Pulse gap and inaccurate measures breed (Smartband2 with Android Lifelog)

Similar Questions

• scanning voltage and current measurement for Keithley 2400

  Dear all

  Hello

  can someone help me?

  Despite days nearlly10 I am option to find any program LabVIEW 2010 for sweeping the voltage and measure current who works with RS-232, I have a end not have nothing exept examples read single and multiple data. I tried to SmartData labview and changed a few prorgram gpib to RS - 232, but I couldn't.

  In another attempt to find a good VI "votltage scanning and current measurement" that work with RS-232 in labview 5.1.1. I have converted in 2008, but it takes old driver (ke24xx.dll) and do not work in my labview 2010 and I could ' t find older driver.

  My thesis project was halted in those 10 days, and I couldn't do anything for our keithley.

  Please helpe...

  in the following, I have attached these files:

  1.-first, what voltage scan that works with GPIB

  2 - Vi that I change the gpib for visa (rs232) port that I don't know why it doesn't work.

  3. it is Vi related to the "sweeping and current measurement votltage" that works with the RS-232, but it takes old dirver so I can't use it.

  4-slot-VI necessary for the implementation of program 3 (but there is no driver for these subVIs) was attached to the reply message of this post

  If any body has this program ("scan votltage and current measurement" running rs - 232) please send to me

  Thanks in advance.

  None of you attached the screws are the driver OR you spoke. There is no conversion required for this driver.

• Measurement and Automation does not open and generates the MAXKnownException error with an unknown exception.

  Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception.

  Heres the log

  Context where the exception was taken:
  (No context - the unhandled exception)

