PST problem, stability, etc. (modern!)

Similar Questions

• problems starting etc.

  Hello

  A few days ago my computer overheated and crashed. I thought nothing of it, because I knew a crash before and my computer started fine, after that happened. However, this time was different. It seems that I am able to navigate any menu in the start of my cmputer is not serious. Finally, every option I click on, all menus I followed, leads to the same black screen with a mobile cursor. I see messages on the screen that the problems with "3fo.

  I made a boot disk that seemed to work at first until what I finally got the black screen of death. I checked the hard drive to make sure that nothing was loose and tried to gently get rid of any dust that had got into the inner workings of my laptop. None of my files are backed up, and I don't want to take the chance to do a hard reset and then unable to recover them.  My main problem is this black screen. I think that if I could pass just Hat I would be able to restore my computer to an earlier date.

  It is not a safe mode without a hard disk and is probably the BIOS/diagnosis. This tells me that the hard drive is toast and blocking the computer to display normally. Then of course, you know how to get on the hard drive.

  Here is the service manual for your model:

  Manual

  Your laptop came with a 640 GB 5400 RPM drive. You could install an SSD and run much faster, but that ones. I suggest at least 750 gig-1 TB 7200 RPM model like this:

  http://www.Newegg.com/product/product.aspx?item=9SIA29P1N07579

  I'll go out on a limb and say that it is Windows 7 Home Premium 64-bit, since it is what came on it from the factory. You will need your key Code from the bottom of the laptop or inside the battery compartment. You can download a Windows 7 Home Premum 64 bit here disk .iso image:

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO

  This is a download to 3.3 gig so takes awhile and you cannot just burn the file downloaded on a disk. It takes software .iso that is free to download and use creative. After the back if you need assistance here. This disk and your key Code and the drivers of this site we can get you running on a new hard drive clean.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ADF PST PROBLEM

  Can someone tell me after you download jdeveloper 11g lib dvt jsf 2.0 updates that by default because it dvt jsf 1.0 because of who I am unable to see the graph in the menu
  
  I download the latest version 11.1.2 and I want to spend dvt library in jdeveloper, because I am unable to see dvt adf plate component (such as graphics, gaughes etc...)

  As mentioned in other post, make sure that the ADF DVT libraries are added to the library project node (doble click on the project node to open the properties of the project). There is nothing you need to do in terms of upgrading

  Frank

• Is it better to keep opening new tabs in the same browser session or is there a point where open another browser session (instance) is 'better' (performance, resources system, stability, etc.)?

  It is a general question about how best to work with many open web sites. Sometimes I open 10-20 at the same time. Sometimes I will open a second or a third copy of the browser and have several tabs there too.

  Some other browsers use a separate process for each window that opens, Firefox is not. It doesn't matter how many windows you have open in Firefox, that you use a "session" or process of Firefox.

  The only exception to this is with Firefox 3.6.4 & versions of plugins is running in a separate process "plugin - container.exe".

• Updating BIOS for Acer Aspire 3000 / battery problems

  So I had a couple of Acer Aspire 3000 who were not working and got one to work...

  But it seems that I am having some problems when the battery is in it - and otherwise fine without him.
  Excessively long Shut Downs that go to the continuous reboots / Touchpad problems, gel, etc.

  Says the battery until it goes to @ 7-8%.  Then the battery does not charge.

  When the power adapter is disconnected - the battery is charge?

  Given that these laptops have been sitting around for a couple / few years... and have been given to me... I do not deny the possibility that the battery is not good. And there was only 1 battery using 2 laptops.

  After that she has charged at 7-8% - I unplugged it the adapter - and it ran for @ 20 min.  and said: '1 HR 30 min remaining"until she was cut.

  I also tried tried the - remove battery unplug adapter and hold the power button for 2 min method - then installed battery and adapter - but nothing helped...

  (On a side - note, which is probably not related - my wifi doesn't seem to be working - even though it appears, it does nothing wrong in. Device Manager - and runs a diagnosis does not help...) I know there are wireless networks but none does not appear! Broadcom 802. 11 g)

  In any case - I saw a post on a different site-say an UPDATE of the BIOS could possibly solve the problem of battery - (wifi may be too)...

  Given that I've NEVER DONE an UPDATE to BIOS; I'll ask NICELY, please walk me but this... with as little as ACKRONYNS and GEEK TALK as Possible (respectfully).  I had heard of this sort of thing - to download the update of the Bios... and I think it can be put on a Falsh player - but is a ZIP and should she be EXTACTED - which I'm not too big? Then "Select (something)? and then maybe restart... So now, I'm willing to give it a try - with some help and input.  THANKING YOU IN ADVANCE!  a link for the download and the proper BIOS UPDATE would be a big departure... - I guesss that goes without saying.

