Publication support

Similar Questions

• Don't Flash Builder 4.7 problem - no platform BB

  Hi, I installed the FB 4.7 on my PC.

  I downloaded the SDK of AIR in BB Site and installed.

  I tried to create a project, but there are only two platforms listed, it's to say, iOS and Android and no BB it.

  Anyone faced the same problem before? 0o0o

  I use Adobe Flash Builder 4.7 for my Blackberry 10 development, although I use Macbook would highlight, but I also had FB4.7 installed on the PC. It is quiet easy to install BB Developer tools on PC.

  1. first of all, you must run FB4.7 with administrative control.

  2. in your IDE FB4.7 Menu, click help-> install BB 10 publication support or install new software-> type "Blackberry" next to work with, now, you will see the option of ' Blackberry plugin for Flash Builder 4.7... '-> option-> check on BB OS Support checkbox statement select 10, press 'Next' then finished once installed.

  3. restart your Flash Builder and try to create the new project Mobile AS3 or Flex Mobile, you will see Blackberry option along with two others.

  Note: BB 10.1 and before, support Adobe AIR version 3.1 only so make sure that you have not superimposed latest version of Adobe AIR in your Flash Builder.

  Ghislaine

• Is the version of DPS for creative cloud supports Apple newsstand publication?

  Is the current version of DPS for creative cloud supports Apple newsstand publication?

  If this is not the case, what is the workflow (and fresh product) to do.

  Unique Edition of DPS (DPS with CC) does not support subscriptions since it is a standalone or built in app. So, he can't stand booth (for the kiosk, it is mandatory to have a subscription).

  You can go for DPS monthly Pro ($495 per month) with the help of which you can build an application of newsstand.

• publication of my ipod touch support

  I watch a video on how to publish a collection on my ipod folder. In all the information and videos on it, there is a tab that says hard Drive_set upward to the title of the publication. My hard drive tab says hard drive Email export. I tried every way I can think to change it, but cannot. My flickr and Facebook tabs all tell the installation program, but not the hard a drive. No idea how to get the hard drive to show configuration option and why mine says only by e-mail. My ligthroom is new and I was not publish it before so I don't think I would have changed soemthing by accident.

  You can also just right-click on the line "Hard Drive" and choose "create another publication through ' Hard Drive ' Service...":

  

  Beat

• Support for publication & Preview

  Hi, for the first time using the new beta version, and I think I might be going crazy.

  I have business account

  1. I created my app, it loaded via itunes, icon sets in, however when I click on it, nothing appears, just white, no BONES nav or anything

  2. I did nine files provisioning etc. to do what was in order. All signed etc.

  3. I have items published and updated in the project.

  What I am doing wrong? I miss content viewer.

  If the application load and launch, splendid! Time to look your Collections and check on your process.

  Your top level collection must have a collection in it (I'll call him "Launch").

  Launch needs to have content (articles, banners, additional collections) like this:

  (upper level)

  (Launch)

  (Articles, banners, etc.).

  When you start the application, launch will appear and show the items, banners, etc. that it contains.

  Launch will also appear in the Menu of your application.

  Now to see things.

  I hope you are using a preview app. This is an option when you installed the app (first screen for the whole app building)

  If you use an application overview and want to see your orders, click on the preview icon in the upper right corner of the portal - wait for the progress bar on the end, and then breathe before going to your device. Views change or raise the app to see updated of bubbles.

  For more information and guidance, see the Quick Start Guide and HELP.

  HTH - Colin

• Window.Open is not supported by 40.0. + (39.0.0 and below of), can this please be corrected?

  I often visit websites that will be, when the user clicks on a link or an action takes place, a new window will appear with the contents of the URL or the desired action (as when you pay a bill it is redirect to another provider who then handles the transaction). A few days earlier, I tried to pay a Bill and Firefox gave me a blank window but inspect 'command-u' shows that the HTML is there. When I did it through Safari, it worked. Today, I wanted access to a ProQuest database via a link provided by the UCLA Library and I got the same result: an empty window with HTML code appears when 'command-u' is used. Surprisingly, paste the link in a new browser window did produce the content. But the original empty browser window not showing anything even if it is re-charge. Both of the actions that I describe are produced by scripts on these two very different sites, but Firefox response is the same: a browser window empty.