  Size version of Base module
  -------------------- -------- -------- ------------------
  NIMax.exe 00400000 0006 has 000 4.6.0.49152
  ntdll.dll 770E0000 00180000 6.1.7601.18247
  00110000-76060000 6.1.7601.18409 Kernel32.dll
  KERNELBASE.dll 74E00000 00047000 6.1.7601.18409
  SYSFER. 74830000 00072000 12.1.1101.401 DLL
  1BFB0000 0001 NiMaxImp.dll B 000 4.6.0.49152
  Shell32.dll 74E50000 00C4A000 6.1.7601.18429
  Msvcrt.dll 76830000 000AC000 7.0.7601.17744
  74 00000 00057000 6.1.7601.17514 SHLWAPI.dll
  76740000 00090000 6.1.7601.18275 Gdi32.dll
  00100000 76480000 6.1.7601.17514 User32.dll
  Advapi32.dll 75DD0000 000 A 0000 6.1.7601.18247
  sechost.dll 76CC0000 00019000 6.1.7600.16385
  000F0000 rpcrt4.dll 76980000 6.1.7601.18205
  SspiCli.dll 74AE0000 00060000 6.1.7601.18443
  CRYPTBASE.dll 74AD0000 0000 C 000 6.1.7600.16385
  LPK.dll 76470000 0000 has 000 6.1.7601.18177
  USP10.dll 768E0000 0009D 000 1.626.7601.18454
  Ole32.dll 75F00000 0015C 000 6.1.7601.17514
  Msvcp90.dll 739F0000 0008E000 9.0.30729.6161
  Msvcr90.dll 73DB0000 000 has 3000 9.0.30729.6161
  74470000 00009000 6.1.7600.16385 VERSION.dll
  IMM32. 00060000 60000 74 6.1.7601.17514 DLL
  000CC000 76BB0000 MSCTF.dll 6.1.7600.16385
  74320000 00021000 6.1.7600.16385 Ntmarta.dll
  Wldap32.dll 00045000 763E0000 6.1.7601.17514
  Uxtheme.dll 6EB20000 00080000 6.1.7600.16385
  NiMaxUI.dll 1C2D0000 00269000 4.6.0.49153
  Msvfw32.dll 6BE30000 00021000 6.1.7601.17514
  73970000 00032000 6.1.7601.17514 WINMM.dll
  Comctl32.dll 73E80000 0019E000 6.10.7601.17514
  Wsock32.dll 73DA0000 00007000 6.1.7600.16385
  74DC0000 00035000 WS2_32.dll 6.1.7601.17514
  NSI.dll 75AA0000 00006000 6.1.7600.16385
  Oleaut32.dll 76580000 0008F000 6.1.7601.17676
  6D8E0000 003 Mfc90u.dll has 1000 9.0.30729.6161
  MSIMG32.dll 6EBA0000 00005000 6.1.7600.16385
  dwmapi.dll 6EB00000 00013000 6.1.7600.16385
  MFC90ENU. DLL 6EAF0000 0000 D 000 9.0.30729.6161
  NiMaxRes.dll 1BFD0000 0007 has 000 4.6.0.49153
  BtMmHook.dll 10000000 00038000 6.4.0.2900
  PSAPI. DLL 76440000 00005000 6.1.7600.16385
  DCIMAN32. DLL 6E1F0000 00006000 6.1.7601.18177
  MXS.dll 1 B 240000 4.6.0.49152 0000F000
  mxsutils.dll 1B4D0000 00041000 4.6.0.49152
  Msvcp71.dll 7C3C0000 0007C 000 7.10.6030.0
  7 360000 00056000 7.10.6030.0 Msvcr71.dll
  mxsout.dll 1 B 400000 00075000 4.6.0.49152
  64600000 00014000 4.257.3.0 nirpc.dll
  Mswsock.dll 73A 90000 0003C 000 6.1.7601.18254
  profapi.dll 76460000 0000B 000 6.1.7600.16385
  mxMax.dll 1BF20000 00086000 4.6.0.49152
  58000000 00240000 6.5.0.3005 AsstntUI.mxx
  MFC80U. DLL 71210000 8.0.50727.6195 0010F000
  MSVCR80.dll 0009B 000 8.0.50727.6195 72E50000
  Comdlg32.dll 20000 75 0007B 000 6.1.7601.17514
  71180000 00087000 8.0.50727.6195 Msvcp80.dll
  ATL80. DLL 6BD70000 0001 B 000 8.0.50727.6195
  MFC80ENU. DLL 730F0000 8.0.50727.6195 0000E000
  59000000 00582000 6.5.0.3005 mxwTask.dll
  00011000 74180000 6.1.7601.17887 Netapi32.dll
  74170000 00009000 6.1.7601.17514 netutils.dll
  74150000 00019000 6.1.7601.17514 srvcli.dll
  wkscli.dll 74140000 6.1.7601.17514 0000F000
  56000000 00148000 6.5.0.3005 mxwRCEng.dll
  mxcal.mXX 1 A 110000 00056000 4.6.0.49152
  mxcat.mXX 1BE20000 000AB000 4.6.0.49152
  nidmfuiu.mXX 04360000 0010D 000 1.11.0.49152
  NIPALU.dll 64000000 00057000 2.1025.3.0
  64500000 00006000 2.1025.3.0 nipalut.dll
  NIPAL32.dll 00007000 1F700000 2.1025.3.0
  SETUPAPI.dll 76240000 0019D 000 6.1.7601.17514
  CFGMGR32.dll 75DA0000 00027000 6.1.7601.17621
  76220000 00012000 6.1.7601.17621 DEVOBJ.dll
  6 280000 00031000 1.9.0.49152 nimdbgu.dll
  6 000000 00017000 1.9.3.49152 niorbu.dll
  nimstsu.dll 6E180000 0001 has 000 1.11.0.49152
  nimhwcfu.dll 6DFD0000 000 B 6000 1.11.0.49152
  6 050000 0001E000 1.9.0.49152 nidimu.dll
  nimxdfu.dll 0003E000 1.10.0.49152 6D0F0000
  nimxpu.dll 6E1B0000 0000 000 1.11.0.49152 B
  Iphlpapi.dll 74280000 0001C 000 6.1.7601.17514
  WINNSI. DLL 74270000 00007000 6.1.7600.16385
  74B 40000 001BD000 11.0.9600.17126 WININET.dll
  76A 70000 API-MS-Win-Downlevel-User32-L1-1-0.dll 00004000 6.2.9200.16492
  770B 0000 API-MS-Win-Downlevel-shlwapi-L1-1-0.dll 00004000 6.2.9200.16492
  75AB0000 API-MS-Win-Downlevel-Version-L1-1-0.dll 00004000 6.2.9200.16492
  76430000 00003000 6.2.9200.16492 API-MS-Win-Downlevel-normaliz-L1-1-0.dll
  normaliz. DLL 76450000 00003000 6.1.7600.16385
  iertutil.dll 75AC0000 00219000 11.0.9600.17126
  76610000 00005000 6.2.9200.16492 API-MS-Win-Downlevel-advapi32-L1-1-0.dll
  76200000 00017000 6.1.7601.17514 USERENV.dll
  nidmxfu.dll 04470000 0049F000 1.12.0.49152
  nimru2u.dll 6EC70000 00044000 2.10.1.49152
  nimmgluu.dll 69830000 0001E000 1.11.0.49152
  nimercu.dll 6DFB0000 00019000 1.11.0.49152
  MFC71. 00106000 140000 7 7.10.6101.0 DLL
  MFC71ENU. 360000 5 0000E000 7.10.3077.0 DLL
  niGPIBui.mxx B 6, 000000 0008E000 2.7.0.49152
  niIVIui.mxx 02CE0000 000D 0000 4.2.0.49152
  niPXIui.mxx A 671 0000 000BC000 2.1280.1.49152
  niRemPXI.mxx 1 A 270000 00057000 4.6.0.49152
  mxRmCfg.dll 1 has 000000 00090000 4.6.0.49152
  niRMui.mxx 1AD70000 000FD000 4.6.0.49152
  NISRLUI.mxx 6B 500000 00061000 3.4.0.49154
  63800000 00010000 2.7.0.49152 NiSpyLog.dll
  niSWui.mxx 1A3B0000 00072000 4.6.0.49152
  niVISAui.mxx 63360000 0017D 000 4.1280.0.49152
  62 30000 0002E000 4.1280.0.49152 niVISAres2.dll
  RICHED32. DLL 40000 00006000 6.1.7601.17514 6FC
  Riched20.dll 61F70000 00076000 5.31.23.1230
  Wshtcpip.dll 73A 80000 00005000 6.1.7600.16385
  nisysapi.dll 68 has 00000-000B 2000 5.5.2.49152
  Dbghelp.dll 70F20000 000EB000 6.1.7601.17514
  -------------------- -------- -------- ------------------