  So, here are some features of the information system: (I hope there enough, but please let me know if you need more)

  

  3 to 32 of the latest BIOS availabel

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_3A32.zip?acerid=633643243476341057&STEP1=note...

  for flash, unzip the file and then read the statement in the WinPhlash SOP XP 2005.pdf file update.

• IP address problem

  Hello again,

  Hello again,

  Well, I could put everything up with linksys tech people but unfortunately I am not able to connect to the outside of my home monitoring system. I subscribed to TZO.COM and used their support troubleshooting to solve my problem, PortDetective, etc. and still no success. My cousin geek could not connect to my router or my camera. Starts seems based on its expertise, my ISP Embarq (dsl), now called Qwest is the problem. He said that the ability of tzo.com to update my IP address is not enough if my ISP has a permanent block on my IP address. If this is true, it will be an additional charge of $10 / month... is there another option for me?

  Thank you

  It won't change any settings on the router and it will continue the work... It's good to hear that your problem has been set now... Enjoy

• WRT310N - Port forwarding problems.

  Problem is that it doesn't.

  I have a series of 600 Zyzel DSL Modem/Router in passthrough mode.  Everything works well.   PC on the network have no problem out etc... but I have several webcams wireless I can't access from the internet.  LAN has no problem.  I've set up port forwarding and nothing.   I can't access anything whatsoever for that set up the transfer.  I've updated the firmware, I toggle etc etc and nothing seems to work.   I'll guess it's maybe something with the pull-out decision, but that's just a guess... gut feeling.  I had an older router on the network before but got this new, but he wasn't in passthrough mode, I just used it as an access point for the wireless.    I guess that I couldn't take off passthrough and test, but not at home so I can't do it right now.

  Anyone aware of issues like this?   Does not much feel... all eyes right configuration.

  And he who responds, you can talk shop, I'm a blade L3 technician and an engineer of SAN...  That is, I know my way around computers and networks.

  Figured it out... ID10T...   Problem was, indeed, the devices themselves.   Because of the way I had the network installation before that all wireless devices had the wrong IP to the new access point.  Once I fixed that the transmission was successful.

  In addition, I kept the DDWRT firmware, it's so much better than the version of Linksys, it's not even funny.  (Wonder if they delete this because of me saying that...) I had problems of resistance low signal 30 feet away from the other side of the House... questions to xbox 360 streaming.  Once I have updated the DDWRT firmware the intensity of the signal went to full and streaming on the 360 problems disappeared.

• Jump list problems: unpin / disassembly do not work in double entries, appear entered PIN change

  I run Windows 7 Ultimate (new installation) of an SSD. Most of the document files are stored on a network drive.

  At the beginning I was very excited about the new jump lists, but after a few days I started to notice problems:

  • duplicate of some files on my player entries network appears in the section of "Many" of the Windows Explorer jump list
  • This is the case only for items on the network drive
  • only some of the duplicates can be removed, others persist
  • pinning of items from the network drive to the Explorer jump list Windows seems not to accept only one item; elements subsequently added simply to replace one who was pinned in front of them
  • pinning items from the main system drive is functioning normally (the item will be added without moving the previous items)
  • After pinning on a specific folder on the network drive in the Windows Explorer jump list, he spontaneously changed in another folder (a subfolder of the first that I recently created and worked with). This repeated behavior after that I have this marking the file and I tried to re - locate the right pair

  The problems seem to be centered on the use of the network drive. My home network is built around a router that distributes dynamic IP addresses, the network drive may not always use the same IP address. Also, I keep the 24/7 network drive, so both the computer has no access to it. No doubt this confuses Windows somehow, but I really think that it should not be a problem for a modern operating system.

  Hello

  Fix for when pinned jump list items get stuck in Windows 7
  http://www.howtogeek.com/HOWTO/5245/fix-for-when-pinned-jump-list-items-get-stuck-in-Windows-7/

  I hope that helps!

• Satellite Pro A300 - upgrade RAM of the former model A200

  Hello

  I need an advice. I just took a memory (Samsung) 1 GB of more old model Satellite A200 module and put it on my new model Satellite Pro A300. Here is the information about the SPD:

  _Original (which has been installed in the factory): _

  DIMM1: Kingston (2 GB DDR2-667 DDR2 SDRAM)
  Manufacture Date week 20 / 2009
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-26-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  _From old Toshiba Satellite A200: _

  DIMM3: Samsung M4 70T2953EZ3-CE6
  Manufacture Date week 42 / 2007
  @ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-35-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
  @ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-28-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)
  @ 200 MHz 3-3-3-9 (CL-RCD-RP-RAS) / 12-21-2-3-2-2 (RC-RFC-RRD-WR-WTR-RTP)

  According to the information provided was it a good or bad idea? I mean differences in the SPD and will this performance, stability, etc. ?

