PSE action does not

Similar Questions

• Keyboard shortcuts AND Actions does not

  Keyboard shortcuts 1 keys do not work (e, g.  "P" to scroll pen options, 'B' to scroll through brush options, etc...)

  The CNTL + and ALT + seems to work fine. In addition, when I hit 'P' or 'B' selects this option, it does not work through them (brush pencil to the replacement of the color to the mixer).

  I completely uninstalled PS especially remove any previous presets (that sucked) and re-installed Photoshop since I discovered it.

  In addition, actions does not correctly or the other. I have a copyright of metadata carried out screening. I had an action implemented to always update to preset on new or open documents. Given that I have re-installed PS, this script no longer works. I made a new model of metadata from 2016, has recorded a new action and implement the handler for scripts to run on the new and open. However, whenever it is running, the script that I have saved always reverts to "Feature of models" instead of pre-recorded format that is available.

  When I type 'P' or 'B', it selects this option, but does not work through them (brush pencil to the replacement of the color to the mixer).

  Go to edit-> preferences-> tools, "If you're on previous versions": Edit-> preferences-> General

  then Unckeck 'Key Shift tool Switch use'

  

• Shared action does not of course 7 to 9

  All,

  Is there any known issued with not shared actions convert Captivate 7 to 9?

  I'd build one to replay a slide from the start, but now that we've updated the action does not work... and I can not understand how to open it to see what I did in the first place.

  Help with this dilemma would be appreciated.

  v/r

  Jay

  Joint actions have been improved in CP8 compared to CP7, because the variables and literals have been added as parameters. This could be the cause of your problems.

  Recently, I explained two scenarios for slides of Replay, maybe this can help: BACK (slide) - Captivate blog button

• "set the restart target action" does not work, why?

  There is an element of "set the restart target action" in the SDF file. I put it to "run a system definition.

  

  But it does not work. I don't know why. It seems that when the project is canceled, the SystemDefinitionData.nivscfg file is deleted.

  

  Cancel the deployment of will stop the configuration and mark idle.

  If you restart the RT target by HW button or through the channel "System of command channels", while the configuration is active, it will start the Setup again after the reboot.

  Jiri K.

• Tip action DOES not work in the Flash output

  Hello

  I created a module in line with Captivate 9 using an advanced conditional action to display the button at the end of 2 sections.

  The trigger works well in the release of HTML5, but it does not work in the Flash output: users need to go back to the slide with the action advanced a second time in order to show the next button.

  It is the created tip action:

  

  Help, please. Thank you

  Lisa

  Change the order in the updated standard measure jump to slide as last order, or at least after the command of the increment.  The actions are executed in sequence, if you jump first to this slide, where the on enter event is executed, the variable has not yet been incremented. Try to see if it solves the problem. HTML is different from SWF to react (it is converted to JS so that SWF to ACE).

  You post the screenshot of the timeline.

  Moreover, as I have indicated already, I would add continue to the part of the TIME as well as the ELSE part. I learned that, in certain circumstances, a conditional action with that one decision, and no ELSE part does not work well. It is not a problem if you have several decisions.

• report interactive apex 5, pivot action does not display columns in the application developed on 4.2.6

  I just installed apex 5.01 on apex 4.2.6.

  When I want to use the pivot of the action on an interactive report developed on 4.2.6 the names of the columns does not appear.

  If I add a new column, it seems

  calculated columns displayed

  Thank you

  Hello

  The pivot must be enabled for these columns.  To do this, you can upgrade the application developed in 4.2.6 as follows:

  -Click on the application

  -Click utilities

  -Click on the Application upgrade

  -Activate the IR Pivot should appear.  Click on the number of candidate object

  -You can select some or all of the IRs to upgrade

  Kind regards

  Christina

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• Advanced Scripts of Action does not not in the advanced Actions window

  I have no idea how or why it happened, but on some scripts that I applied to some buttons, when I click on the folder icon to open the script in the advance action window, the script does not load. It shows just blank like this (screenshot below). If I try to select it from the dropdown of existing shares, it does not load. If I try to make a new script again, it will work initially, but the same thing happens if I try to open it again. No idea how to solve this problem?

  

  It looks like the corruption of the file. You're careful with naming of decisions and measures? Never use a name that has already been used for another object.

  If you copy an interactive object in a new project, the action in the annex is copied (at least if you're on CP8 or 9).  Normally slides copy and paste in a new project could help, only bit worried on the copy with the actions.

