Psvilion 15 t n200: network adapter driver is not found after Sys restored Image

In order to do a "Quick & clean" upgrade of a dv6 to 15 t, I restored an Image of my Dv6 to 15 t system.   Windows 7 installs and recognizes the cpu and RAM, but does not recognize the new drive size or especially the network card.    No driver available for ethernet or network or usb 3.0 controllers.   I downloaded and installed via external HARD drive all the graphics and network of the technical support site HP.com drivers.

Still no LAN or Wireless connectivity.

Was my Quick & clean strategy a great idea that doean can't just work technically?

Thank you

You are the very welcome.

Since this is a forum for peer to peer and I am not employed by, nor do I represent HP, I wouldn't be able to answer your question about why they have not all the right drivers on a special support page.

For your model, it seems that it is not supported by HP for W7 64 bit, since there is a very incomplete set of the drivers listed.

If you use HDMI output or mirror of the screen of your PC, the windows update driver wrecks installed its hdmi output.

I have the same graphics card than yours, and I leave the same windows update install the new driver.

When I the screen mirrored by PC for my smart TV, the sound was all choppy after this update.

I installed this new driver from Intel which also includes HDMI audio driver, and that fixed the problem of jerky noise.

The first file listed is the automatic installation file.

https://Downloadcenter.Intel.com/download/24870/Intel-IRIS-and-HD-graphics-driver-for-Windows-7-8-8-1-64-bit

I suggest that to start a new post on the docking station.  I don't have any experience with those who and how to use the disk management tool.

This link may be useful with the disk management tool.

http://www.MakeUseOf.com/tag/shrink-extend-volumes-partitions-Windows-7/

Tags: Notebooks

Similar Questions

  • Network adapter driver does not work with the recovery discs provided by hp

    Hello

    My wireless light does not illuminate. The network adapter driver does not install from the recovery of the driver CD.

    Here is the hardware ID. Please provide a link to the drivers:

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

    PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C

    PCI\VEN_10EC & DEV_8176 & CC_028000

    PCI\VEN_10EC & DEV_8176 & CC_0280

    Thank you

    You are the very welcome.

    It does not sound like a heat problem.

    I don't know a lot about the repair of hardware issues beyond replacement memory and hard drives.

    I could try to clean the area of fan/radiator with a can of compressed air and see if that clears any dust that may accumulate.

    To do this, disconnect the laptop from the AC adapter and remove the battery.

    Insert a rod through the air fan to keep the blades turning when you spray air.

    Spray through the air intake fan and watch to see the dust out of the exhaust.

    Repeat once or twice and blow air from the other direction of the drain line to the fan.

    The other driver, you need is the driver of protection Protectsmart hard.

    See if it works.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

  • Primary drive 1 not found after reinstalling original software

    Original title: startup

    I reinstalled my original software on my computer and now when I turn on my computer, it says: primary drive 1 not found.  The attention!  Active mode OS install.  Available memory limited to 256 MB.  Strike F1 key to continue, F2 to run the Setup utility.  What can I do to solve my problem?

    Hello

    I suggest you to follow the steps in this link and check if it helps:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/primary-hard-disk-drive-1-not-found/fa3e591f-daeb-47bf-8f6f-3238f9507b6a

    It will be useful.

  • Portege R700 - Windows 7 32-bit - NETWORK adapter driver does not work.

    Hi all

    I rebuilt a Portege R700 with Windows 7 32-bit o/s. I downloaded the drivers from the Toshiba site but could not get the only rider listed working card. It seems to install ok but will not work. If I try to 'put to date pilot' with Device Manager and point to the files expanded, he said that the required software is not found.

    Is there a driver that works and can someone tell me where it is please?

    Concerning

    Dave

    > No idea what driver NETWORK card works and also which driver, I need for the controller PCI of communication Simple?

    This seems to be the controller of Intel AMT.
    You can download the driver form Intel page.
    Search for Intel AMT or check this link to the page of the Toshiba driver:

    [Intel Management Engine Interface | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 5379 & selSh ortMod = 1019 & language = 13 & selOS = 29 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 75561 & OSI D = 29 & driverLanguage = 42]

  • HP 802. 11b / g wireless network adapter driver is not compatible windows 8

    I have a HP Pavilion P7-1054 and my RealtecNetwork adapter does not work after installation of window 8, 64-bit.  Have an error "network adapter is not available.