  Thanks a lot for your time!

  Hi xosman,

  According to the information that you have posted it seems that the other Satellite A200 module has the same specifications, so if your laptop works with this module it s no problem I think.

  Satellite A200 A300 using the same memory modules DDR2 so change the RAM is no problem.

• X 3000 - all cookies blocked!

  Hello

  Purchase new modem/router 3000 X 2 days ago and I am happy with the speed of connection and stability, etc. and it was very quick to put up with my BT Business Broadband. BUT all the cookies seem to be blocked. This is demonstrated, for example, when you try to use online stores (the "shopping cart" feature does not work) and other online services that depend on cookies when you use the site do not work either (another example is the national rail investigations site which expires as soon as you click on 'search' in the trip planner!).

  So, I checked:

  The router config and the box to block cookies is not checked in the Security page (I haven't touched the tip so it should be all about the default settings).

  My (s) browser - Opera, Firefox, Chrome and IE all show the same question and are ready to allow all cookies.

  All of my devices - laptop with Windows 7 (Pro), with Windows 8 (Pro), Samsung Galaxy Tab 2 (ICS), Blackberry Bold, Blackberry Playbook, Windows Phone & iPod all have the same problem when it is connected to the X 3000.

  Now, if I connect to my (very) old Linksys WAG200G, without changing the settings on my PC (s), everything is OK...

  All this seems very strange and I'm about to return it to the store for a refund - thought I would here, check everything first well to see if anyone had ideas!

  See you soon

  Hi Jezmondo,

  Fristly, sorry for my English... I have your same problem after firmware update (version 1.0.0.4), you can fix the problem with a simple configuration setting, go to your x 3000 page(default http://192.168.1.1), on the Security section, under the filter web, you check the box cookie, save your change, waiting for the page refresh and enjoy! Test the web site with cookie control, web e-mail, e-commerce, facebook ect.

  I'm waiting for your comments.

  Good luck

  Andrea

  PS

  I think the problem is small bug in the firmware update procedure... tonight I try factory reset.

• PP CS6 will not open PP CS5.5 project on Mac Pro

  It goes like this:

  After having installed the suite Production Premium CS6 to replace my suite Production Premium CS5.5...

  I open PP CS6...

  The start screen for the new project/Open Project / Help appears...

  Select "open a project"...

  Choose my existing project...

  He said that it must be saved in a new file CS6...

  I give it a new name of file...

  He tells me that he doesn't have some 3rd party filters in the new...

  I click OK...

  He asks me to locate some missing plans...

  I click on "Skip All"...

  He opens my project; I see the chronology, etc...

  It auto-enregistre the new project is the opening...

  No matter what I do next, cancel the registration, it allow to save, the timeline, and then disappears...

  The computer barattes for awhile...

  The start screen for the new project/Open Project / Help appears again...

  It turns out to have not created a new project of CS6, so...

  Again, with the same results...

  This can last all day.

  I'm on a 2007 (then high-end) Mac Pro with 2 x 3 GHz Quad - Core Intel Xeon processor, Quadro 4000 card and 16 GB of RAM running Mac OS X 10.7.4

  I'll try-exporter and importer FCP XML but worry about losing some aspects of the project to export/import unnecessary.  This is a huge feature film project.  Since it should not do the above it makes me nervous also about stability, etc. of the book.

  Any thoughts would be appreciated.  Could not find this problem in existing wires, I apologize if I missed it somewhere.

  Thank you.

  Richard

  Typical troubleshooting first attempt for this kind of scenario: create a new project of CS6 & use the Import Project command to put in your draft 5.5 in.  Let us know if that fixes for you.

  See you soon

• SuperDrive drive broken don't Boot Camp Windows at El Capitan

  I tried many schemes proposed in this forum and at least a dozen different ways to do El Capitan boot camp Windows. I have run csrutil disable recovery and used the utility gdisk to rewrite the workout plan to use GPT.  It seems to go as far as the installation of all files of Windows 10 then I get the message Windows "Windows didn't prepare the computer to start the next phase of the installation.» To install Windows, restart the installation. "I tried bcdboot c:\windows and manually enter the drive and also the partition GUID I recorded option detail gdisk. But I get errors co so there is something that has always does not run.