  Application: C:\Program Files (x 86) \National Instruments\MAX\NIMax.exe
  User name: administrator
  OS version: 6.1.7601 (Service Pack 1)
  Exception code: C06D007E
  Exception addr: 74E0C42D

  Sender's address: 74E0C42D
  Function name: RaiseException
  Module name: KERNELBASE
  Parameters: 00000000 00000001 0518FD84 C06D007E
  Source file: (not available)

  Sender's address: 68A3C6F7
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000000 0518FD50 005F59B8 0000001E
  Source file: (not available)

  Sender's address: 68A53D87
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000350 68A791B8 005F59B8 00000000
  Source file: (not available)

  Sender's address: 68A0DC65
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 68A 01680 00000001 68A93BB8 FFFFFF01
  Source file: (not available)

  Sender's address: 68A0DFC4
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 68A 01698
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 1BE27A73
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 020469F0 02047084 0518FED0 1BE76CBA
  Source file: (not available)

  Sender's address: 1BE30D2E
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 02029FA8 02047748 0518FF34 1BE21D4C
  Source file: (not available)

  Sender's address: 1BE35780
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 00000000 00000000 02047818 020469F0
  Source file: (not available)

  Sender's address: 1BE21D4C
  Function name: (not available)
  Module name: mxcat
  Parameters: 02029FA8 1BE6264D 0518FF7C 73DD3433
  Source file: (not available)

  Sender's address: 1BE21CDC
  Function name: (not available)
  Module name: mxcat
  Parameters: 02030018 00000000 00000000 9192C45C
  Source file: (not available)

  Sender's address: 73DD3433
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 00000000 0518FF94 7607338A 02047818
  Source file: (not available)

  Sender's address: 73DD34C7
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 02047818 0518FFD4 77119F72 02047818
  Source file: (not available)

  Sender's address: 7607338A
  Function name: BaseThreadInitThunk
  Name of the module: kernel32
  Parameters: 02047818 00000000 00000000 775D5D69
  Source file: (not available)

  Sender's address: 77119F72
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  Sender's address: 77119F45
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  If I could come with the OS discs for the thing, I think I'd do a new install of Windows 7.

  Mike...

• NOR-DAQ traditional (old) devices of measurement and automation explore 4.7 with LabView2010 under Windows 7.

  In measurement and Automation Explorer 4.7, with LabView2010 in Windows 7, peripheral OR-DAQ traditional (old) appears under devices and Interfaces and it allows me to create a chassis SCXI-1000, and she agrees "Reset for NOR-traditional DAQ.  However, it does not search the modules in the SCXI1000, and when I ask 'trial', he says 'Impossible to test the chassis at this time.'  The entrance of NOR-DAQmx devices for the SCXI-1000 chassis has no problem and detects the modules very well.  I need the Legacy DAQ to a popular former teaching tool that has no equivalent in NOR-DAQmx.