    Well, I think I got the LAN adaptors to work.  That I did use the HP System Recovery and load Windows 8, to my surprise, as I thought it was Windows 7 system in the computer.  Because it just to load the system and not the Applications when I checked this morning I had Internet and Email.  So I think that what has happened is the Internet of ESet security has done will not stop and this has prevented the loading of drivers.  So I thank you for your help, all right.  Now to learn a new operating system.

  • Local NETWORK adapter DNS does not work after connecting to Anyconnect

    Hello

    Am stuck with a problem with Cisco Any connect.

    My organization has a domain name (for example, domain.com) and the local NETWORK card is configured with the IP Address of the DNS server to resolve host names. Connectionless Cisco Any-connect the resolution on LAN is going very well and I am able to solve the COMPLETE domain name (for example, name1.domain.com).

    Now, when I connect Cisco-plug any software provided by customers, the all-connect also provides a DNS server IP in the map virtual all - Connect, and once connected to the VPN is not identify the FQDNs on local network (for example, name1.domain.com), he solves all the FQDN behind the VPN (for example name2.foreigndomain.com)

    On troubleshooting, we checked out the route for the DNS on VPN server has liked metric and resolution of FULL domain name is passing through the DNS on the VPN server. Now since the DNS from VPN server has no DNS on the LAN (or FQDN on LAN) server information it doesnot solve.

    Note: Here "domain.com" and "foreigndomain.com" are 2 separate institutions.

    I was going through some documents and seen on the split-dns VPN configuration but was not sure if it's the real solution.

    Wish I had the solution so that even that my Cisco Any-Connect be connected DNS traffic to 'foreigndomain.com' must be passed on the rest to another VPN all DNS resolution to get by using the local configuration of NIC DNS.

    Any help would be much appreciated.

    Thank you...

    Hello

    As you mentioned the right way is to set up a split in this way DNS only DNS for domain name queries FULL configured on the SAA will be routed on the tunnel to the ASA DNS server configured for the tunnel traffic

    You can get more detailed information in the following document:

    http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  • No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

    No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

    Hello

    Know what type of network card you have and download the drivers of its supplier.

    It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Network Adapter Driver Model DV6 - 2173cl

    I had to reinstall Win 7 Home Premium 64 Bit due to a virus problem.  I have re installed all the drivers for the model of this site.  I had no problem until the network adapter driver.  Under other devices in Device Manager, I have 3 yellow exclamation points, starting the NIC and 2 lower than unknown devices.  I tried several times to delete the drivers and re - install with the chance to know.  Any help would be greatly appreciated!

    PCBS

    You are the very welcome.

    Here is the link to the other driver that interests you:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&DLC=en&LC=en&OS=4063&product=5273547&sw_lang=

  • ESXI how to install the network adapter driver

    Hi all:

    My ESXI5.5 has been installed, but find that the network card can not be identified, how to install the network adapter driver.

    Thank you very much

    Hello

    Follow the VMware KB for the installation of the NIC driver, hope it helps.

    VMware KB: Cards not detected on a host ESX ESXi network

  • network controller driver is not installed

    My HP n6220 wifi does not work,

    my wireless assistant says that it is disabled in Device Manager, when you check the device displays Manager this network controller driver is not installed

    My equipment is:

    PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C & REV_05

    PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C

    PCI\VEN_8086 & DEV_4220 & CC_028000

    PCI\VEN_8086 & DEV_4220 & CC_0280

    Concerning

    Hello:

    You need the wireless driver Intel support for your laptop and driver page...

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=447348 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48946_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  • network controller driver is not installed and is not listed in hp wireless

    network controller driver is not installed and wireless is not listed in hp palivion 15-d007sia. I come down from the 8.1 for windows windows 7. and start many this problem

    hardware ID:

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
    PCI\VEN_168C & DEV_0036 & CC_028000
    PCI\VEN_168C & DEV_0036 & CC_0280

    pls help,

    Please click here to download and install the driver

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • HP laptop - 15-ac129ne: network controller driver is not installed and is not listed in hp 15-ac129ne wireless (windows 8)

    network controller driver is not installed and is not listed in hp 15-ac129ne wireless (windows 8)

    HI Reda Ben Slimane,

    You can specify your product?

    is this an Elitebook, Probook, Pavilion...

