Windows 7 (64-bit) PC can see the partition Windows XP 32-bit.  What you missed was the type of port to use for the network connection.

  Best regards
  ERICO

• HP PSC 1315 all-in-one: error 1632: Temp folder full or inaccessible, when you try to install HP PSC 1315 all in one

  I get the following installation error when you try to install the HP PSC 1315 all in one.

  [code 1632. The Temp folder is on a drive that is full or inaccessible.

  Free space on the drive or verify that you have permission write to the Temp folder.]

  Hi @tasos251,

  I understand that you're seen a message on your temp folder is full, I'd like to help. Please follow the steps below to clean the computer and install the software;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > AIO_CDB_NonNet_Full_Win_WW_140_408 - 4.exe
  4. After that the downloaded software and extracted, open the temp folder once again, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• How to install a HP PSC 1315 printer?

  Hello I have a hp psc 1315 I would add to my computer, how can I do

  Hello I have a hp psc 1315 I would add to my computer, how can I do

  Do you have instruction manual supplied with the printer?
  If this is not the case, contact the manufacturer of the HP printer.

  I googled education tutorial for you. Hope that helps...

  How to install a HP PSC 1315

  http://www.ehow.com/how_6173597_install-HP-PSC-1315.html

• hp psc 1315 all-in-one printer has a memory/hard disk?

  I want to have a printer all-in-one hp psc 1315. is there a hard drive than the personal information?

  Hello

  With a few exceptions, most of the printers have not memory to hold the print jobs (which are not cleared by simply turning off the printer).  The only thing that can be stored in some printers (with fax capacity) is telephone numbers in the fax log.  I don't think that the PSC 1315 has a fax, but if you really want, you can do a hard reset I think that you can unplug the printer from its power source and by holding the power and Cancel buttons down.  You may see a flashing of the lights. That should do it!

• How to stop a test print page whenever the HP psc 1315 printer is turned on?

  Everytime I turn on my HP PSC 1315 printer automatically prints a test page.  How can I turn this off?  At the same time, I was able to print or copy without a first printing test page.

  I also have Windows 7 ultimate installed with a HP PSC 1310.

  He kept printing an alignment at each start page, so I downloaded and installed the installer of HP PSC 1315 all in one series printer:

  Link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=374568&sw_lang=

  This download works for the 1300 series.

  I ran the printer align cartridge utility, page printed, put in the scanner and used the button "scan" as the 'OK' button and it solved the problem.

  Thanks for the tip of the "scan" button

• Windows 7 needs. INF file for network HP PSC 1315 printer

  I have a HP PSC 1315 all-in-one printer connected to a Vista x 64 laptop. I connected the printer with my desktop Vista x 32 before the end, however, I've recently added a desktop Windows 7 x 32 on the network computer, and I can't add the printer. I installed the drivers from HP for Windows 7 x 32 site, but when I go to add the network printer, it says I need a. INF file. It recognizes the printer, but it wont let me connect or use unless I have that. The driver INF file. I don't see why I need something else, because I have the drivers and software already downloaded. The accompanying CD wouldn't help, either, because he has only XP drivers, and I have even more.

  Try the following: go to the folder, devices and printers, add printer, a local printer, create a Port, Local Port, \\Vista64Computer\printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select HP PSC 1310 series.

• PSC 1315 all-in-one: paper jam

  My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

  Thank you

  Oldfud

  Hi @oldfud

  Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

  It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.