  Unfortunately, NEITHER-DQA traditional (old) for Windows Vista and 7 functions of the only driver on Windows 7 32-bit, as seen on the page of the driver at the end of paragraph 1 Solution. I recommend you move your program to DAQmx.

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• Justify the Divs to the left and right of the page with the gaps between the two. Possible?

  I have 4 eponymous divs with different images and rollover Javascript on them, spread horizontally on my page effects.

  I'm trying to align their so there are gaps between each div, but NO space on the right and left side, so that they are tight to the edge. If I put a margin on the right side of 5px, for example, the div right hand still has a gap of 5px, otherwise he's going on the next line.

  Of course, I can make a new rule for the div of the right hand with no margin to the right, but this will make more complex Javascript code with perform effect hover on two types of divs.

  Is it possible to pin the divs to the left and right of the page with an 'auto' margins inbetween them?

  

  I found a solution in any case. I've adjusted to the width of the div so that they coincide closely each side. Then align the images (HTML) 'Left, middle, Hugo, right' so that they are tight against each side and have differences even between them. If all goes well, there is no flaws with this method, it seems to work pretty well.

• consecutive measurements or 6221 with good timing

  OR PCI-6221 allows us to measure some transient phenomena. Our wish is to change the sampling frequency, while measurement is in progress and keep the time stamp on the right. For example, we measure for the first ten seconds with 100kS/s, for the next 90 with 1000kS/s and for the next 900 with 10 s/s.

  Is it possible to use the internal clock to do this? If yes how?

  Dear Kypros

  Technically, you can implement a solution to this request by creating a train of pulses from a meter out. You can change the frequency of this output of cunter on the fly and correlate your acquisition of this counter. Feel free to look at the examples in our developer zone. You can find this useful example:

  http://decibel.NI.com/content/docs/doc-11762

• Is it possible to measure digital signals with devices of simulations?

  The simulated device configuration is the following:

  9174 chassis cDAQ (cDAQ1)

  -9215 (cDAQ1Mod1) (analog in)

  -9401 (cDAQ1Mod2) (digital i/o)

  With a digital line (e.g., line 4), I create a single pulse

  ------^---------....

  where the circumflex indicates the pulse short and simple.

  Is it possible to use a digital line (for example, the line 0) in to measure it in the device simulated using a kind of direct/indirect routing?  If so, how a set to the top of the digital input read task essentially read the output on line 4, internally?

  Thank you.

  N ° as the DAQmx help explains, you do not have this ability with a simulated device.

• How can I change my password? Please don't link to archived answers, they are inadequate and inaccurate

  Thanks for helping with this. I run Thunderbird on Linux and need to access my corp email account, which requires a password change every 90 days.
  I found this archived solution: https://support.mozilla.org/en-US/questions/1029452
  It points to "how to remove E-mail the password stored in thunderbird:
  https://KB.wisc.edu/page.php?id=19006
  But this info is for Windows, then it could use an update for Linux.
  I managed to delete my old password and restart Thunderbird. But T-bird is not connected, do not ask me for a password and does not silently. I checked and there is no password stored.
  I understand that these things are hard to fix (I'm a software dev), but t-bird does not work for me, without being able to use my password by e-mail.

  do not point to the archived answers, they are insufficient and inaccurate

  The link you provided is inadequate or inaccurate.

  But this info is for Windows, then it could use an update for Linux.

  This info is for Windows and Mac OS. The only real difference is the main menu.
  Windows: Tools - Options
  MacOS and Linux: change preferences (Alt-E).

  But T-bird is not connected, do not ask me for a password

  If Thunderbird can not conect to the server, it will prompt for a password. You must first solve the problem of connectivity.

• measurement of current with usb-6009

  Hi, my name is hung and I am a student in electrical engineering... I'm doing a thesis that the project using Labview and acquisition of data NOR UBS-6009 to simulate the function generator, Oscilloscope, Digital Microsoft (DMM)... and now I'm simulating DMM. I managed to measure the voltage and resistance which i use voltage divider method, but I encountered a problem with the current measurement. The problem is the USB-6009 to measure use the current, it measures an incorrect value. I tried to use the current CQI 0-20mA Sample.vi example but it always measures an incorrect value. If NI USB-6009 supports for the measuring current? Is there a way to measure the currents using USB-6009? Please, help me. This thesis project is so important for me. Thank you.

