PSE 13, iMac, Retina, precision brushes display?

Similar Questions

• iMac (retina) - Fusion 8 - 10 Windows - very slow

  Hi guys,.

  I need help troubleshooting a Windows 10 virtual machine that runs at snail's pace. Installation program:

  -iMac (retina 5 k, 27 inches, end of 2015)

  -Processor: 3.2 Ghz Intel core i5

  -Memory: 8 GB

  -Storage: 1 TB drive of Fusion

  -Graphics card: AMD Radeon R9 M390

  -OS X 10.11.6 (El Capitan)

  -VMware Fusion 8

  -10 Windows Home / 64 Bit, completely updated according to the settings / Windows Update.

  I installed Fusion 8, installed 10 Windows using the ISO from Microsoft site and added VM Ware Tools. The installation went without any problems.

  VMware for this Windows 10 VM parameters:

  -CPU: 1 heart of processor

  -RAM: 1 GB (shown as recommended in the control panel)

  -Hard drive: 60 GB

  I adapted only screen size settings in order to have Fusion / 10 Windows using the full resolution on the Retina display (Scaled high resolution) for unity and full screen. "Accelerate 3D graphics" it's on.

  I'm now trying to use this virtual machine and it is extremely slow - both in full screen mode and one-stop shops. For example, after you click the icon on the start menu, it takes about 10 seconds until the start menu appear effectively. Chrome opening = 90 seconds. What switching applications or dragging of windows, you can sometimes watch the screen redraw. Sluggish _really_.

  OS X monitor shows only moderate, activity should the CPU activity.

  In the Windows 10 VM, the Task Manager / processes tab shows moderate (30%) Support CPU but memory, its use is constantly between 90 and 100% - even when no apps are open. However, no task stands out as a resource hog.

  I went on "Pre-allocate disk space" in the control panel merge and change RAM of 2 GB to give VM more. Performance feels a whole little bit better, but the load high memory remains even when the system is idle.

  This feels like a cheap $ 250, low-power PC. Is this normal?

  I'd appreciate any help here.

  

  1 GB of RAM for Windows 10 is far from weak. It will be 'run', but not well. Even 2 is pushing it. 1 processor is pushing it too.

  It behaves like a PC $250 because that's essentially what you have given to resources.

• Blinking cursor Windows 7 iMac, retina end-2014

  Hello

  I have problems with Bootcamp & Windows 7. I have:

  iMac (retina 5K, 27 inches, end of 2014)

  4 Ghz Intel Core i7 processor

  32 GB 1600 Mhz DDR3 memory

  Startup disk 500 GB Flash storage

  Graphics AMD Radeon R9 M295X 4096 MB

  Serial number d25PM0VSFY14

  10.10.4 OS

  51.14 Bootcamp & Windows 7

  I also have a surge protector and battery backup.

  It is the second time this has happened to me. I have Windows 7 installed on a partition on my hard drive. I primarily use Windows for work. I go back to my computer, after he went to sleep through the night and there is only a black screen with a blinking cursor.

  1 restart does not help. Windows starts to load and says "Windows Recovery" but then returns to the black screen and the blinking cursor.

  2 press and hold F8 does nothing.

  3. I installed a program of NTFS file and deleted the ATI drivers as another (old) suggested post. It did not set the issue.dd

  4. I restarted my key USB from Bootcamp/Windows 7, however, the keyboard and the mouse are dead when the Windows Setup screen appears.

  The Mac partition continues to operate correctly. Any help would be GREATLY appreciated. The first time that this has happened, I finally gave up and had to wipe the HD, reinstall Windows and all software. I lost at least a whole day of work because of this. I'd really, really prefer not to have to reformat again - especially because it seems that this could happen just once again. Is this a known issue with the display and Windows 7 drivers?

  Help, please!

  Thank you

  Dan

  1. do you have any active Windows automatic updates?

  2. There are a lot of issues with sleep/hibernation on W7. You have an active Windows system restore point?

  3. you have any software NTFS third side OSX or Windows, that allows read-write access to partitions?

• iMac (retina 5K, end of 2015) in 64 bit mode?

  How can I tell if my iMac (retina 5K, end of 2015) runs in 64-bit mode or not?

  10.11.6 OS

  Y at - it software that would let me set it to 64 or 32?

  Thank you.

  Mac

  All iMacs for years past were 64-bit, yours is. I believe that there is evidence in the application of the information system, but you will need to do some research.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• iMac stopped book content display

  My new iMac has ceased to display the contents of some directories. If I select 'Get Info' some files appear, but not all. A counter appears at the bottom right of the finder for the directory window. Listing of the directory of the Terminal application, shows all files. Restart the computer to make the problem goes away, but it comes back eventually. Directories concerned are all my files user as Documents, downloads, utilities etc., external drives seem OK.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  Reset the SMC.

  Barry

• Best blu - Ray reader/DVD burner drive for the 5 K 27 "iMac retina?

  Recommendations for best blu - Ray Burner DVD reader/writer that works best with the 5K 27 "iMac retina calculate.