  To isolate it, I tried the simplest: I used window.open in my work site to send the visitor to the Publisher of origin of my work. The following code snippet is an example of this approach:

  "" < a href = "http://link.aps.org/abstract/PRL/v72/p1658"

      onclick="window.open(this.href);return false">original publication</a>.
  

  By clicking on the link used to open a new browser window at aps.org.

  But now it does not after the upgrade to 40.0. + (currently at 40.0.3).

  It is, as far as I know, a call HTML "supported". And it works for 39.0.0 up to 34.0.5 (could have been furtherback, but I don't see the point).

  I think that it is a major flaw with 40.0. + and must be fixed as soon as possible.

  Thank you for reading this far.

  (This post was made from a Mac Pro [Xeon], kept at 10.6.8 for complex reasons. But the results are identical to the terms 10.10.3 elsewhere.)

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  In the address bar, type Subject: preferences #content< enter >
  Search for block windows blocker. To his right, press on Exceptions.

  Do the same for any program blocking / modules.

• I'll have a publication error during export

  Need help, then click Export on my film I get unable to prepare the project for publication (the project might not be prepared for publication because the error) error in user parameter list I don't know what that means or how to fix it

  take the screenshot of the entire screen when you get the error

  How to take a screenshot on your Mac - Apple Support

  Take a screenshot

  1. Press command (⌘) - Shift - 3.
  2. Find the screenshot as a PNG on your desktop file.

  

• Toshiba Canvio 3TO HDD - does it support Win XP

  I'm looking for clarification of a new Toshiba Canvio external (3.5 in.) 3 hard to office, I bought Saturday in Zurich.
  I see on the area (under the heading - operating systems) new systems are listed. The only not listed is Windows XP.

  Yes, I know, that as April last Microsoft does support more XP, but as a supporter of the tech, I am also aware - through various publications of the computer industry, tech support Web sites and newsletters online (at least) that all over the world, probably more than a third or more of the computers use even the XP operating system.

  As I support technician private (which most cover newer systems) I have (since last spring) 30 + people I support who have decided
  stay with XP for a while. (I intend to support all the of them until my retirement at the end of this year).

  The last external Toshiba I bought (back up their data - last summer - listed for XP on the side of the box. A new does not list it. My question is, of course, (before I open the new Toshiba box) hardware will work fine with XP.

  I fully understand that their corporate point of view no matter what manufacturer of HD would not care claim no responsibility for the data via an operating system supported 'more '. And I quite accept it... and this responsibility for data.
  And I guess, basically, that's WHY a company would prepare the list is no longer an abandoned operating system.

  But I just wanted to ask (as mentioned above) if someone could give me a tip as to if this new WILLINGNESS of HD work with data on a XP computer.

  Thank you, in advance, for any info or advice...
  Mike

  But I just wanted to ask (as mentioned above) if someone could give me a tip as to if this new WILLINGNESS of HD work with data on a XP computer.

  You take on this HARD drive?
  3 TB Canvio desktop external hard drive Toshiba
  http://www.Toshiba.com/us/accessorie...k/HDWC130XK3J1

  As noted on the page Toshiba; It is a plug ' n play HDD and Win XP is supported.
  This means you don't need drivers in order to use this HARD drive... so I wonder why this HARD drive should NOT work under Win XP computer...

  You are right; Microsoft ended in own support of Win XP but in my opinion there is nothing to do with the use of this HARD drive...

• Publication problems

  I am a customer of stand alone.  I publish to my University manually using Fetch and my local folder.

  Since the upgrade, I have to publish on the site.  I can't get there.  The ball continues spinning. Where on the site can I find the editing button?