  Hung,

  Since you are a student in electrical engineering, I'll show you how to know the answers to your questions.

  1. review the specifications for the USB-6009 case.  In particular look at the specifications of analog input.

  2. How would you measure current if you had only a voltmeter?  Use the same method with the USB-6009 case.  (Tip: apply the Ohm's law).

  General comment: when using any measuring instrument, always consider maximum permitted values at the entrances so that the instrument is not damaged

  and the measure is accurate.

  Let us know how you do.

  Lynn

• Measurement of resistivity with MyDAQ on TEC ca

  Hello

  I would like to ask for advice: we would like to measure resisitivity Peltier-elements. If we use the DC method, due to the cell voltage-Seebeck effect, we don't get the value of the true resistivity. The common method to use the measure of ca in the case of these devices. I would like to know if it is possible to use a device of MyDAQ for this task? As a first approach do us not need more precision, it would be more as a test of 'broken-element' (there is usually a significant change in the nominal AC resistivity value indicated by the manufacturer).

  What would be the best way to make a simple measurement? What if I use an analog output of the MyDAQ lets say at 1 kHz, and I drive the Peltier element with this AC voltage source? I connect a resistance in the series, and I measure the AC voltage on that drop. After the results, I could calculate the current and the resistance of the AC of the Peltier element? Of course, I choose a resistance so the MyDAQ can drive the network.

  What is your opinion, where to start?

  Thank you!

  Sounds like a good chance to learn more about these devices. In these conditions, I would do the same thing: try with what you have.

  A quick glance at the plug MyDAQ it is clear that the current of the AO is limited to 2 my. I probably set the zone of OCCUPATION for about 2 V and use 1000 ohms in series with the Peltier device. That will keep the current in the 2 limit my. Two lines of AI to measure the tension on fixed resistance and the Peltier device.  Then, you can calculate the unknown resistance.

  If you were doing a production test or did the measure with a DC bias, I advise to use a transformer to couple the AC component in the CC line. This becomes a little more complicated to implement, but has much to versatility.

  Please post after you have tried and let me know what you found.

  Lynn

• Identification system measured by comparing with simulated

  Hello, I want to be able to match a simulated model

  a measure.

  I started with the release of a square to a lowpassfilter rc, and I measure of output.

  In parallel, I want to run the simulated reaction and if possible have the response simulated in the same graph.

  I also want to use Labviews built built-in functions somehow.

  Grateful for more help!

  PS Ce is not a homework problem, I'm not a student, I work as an instructor and I am a beginner with Labview.

  Shit! It works!

  I replaced the blocks in the block of simulation with Labview 2010 vi

  After pressing the stop button, I have the voltage of the rc-filter and simulated in the same graph!

  It's big!

  Thanks Barp!

• Why dose my window have a gap and will not drag down or up to the screen adjustment?

  my window has a gap, that departure is at the bottom, but there is a gap and I can't drag it to get it to connect. And when I try to get the mouse to go to the

  First, I have a very difficult time for the mouse it my mouse bounces up and down. And the dose of window left adjustment right upstairs downstairs.
  I'm going nuts help me please thanks Aja'

  Hello

  Were there any changes made to your computer before this problem?

  To change the display settings, you can try the following steps.

  Method 1:

  Graphics card:
  
  You can uninstall and reinstall the graphics card. To do
   
  1. click on start and then run.
   
  2 type devmgmt.msc, and then press ENTER.
   
  3. the Device Manager will open and you will see graphics card listed.
   
  4. right click on the graphics card and click on uninstall.
   
  5 restart the computer.

  Method 2:
   
  See the link below.

  How to change the appearance of items on the desktop in Windows XP
   
  http://support.Microsoft.com/kb/310543

  Method 3:

  You can also download and install the latest drivers for your site of manufacturers of computer or on the web site of display adapter manufacturers.

  Method 4:
   
  You can try to restore your computer to an earlier point in time when it was working fine. To do this, you can follow the article below:
   
  http://support.Microsoft.com/kb/306084
   
  Please read the article before proceeding with the restoration of the system.

  Hope this information is useful.

• Gaps and spaces between the slices in Dreamweaver

  I'm running OS X 10.5.8 on a MacBook Pro using Photoshop, I created my Web page (with the predefined html specifications) and ruled the areas I wanted to make connections. Once I said to create links, he showed gaps and spaces between the slices. After I transferred my site page is OK in Safari and Chrome, but firefox runs spaces will appear again. What should I do?