  I have not yet tried Rufus. I used unetbootin to make my Windows 10 microsoft 64-bit ISO flash player. I also have an OEM Windows 8 disc bought three years ago. I am a little concerned by the barking of multiple trees simultaneously.

  It's a MacBookPro6, 1 EFI and SMC confirm current. 8 GB Crucial RAM. The SuperDrive doesn't work, or my burner USB Pioneer BD-204 (with confirmation last firmware, which actually turns into a BD-205) will allow you to install windows despite offering an optical EFI partition after the option - reboot. I was able to get Windows installed from a USB key that I did leave an ISO download unetbootin Using Microsoft as described. Maybe Rufus has solved this problem?

  I am entirely prepared to scrub the entire disk (that I had actually done yesterday, by a genius) and start from scratch if I could just find a step - who would work in reality. I really need to boot camp Windows 8 or 10 of this machine again.

  I'm even ready to install another internal drive instead the SuperDrive for boot camp Windows, but I want to assure you that I have does not work in the same exact questions if I take this step.

  Also boot camp just offers me the possibility to specify an ISO standard, there isn't that two not three check boxes and whenever I try from the disk, I get the black 'system unboot press a button' block after it restarts.

  I also edited info.plist of boot camp to add my model to the list of the 32 bit patterns.

  There is absolutely no problem backup etc., yesterday, the genius was so smart that he told me to try a Microsoft store.

  Please help this is going on 10 days, that I tried to fix this now. Should I go back to the Apple Store and ask them to put the Mavericks on this? That's how I got 8.1 Windows boot planted three years ago.

  Have you looked at this - http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... ?

  Do not install a second Optibay drive, until Windows is completely installed, otherwise you will encounter more questions.

• New version of Java 7 udpate 40 download on firefox

  I can't download Java 7 update 40 on firefox (or IE).
  I tried everything suggested in the forum here and get the same message:

  "The connection was reset while the page loading..."

  (All my other pages/research charge very well).

  It seems to have started when my pc did an automatic update of Windows 9, when nothing else worked, I therefore uninstalled Windows 9 and am now under Windows 8, but Java still doesn't work do not.
  I uninstalled the old version of Java in my programs.
  including all the 'toolkits' etc. You don't know if it was the right idea, but now...
  I checked activate java in all the internet options boxes etc as said on the forums.

  My Windows Vista is running on 32-bit operating system - has always...
  Could be the problem? The new update of Java 7 is 64-bit?
  However, when I try and follow the instructions on the Java site to download for 32-bit.
  I get the same problem and the same standard page showing me there was a problem connecting etc...

  I don't know if it's a problem of Firefox or an IE one? It will not download on IE... and I checked all the boxes it etc, tried to disable the firewall etc...

  I see on the Firefox plug-ins, called tookkit of java is disabled due to security and I can't change this setting... that is the problem?
  I just, laymans pc notions... can.; "t make things complicated, but is it something simple, I have wrong here or is this a fault of well-known firefox... with this Java?
  If that's what should I do next?

  Thanks v more
  Rhian

  I had the same problem on Saturday, Oct. 12, and Sunday, Oct. 13. However, I was able to download and install update 40 this morning (Monday, 14 October) successfully. It must have been a problem with the Java download site as there is problem in Firefox and IE, and it seems to be fixed now.

• Energy star office 101-303 na support assistant where will I find?

  Hi all

  I just bought the computer above. My last Office H P had a H P support help ants sitting in the bar waiting to be clicked open tasks. Here, there are different functions for things like automatic updates, fixing problem, support etc.

  My problem is that I can't find it on my new desktop computer.

  I am running windows 8.1. I have very little knowledge of computers.

  Thank you in advance.

  Frank

  If you see HP Support Assistant of uninstalling programs from the Control Panel, uninstall and reinstall from the site:

  http://h18021.www1.HP.com/helpandsupport/HP-self-support.html

  I strongly suggest that you do not use HPSA.  It has been problematic and does not work well with some systems of Windows 8/8.1.  There has been cases where he did some unusable computers because of suggestions of bad update etc.

• Portege R600 - what someone has installed OS FreeBSD

  Hello

  Someone trying to install freebsd on portege r600? BSD recognizes material etc...?
  All the problems? etc...

  Any experience and responses will be appricieated.

  Thank you.

  Hello

  Unfortunately I m not a R600 owner but in my opinion it shouldn't be a problem with the installation the most common devices should be recognized

  But of course you will not be able to install Toshiba special tools and utilities that are designed specifically for the Windows operating system.

  See you soon