  What the hell do you mean by a stand alone client?  With iWeb now as supported a product not there is nothing other than a single client.  You can be anything else.

  When you say upgrade, upgrade how - iWeb, Mac OSX?  You will have to provide much more information and even be specific as to what you've actually upgraded.

  What do you mean by "publish on the site" and "can't get there?  Find where - what does that mean?

  If you use iWeb 09, which is iWeb 3, so you have options of publication of site.  You must click on the name of the website in the top left and then the options will be displayed, which will be published via ftp and then publish to a local folder.  Click on this option and you can still post and then use Fetch to upload to the server in the same way.

• ENVY 700-515xt: RAID 1 support WANT 700-515xt Office

  Envy my new 700-515xt (product # K7X03AV), MSI Kaili2 motherboard, Chipset Intel Z97/Z87, operating system Windows 7 RAID 1 support and if so what should I do to set it up.

  Hello

  1. This publication articlewill give you some information note in order to read at least twice.
  2. Make a complete disk image system hard by as a precaution.
  3. All data on the target drive will be more written to return it to the top before you continue.
  4. Install theIntel RAID rapid storage technology driver (TSRI).
  5. Go into MSCONFIG and set the boot in safe mode and save the changes.
  6. Turn off and restart your PC in BIOS menu (key to tap the ESC after plugging).
  7. Select F10 for BIOS configuration and then go to storage--> Storage Options Menu and change the emulation of SATA RAID.  Save the changes and start safe mode.
  8. If OK at this stage then return to MSCONFIG---> Boot and uncheck safe startup, save changes and restart.
  9. If OK at this stage then your PC is ready to configure RAID.
  10. Go to control panel, and then select TSRI.
  11. Go to the help screens and examine how to set up a RAID 1 volume.

• which processors can take a motherboard supported very 4101p (494035-001) jal50 used on compaq presario cq40?

  I have a compaq presario cq40-142tu, with a celeron t1600 installed. I want to replace this with a faster processor but can't find a site that lists all the processors that are compatible with the motherboard, which is a worm of 4101P jal50 1 or 494035-001.  as the celeron t1600 has a front side bus at 667 mhz, I guess procies upgrade as possible would be a t7600 to better or at least a t5500, since these procies run at the fsb even.  any advice on where to find a list of processors supported for this motherboard would be much appreciated.

  It took some time, but I finally got my hands on a t5850.  Installed and it works like a charm! a celeron t1600 it is now on a core 2 duo procie.  also improved the hard disk in the series hitachi 160 GB 5400 RPM to a 640 GB 7200 RPM samsung. also changed the RAM of 2 GB (1x2Go) tech of micron for gskill 4 GB (2x2gb) RAM.  OS is win 7 ultimate 64-bit, standard was vista 32.  one thing I noticed, though. the Rams are running at 667 mhz even though they are valued at 800, and I have absolutely no idea on how to change this. Publication of the research on some more and I think that the jury can also support 800 mhz fsb procies, might try that also later on. So far I am very satisfied with the improvement. Oh, to be on the safe side, be sure to upgrade to the latest version of the bios. mine was initially f.14, not f66a. problem solved!

• Publication of data on a webserver cRio

  Hello

  We run a cRio 9022 and I have a file Labview real-time sensor data reading. The file runs when the Rio turns on, but for me to see the data in real time, I reset the vi. So I thought just to post the file to a Web server, so I can just login and look at the data via a web browser at any time, without resetting the host file. However, I had trouble publishing the file on the network. I went through all the publication be tutorials and tutorials of remote panels, but I web get "Access denied" or "Client Server does not support...". "or just a mistake of connection not made not of web.

  Any ideas would be really helpful. I'm fairly new to Labview so please excuse my naivness.

  Thank you!

  These links have helped when I did recently.