    Kind regards.

  • Backup failed with error 18: the backup drive is not found

    Hello

    My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

    So far I have tried:

    -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

    -Remove TimeMachine.plist and restart my mac

    -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

    I share this time capsule with my wife and she has no problem with that.

    I can only think of a possible alternation I did which could cause this problem.

    Because of unstable WiFi problem, I had deleted

    com Apple.Airport.Preferences.plist

    com.Apple.Network.identification.plist

    NetworkInterfaces.plist

    Preferences.plist

    or other files and reboot my mac * before * I had this problem with time capsule.

    However, this is not the first time I do it, and it wasn't a problem before...

    This could be the reason? If so, how to restore the network settings?

    Please help me with this problem. Really appreciate!

    Ted

    Here is a copy of the Console:

    24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

    24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

    24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

    24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

    24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

    24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

    24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

    24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

    24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

    24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

    24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

    24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

    24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

    24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

    24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

    24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

    24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

    24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

    24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

    24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

    24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

    24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

    24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

    24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

    24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

    24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

    24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

    24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

    24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

    24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

    24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

    24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

    24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

    What model is the TC?

    Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

    (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

    Also give me some screenshots of the TC installing airport utility.

    Can you get it in the Finder?

  • Get a Bluetooth device message"driver is not found when you connect Bluetooth

    original title: Bluetooth connectivity problems

    Hello

    I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

    Hi autumnv92,

    Were there any changes made to the computer before the question?
     
    Check out the following and check:
    Method 1:
    Open the hardware and devices Troubleshooter
     
    Method 2:
    Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
    Method 3:
    See the following steps:
    1. turn on your bluetooth device
    2. right-click the icon for the device in the system status bar
    3. choose / click on "show bluetooth devices.
    4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
    5. simply remove from the list.
    And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
     
    Method 4:
    Bluetooth devices do not work correctly on a computer that is running Windows 7

     
    Also check these links for more information:
      
    Add a Bluetooth device to your computer
     
    Hope this information helps.

  • device driver Bluetooth not found in windows 7hb update?

    I have not found a bluetooth device driver so please help...

    /

    Hello

    1. What is the number of brand and model of the computer?

    2. What is the message code error that you experience when you try to use the Bluetooth software?

    3. what was the recent change in hardware or software performed on the computer before the question?

    Please follow the steps mentioned below to help solve the problem.

    Note: Follow the troubleshooting steps in order of effective troubleshooting and compatibility checks.

    Method 1

    Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

    http://support.Microsoft.com/kb/2654568

    Method 2

    Set up a Bluetooth compatible device

    http://Windows.Microsoft.com/en-my/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Refer,

    Connect to Bluetooth and other wireless or network devices

    http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

    I hope this helps.

Maybe you are looking for

  • Cancel the iTunes game that changed versions of my music to different

    I downloaded a lot of music from a CD over the years and then added to my iTunes library on my phone. I recently got a new phone and used the cloud as my backup. Now, a lot of songs are different versions than the original that I downloaded and I don

  • Got a new mac used.

    Hello! I had a 'new' mac and its rebootet, so he said I should install OS X Yosemite. But I need an apple ID to download it from the app store, I did an appleid and I can't download it yet! "This identifier apple has not yet been used with the app st

  • How to make boxes to the letters for my alias iCloud in Mac Mail

    How to make mailboxes mailbox for my alias iCloud in Mac Mail? I have just set up my e-mail address of iCloud for the first time.  I had an Apple account for many years, but had not hitherto iCloud email address.  After that, Mac Mail automatically c

  • downloaded v.21, but do not get new user interface

    I downloaded the latest version several times. I want the new UI, but my browser will not convert to the new user interface. I don't know if there is an option somewhere is going to fix this problem, or what is happening. Any help would be appreciate

  • How to get out of a while loop?

    How can I get out a while loop? I'm new to Labview and I tried to make my first Labview program. I took an old example, a sieve to primes. The old Erasthotenes sieve. Similar to (Visual Basic example): While (l Teiler = TeilerArray (l)