  It is not 'better', but there are choices that meet your needs. Contact www.macsales.com (OWC), they sell many OS x ready Blu Ray players, one or more will fit your needs. Talk to someone, they can help steer you in the right direction.

• iMac (retina 5K, 27 inches, end of 2015) 1-2 second stops when you try to open or switch between applications

  1-2 second ago stops whenever I try to open an application or switching between applications. The animation of the application icon in the status bar at the opening of the starts, pauses for 1-2 seconds and ends before you open the application. When you click on an inactive application window it pauses for 1 to 2 seconds before making the active window. This only happens after a reboot. It takes about a day being initialized for this problem to occur.

  This does not seem like behaviour expected of such a new machine with charge card. All advice is appreciated.

  Here is my EtreCheck report:

  ***

  EtreCheck version: 2.9 (250)

  Report generated 2016-02-03 11:33:10

  Download EtreCheck from http://etrecheck.com

  Running time 01:31

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Computer is too slow

  Description:

  1-2 second ago stops whenever I try to open an application or switching between applications.

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2015)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac17, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  0/DIMM1 BANK

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM1

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  AMD Radeon R9 M395X - VRAM: 4096 MB

  iMac 5120 x 2880

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day

  Disc information: ⓘ

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  iMac (disk1) /: 999,33 (Go 652,85 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: ⓘ

  Broadcom Corp. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Western Digital my passport 071D 1 TB

  EFI (disk2s1) : 210 MB

  Boot OS X (disk2s3) : 134 MB

  Backup local (DIS3) Volumes/iMac/iMac local backup: 999,51 (Go 107,33 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk2s2 999.83 Go online

  Apple Inc. IPhone.

  Reader SuperDrive for MacBook Air Apple Inc..

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  /Library/LaunchAgents/com.support.com.PerUser.Nexusd.plist

  /Library/LaunchAgents/com.support.com.PerUser.Nexussrvd.plist

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]

  com [no charge]. Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]

  com [no charge]. RemoteControl.USBLAN.usbpart (2.0.6) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.netpart.Panther (1.6.1) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.usbpart.Panther (1.6.1) [Support]

  / System/Library/extensions/remotecontrol. USBLAN_usbpart.kext/contents/plugins

  com [no charge]. RemoteControl.USBLAN.panther (1.6.1) [Support]

  Launch system officers: ⓘ

  [loading] 148 tasks Apple

  [operation] 88 tasks Apple

  Launch system demons: ⓘ

  [loading] 191 tasks Apple

  [operation] 96 tasks Apple

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.CS5ServiceManager.plist [Support]

  [loading] com.support.com.peruser.Nexusd.plist [Support]

  [failure] com.support.com.peruser.Nexussrvd.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [operation] com.sonos.SonosLibraryServer.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure] com.adobe.ARM. [...]. plist [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [operation] com.backblaze.bzbmenu.plist [Support]

  [failure] com.google.GoogleContactSyncAgent.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  [operation] com.spotify.webhelper.plist [Support]

  [loading] com.valvesoftware.steamclean.plist [Support]

  [operation] net .infinite - labs.SIMBLEnablerForSandboxedApps.plist [Support]

  [operation] ws.agile.1PasswordAgent.plist [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Cinch Application (/ Applications/Cinch.app)

  Canon IJ Network Scanner Selector2 hidden Application (/ library/printers/Canon/IJScanner/utilities/Canon IJ Network scan Selector2.app)

  SizeUp Application (/ Applications/SizeUp.app)

  Dropbox application (/ Applications/Dropbox.app)

  The messages application (/ Applications/Messages.app)

  iTunes application (/ Applications/iTunes.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck

  [ongoing] com.getdropbox.dropbox.48992

  [ongoing] com.irradiatedsoftware.Cinch.151392

  [ongoing] com.irradiatedsoftware.SizeUp.12192

  [ongoing] jp.co.Canon.bj.scan.network.scannerselector2.90592

  jp.co.canon.bj.printer.app.MPNEX213.45792 [loading]

  [ongoing] JP.co.Canon.cijscannerregister.14112

  [ongoing] org.herf.Flux.49952

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: Version: 1.0.0.0 - 10.6 [Support] SDK AdobeAAMDetect

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  QuickTime Plugin: Version: unknown

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  Default browser: Version: 601 - SDK 10.11

  SharePointBrowserPlugin: Version: 14.5.8 - SDK 10.6 [Support]

  Unity Web Player: Version: UnityPlayer version 5.2.0f3 - 10.6 SDK [Support]

  Silverlight: Version: 5.1.41105.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: update of Java 7 55 check version

  User Plug-ins internet: ⓘ

  WebEx64: Version: 1.0 - SDK 10.5 [Support]

  Web of Google Earth plugin: Version: 7.1 [Support]

  Safari extensions: ⓘ

  1Password

  Add to the list of Amazon gift

  InvisibleHand

  Little time

  PIN button

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  iMac: disc size: 999,33 GB disc used: 346,49 GB

  Destinations:

  The iMac HD Gallagher family backup local [Local]

  Total size: 999,51 GB

  Total number of backups: 82

  An older backup: 27/05/15, 12:54 AM

  Last backup: 03/02/16, 10:34

  Backup disk size: too small

  Backup size 999,51 GB< (disk="" used="" 346.49="" gb="" x="">

  Top of page process CPU: ⓘ

  140% nsurlsessiond (2)

  85% launchservicesd

  78% photolibraryd

  11% cloudphotosd

  9% com.apple.photomodel

  Top of page process of memory: ⓘ

  1.70 GB kernel_task

  1.12 GB launchservicesd

  1.12 GB cloudd

  Softwareupdated 492 MB

  Photolibraryd 229 MB

  Virtual memory information: ⓘ

  6.39 GB of free RAM

  26,00 used GB RAM (18,35 GB being cached)

  8 MB Swap used

  Diagnostic information: ⓘ

  3 February 2016, 11:31:58 /Library/Logs/DiagnosticReports/launchservicesd_2016-02-03-113158_[redacted].cp u_resource.diag [details]

  / System/Library/CoreServices/launchservicesd

  3 February 2016, 11:30:22 ~/Library/Logs/DiagnosticReports/iTunes_2016-02-03-113022_[redacted].crash

  com.apple.iTunes - /Applications/iTunes.app/Contents/MacOS/iTunes

  3 February 2016, 08:18:45 /Library/Logs/DiagnosticReports/nsurlsessiond_2016-02-03-081845_[redacted].cpu_ resource.diag [details]

  / usr/libexec/nsurlsessiond

  1 February 2016, 19:53:04 self-test - spent

  Hello Agent37,

  What are your settings of Photos? Looks like you have a ton of photos regenerate and transferring to iCloud. I've seen similar reports, but I'm not a heavy user of Photos. I'll see if I can move your question on the forum Photos: Photos for Mac

• Is iMac without retina k 4 at 2.8 GHz with more quickly than the iMac retina 4 k with 3.1 GHz?

  Is iMac without retina k 4 at 2.8 GHz with more quickly than the iMac retina 4 k with 3.1 GHz?

  In most cases you won't see much difference in performance using CPUs unless you do very intensive CPU.

  Maybe you can tell what your needs are for the computer, what you intend to use applications and then we can help suggest some configurations, you might want.

  In today's computers, which makes the greatest performance increases for typical users are (in this order):

  • SSD instead of a Fusion or rotation HD.
  • RAM
  • GPU
  • CENTRAL PROCESSING UNIT

• I have 6 s phone is not connected to the iMac (retina 5K, 27 inches, end of 2014) using bluetooth

  Hi every time I try to connect my i phone 6s with iMac (retina 5K, 27 inches, end of 2014) performances

  connection failure ' jatin iMac is not supported.

  Pls help its strange

  Connect an iPhone to a computer is not supported.  Has never been.

  Bluetooth: Why can't connect my iPhone or iPad with another iOS device or my computer?

• 21 2015 imac, retina

  Received a maxed out 2015 iMac, retina.  3.3 GHZ quad i7, 16 GB 1867 MHZ LPDDR3 memory,

  2 TB Fusion, Apple Care drive

  An early CHRISTMAS gift.  Use it for Photo retouching.  Have an external hard drive 2 TB for a work with USB 3 drive. Very happy with the results.

  The HD 5400 speed reader and the graphics card is integrated 6200 Pro of the Iris.

  Would this run Final Cut Pro X and Adobe After Effects you can waive them too slowly?  Slowly as in plenty of time to wait between the actions.

  10, 20, 30 seconds or more, depending on what you are doing.

  Not a necessity for me to have either. Just thought it might be something else to make videos of 10 to 20 minutes.

  Not on this site much so thanks a lot in advance for the answers.

  No, this is not normal.

  What type of media you work?

  Where is your support stored?

  Boot mode safe. After that you have passed the restart of the login screen.

  If it is still lagging behind, run this program and see if it reports anything. Post the report as well as others can take a look.

  Russ

• I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  You are 100% sure that you are clicking to download the Mac version and not the version of Windows?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• I tried to install Adobe Creative Suite 5.5 on MAC OS 10.10.3 (iMac, retina). All this work well except Acrobat Pro! I always get the message: Exit Code 6 fTl - error (s) 2 (s) WARNING (s)

  I'm working on a new iMac, retina 4 GHz with system 10.10.3

  When I reinstall Adobe Creative Suite 5.5, I get a problem with Acrobat Pro! Complete installation works well except Acrobat Pro. I get the following message:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s), 0 warning (s)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Acrobat Professional: installation failed

  -------------------------------------------------------------------------------------

  Dose anyone have a solution?

  Hi Daniel,.

  You can consult the following document and follow the steps mentioned and see if that solves the problem for you.

  The document is on the Exit Code 6 and 7 of the Exit Code for CS5 and CS5.5.

  Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CS5, CS5.5

  Let us know how it goes. Please come back if this does not solve your problem.

  Concerning

  Sukrit diallo