  Configuration of a real-time target remote façade panels

  Tutorial: Create and access a Web Service from LabVIEW

  LabVIEW Web Services FAQ

  The system that is running the browser used to access the cRIO will need to have installed at least a compatible (for what is on the cRIO RT system) the LabVIEW runtime version

  In my case, I enter this in the address bar of FireFox (which works better for me than IE) http://192.168.84.199: 8000Fast_Regen_Shutter.html and it just connects and works.

• Sometimes the clips in Windows Movie Maker will not play during preview and not at all after publication...

  Hello!  I just create a movie using Windows Movie Maker (HP Pavilion dv6000/Windows Vista Home Premium).  During the PREVIEW, the first part of the video of my film sometimes will not play (view) while the audio continues. Sometimes he will play (view).  All clips are saved in the right place, the file formats are correct, and everything else that I think is done correctly.  In addition, after the publication of the video, he did the same thing; some parts of the beginning is not playing (see) only the audio.  I believe that this can have started happening after a few times when an error message pops up saying something like "Video player has stopped responding, but has revived with success...» "or something like that.

  Now, I tried a few things to try to fix the problem.  I noticed that if I take the transitions and effects on the clips then they play but every time. I don't know why this happens only at the beginning of the movie and not all of the film since I also have clips with transitions and effects in the end.  Help!  This is my first time using this program/do a movie (and it's really good if I must say for me... he can win an Oscar! * smile *), but I wonder if I did something by mistake at the origin of this problem...

  Signature

  "Confused."

  KW03, I wish allows you to check if the same thing happens with the Movie Maker live, and this will give us an idea of the question of whether it is related to the effects of media player or your codecs. Also test it in another account that the component for WMM store is different on each profile. I've included the steps:
  http://download.live.com/MovieMaker
  (Note that you can select exactly what you want to install once you load the installation process)

  • 1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

    Create a new user profile:

    Follow these steps to create a new account, we can test:

    (To remove the test profile follow the steps above and choose to remove the account from the user accounts).

    If the work of nine and you discover you have a profile corrupted, take the measures listed in the following article to copy your data to the new: difficulty a user profile is corrupted

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the publication of video in Movie Maker, it has a large green block down and extends the video

  I used a video camera to make a video and down it loaded on my computer.  Director of Windows wouldn't let me not download it from there, I guess that he could not read, so I converted it on AVS video converter 7.1 for mp4, which was unreadable on windows movie maker.  I then converted it to an avi and easily, he was transferred.  My problem is now, after the publication of the final draft of the film, he shows a huge green block at the bottom of the video and stretches horizontally on video.  This is not displayed when you edit the movie in windows movie maker, please help.

  Hello

  Since you used the 3 part video conversion software, we have no way of knowing what has occurred with the video. The only thing we can suggest is to follow the instructions in the following articles using the original video recorded and imported into Movie Maker:

  http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-steps

  http://support.Microsoft.com/kb/930435

• Supported RAM r815 config - Dual Rank against Quad Rank

  Hello

  I'm hoping to find info a bit newer on the supported RAM for a r815 configurations.

  The latest info that I could find are this Date 2010 dated doc here:

  www.dell.com/.../Poweredge-R815-Technical-Guidebook2010.pdf

  According to this document, there is no supported RAM configurations employing Dual Rank 16 GB DIMMS.  Specifically, note the configurations GB 256 and 512 all call for dual rank DIMMS of 8 GB or 16GB quad rank DIMM.

  I want to know is this:

  Is it a hardware limitation that persists today or was this sheet a function of the type and size of the DIMM modules available at time of publication?  Go QR DIMM means drop the speed of RAM at 1 066 MHz, so there is a penalty to pay for the use of QR DIMM in any config file.  Can anyone tell me for sure if this limitation still exists?

  Thank you for your time!

  TheITSource.

  While the R815 did not actively support 16GB dual Rank DIMMS at the time of its release, it currently supports them. It seems that the support has been added for the 16 GB dual rank DIMMS by the end of 2011.

  One thing I would check before trying to install, it's that the R815 BIOS and iDrac are up-to-date and current.