  Have you already restarted Captivate and maybe your system as well? Worth a try.

• Dynamic action does not not on the first attempt to load page. Work after refreshing the page

  4.2.1

  Hello

  I have a page with a list of selection Order_id and a display _item Product_name.  There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time, if I change the select order_id list, nothing happens. But if I refresh the page once, and then it starts work and the display_item is filled.

  No idea what could be the problem?

  Thank you

  Ryan

  ryansun wrote:

  On a more serious note,.

  1 when you load the page for the first time and try selecting the order_id, nothing don't be past, try refreshing the page once and you will see the option to display with the null value. What I do is. I have two tables

  Orders

  1

  2

  3

  Products

  1A

  2B

  2 Z

  3 C

  When I select the command 1, then since there is only one line of products, the displayed item will indicate A populous. If I select 2, since there are two product lines, I should see the list box.

  Doesn't seem to work and I'm sure, I'm doing something wrong.

  Difficult to be certain that as it appears that someone has been editing the page before you start watching (rather than copy the page experience their own copy). Your article P1_PRODUCT_NAME_DISPLAY he a point value / Expression 1 column = Expression 2 condition P1_HIDE_SHOW = 1 condition on that? Or any other condition of rendering?

  These conditions do not match the dynamic actions. They are applied only during the page see the transformation when the page is displayed first; When it is linked to another page; or after a branch to him. They are not applied dynamically during the activity of the user on the page. In this case, that the status is set to false when the page is rendered first, the same element does not exist in the page sent to the browser. If you want these items to appear conditionally because of the interaction with another user control, then you must initially return the elements and control their visibility using hide/show the dynamic actions.

• PSE 14 does not refresh to ACR 9.5

  I am the PSE 14, under Windows 7 64-bit.   The cab is at the 9.4.0.548 level.   When I try to update via help-> updates,... He tells me that everything is completely up to date.

  I contacted Adobe support and did not have a great experience.   There is no support for PSE phone, so I opened a chat.  Once I explained the issue in detail, the person on the cat asked me to 'go to forums.adobe.com to find a link.   I asked: what link?  You can give me just the URL?   They said no.  Well, I went on the forum and found previous answers which indicated that 14 PSE should be updated to ACR 9.5 through the help-> updates.   That's exactly what does not work for me.   So, I reiterated that even once on the cat, but was ignored.  The person never returned to help me.

  So, can anyone help?

  If not... the directions on how to get more thoughtful support on this?

  My PSE14.1 is updated to 9.5 from ACR.  I don't remember how it happened is for a month or more.  If Help / updates does not work and run the installer on the download link doesn't work, then try to extract the file-plug-in Camera Raw.8bi directly from the EXE installer.  You will need 7 - zip to do.  After installing 7 - Zip, right-click on the CameraRaw_9_5.exe and select 7-Zip archives / Open.  Click the bottom after the COMMONFILES64 folder until you see a Camera Raw.8bi file.  Click Copy To Folder that somewhere.

  

  Once you have the 64-bit Camera Raw.8bi copy/paste in the folder of files for PSE14 Formats, after renaming the plug-in with an extension of .old94 in place in case this new does not work and you must rename back the 94 version.  You should end up with something like this:

  

  I'm on Windows 10 and tested and it works; However, since I was rename and copy things in a folder under Program Files, I got a popup of security I had to recognize that a user is not General ' don't mess with things in Program Files.  Your Windows 7 may be less picky.

• LR export action does not open multiple files

  I've updated to the latest Lightroom (2015.5) and Photoshop CC (2015.1.2) this morning which was a bad idea! My action of export on several raw files open only one file at a time in Photoshop!

  I recreated the droplet and tried again. It does not work.

  I can export multiple files without shares of export and that works.

  Help! It's very annoying and slow down in my work!

  It's already there: roplets https://feedback.photoshop.com/photoshop_family/topics/lightroom-6-4-export-problem-with-d? question-answer-list % 5Bsettings %5D % 5Bfilter_by %5D = all

• Confirm the dynamic action does not not as expected in the APEX 4.2.5

  This looks like a bug in APEX 4.2.5.  I have a page with a "Cancel" button that redirects to another page.  There is a dynamic action that fires on the button with a confirmation action and the text ' are you sure?  However, if the user selects OK or cancel in the confirmation dialog box makes no difference - the redirect is always performed.