  Here is my code:

  < html >

  < head >

  Book of the < title > Brad Hager < /title >

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 ">"

  < style type = "text/css" >

  <!--

  @import url("/site_layout.css");

  a: link {}

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  }

  a: hover {}

  text-decoration: none;

  }

  a: active {}

  text-decoration: none;

  }

  ->

  < / style >

  < / head >

  < body bgcolor = "#FFFFFF" leftmargin = "0" topmargin = "0" marginWidth = "0" marginheight = "0" >

  <! - except for the Web Slice (mybookonline.psd) components - >

  < table width = "1025" height = "769" border = "0" align = "center" cellpadding = "0" cellspacing = "0" id = "Table_01" >

  < b >

  < td colspan = "5" > < img src = "images/mybookonline_01.jpg" width = "1024" height = "20" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "20" alt ="" > < table > "

  < /tr >

  < b >

  < td rowspan = "6" > < img src = "images/mybookonline_02.jpg" width = "3" height = "748" alt ="" > < table > "

  < td > < a href = "/ JPEG/Brad Hager portfolio/index.html" > < img src = "images/advertisingportfolio.jpg" width = "201" height = "16" alt ="" > < /a > < table > "

  < td colspan = "3" > < img src = "images/mybookonline_04.jpg" width = "820" height = "16" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "16" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "3" > < a href = "/ stamp_resume.html" > < img src = "images/resume.jpg" width = "216" height = "15" alt ="" > < /a > < table > "

  < td rowspan = "5" > < img src = "images/mybookonline_06.jpg" width = "805" height = "732" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "15" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "2" rowspan = "2" > < a href = "/ video.html" > < img src = images/creations.jpg"" width = "203" height = "15" alt = "" > < /a > < table > "

  < td > < img src = ' images/curriculum vitae - 09.jpg' width = '13' height = '2' alt = "" > < table >

  < td > < img src = "images/spacer.gif" width = "1" height = "2" alt ="" > < table > "

  < /tr >

  < b >

  < td rowspan = "3" > < img src = "images/mybookonline_09.jpg" width = "13" height = "715" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "13" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "2" > < a href = "/ creations.html" > < img src = images/email.jpg"" width = "203" height = "17" alt = "" > < /a > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "17" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "2" > < img src = "images/mybookonline_11.jpg" width = '203' height = "685" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "685" alt ="" > < table > "

  < /tr >

  < b >

  < td > < img src = "images/spacer.gif" width = "3" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "201" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "2" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "13" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "805" height = "1" alt ="" > < table > "

  < td > < table >

  < /tr >

  < /table >

  <!--end Save for Web Slice components-->

  < script type = "text/javascript" >

  var (("https:" == document.location.protocol) = little? " ") https://SSL ." : " http://www .");

  document. Write (unescape ("% 3Cscript src ='" + little + "some google-analytics.com/ga.js type = ' text/javascript' %3E%3C/script%3E"));))

  < /script >

  < script type = "text/javascript" >

  try {}

  var mouseover = _gat._getTracker("UA-xxxxxx-x");

  pageTracker._trackPageview ();

  } catch (err) {} < /script >

  < / body >

  < script type = "text/javascript" >

  var _gaq = _gaq. [];

  _gaq.push (['_setAccount ', 'UA-10172368-3']);

  _gaq.push (['_trackPageview ']);

  (function() {}

  GA var = document.createElement ('script'); GA.type = ' text/javascript '; GA. Async = true;

  ga.src = ("https:" == document.location.protocol? ) https://SSL ' : ' http://www ( ') + «.google-analytics.com/ga.js ";

  var s = document.getElementsByTagName ('script') [0]; ParentNode.InsertBefore (ga, s);

  })();

  < /script >

  < / html >

  To see how exceptionally bad is written PS HTML (and the reason of your gaps & spaces) count up how many instances of "colspan" and "rowspan", you will find in your code.  Reading-

  http://www.apptools.com/rants/spans.php

• This cable or accessory is not certified and may not work reliably with this iPad.

  I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

  < re-titled by host >

  These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

  Before you try the following steps, make sure that the USB cable and your port is clean!

  1. Restart your iOS device.
  2. Try a different cable certified by Apple or a charger.
  3. Make sure you have the latest version of iOS.
  4. Contact Apple support to implement the service.

  I hope that you will charge your iPad in no time!