  I found this question after the migration of a page that worked to 4.1.1-to-4.2.5.00.88 APEX and were also able to replicate on apex.oracle.com here:

  https://Apex.Oracle.com/pls/Apex/f?p=19896:2

  (Press the Cancel button in the top right of the page redirects to page 1, regardless of the user's response to confirm the popup.)

  I don't need someone to suggest the alternative code, I know how to build my own confirmation processing.  I want to just raise this as a bug as possible and see if there is a solution to make the dynamic action works as it should.

  NB I found this in the patch notes for 4.2.5.00.88 on a fix for a similar problem:

  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-425-patch-set-notes-2186274.html

  15984978

  Dynamic action front-Submit with a confirmation message does not

  Hi Tony,.

  I think the problem is that the action of the button is defined as 'Redirect page in this Application', but it must always be "defined by the dynamic Action" as soon as you have set dynamic actions 'click' to a button. Normally, which is automatically changed as soon as you create your first dynamic action of a button, and I just confirmed by creating a test button in your application that has been defined as «Redirect...» ». After that I created a dynamic action the action of the button is set to "defined by the dynamic Action.

  Is it possible that you have modified the action of the back button to «Reorient...» » ? The question why «redirect...» "does not work, it's that we cannot guarantee in what order the browser will process click on events defined with onclick in the tag button itself and those events attached as a click event handlers. This is why it is necessary that everything is defined as dynamic actions. Only in this case you will be able to cancel the treatment.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

  Post edited by: Patrick Wolf

• Tip action does not work when I add a second block of decision

  I'm writing an advanced action 8 Captivate. In response to a question about the points, the user types a number in a text entry area. When they support, the fast action will assess the number. If it is 10, the program should jump to a slide that shows that 10 is the right answer. (When I do just that in a single block of decision, it works.)

  However, the full tip action must assess if the value is higher or lower than 10, then return the user to the question slide and displays an appropriate message. When I add the part in a second decision block, advanced action performs as expected if an incorrect value is entered, but does not work if the correct value is entered. It does is display the question slide once again.

  Here is the code:

  

  Any ideas on what I am doing wrong? Should there be an ELSE statement in the first block of decision? I tried to continue, but that did not help.

  -Stuart

  The logic of your advanced action is not correct. All decisions are always evaluated. What is happening here is the following:

  1. First decision check if var is equal to 10; If this is the case, it will change to slide 2
  2. Second decision check if var is greater than 10, if it is accurate, it will move on to slide 1. I guess the capPoints1High is ON slide 1?
  3. BUT here's the logic bug: If If is not greater than 10, which is also the case when it is equal to 10, it will change to slide 1, although already, he jumped to slide 2 first with the first decisioin

  Two possible solutions:

  1. decision of the switch 1 and 2 (one easier)
  2. remove the ELSE part of decision 2 and create a decision 3 to check if var is less than 10

• I am trying to reinstall Flash CS4 professional as the script action does not work, but now I get an error: 2 message when I use the original CD to reinstall

  I can't get the original disc work on resettlement.  I get the message

  AdobeColorCommonSetRGB

  Error:

  Error 2.

  I'm teaching a class using this program on Macintoshes running 10.9.5 and action script does not work.  It will work on any program designed by using the 10.8, but if you create an animation on 10.9.5 the action script will not work for buttons

  You must manually remove the color in question profiles... Run the cleanup tool and see if it's to help you get started.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• Game audio action does not work in Captivate 7

  Hello

  On the first slide in my class, I added a "quick start" guide It consists of a series of legends that contains text. In each legend, there is a text link "Continue" triggering a tip action to hide the current legend / show the following. This works perfectly.

  Now, I tried to reach audio at each step of the guide. I added a "audio playback" action after stocks show/hide for the first step. No audio not playing. When I changed the audio of the game to be the first action in the script - the script did not work at all. When I changed it between the show and the skin, leather working and show does not. What I gather from this is that play the audio does not work and also stops all this.

  Any advice?

  Thank you

  Just checked, created an action shared with almost exactly the same commands, but grouped together all the containers in text in a group Gr_TC

  Hide:

  

  It worked perfectly. You don't see a label, because it is a common action, to which I just filled in some settings. Attached to three buttons, had 3 containers of text and 3 different audio clips.

  The audio clip plays when it is used in another way? The only difference seems to be that you have a clip of VO and I used one of the sounds included with Captivate.

  Another way would be to fix the audio on the text as audio of the object container. Once you view the text, audio will play, when you hide the text to stop. It was the way to go before COP6:

  http://blog.lilybiri.com/playtime-with-audio-and-widgets

  Lilybiri