purchane new hp probook 4540 s not install window

Similar Questions

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• I have a new laptop and I can not install oovoo to it, can someone help me?

  ????

  I have a new laptop and I can not install oovoo to it, can someone help me?

  Hello

  try their Center for assistance

  http://support.ooVoo.com/ICS/support/default.asp?deptID=4244

• I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... :( I uninstalled the PSE from my old computer software. Can someone help me?

  I have PSE 7 and with official serial number. I have a new laptop and I can not install PES. I'll gett a mistake: not good serial number... I uninstalled the PSE from my old computer software. Can someone help me?

  To locate the serial number:

  ----------------------------

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

• I can't get the CS4 Design Standard to download on my computer... I just bought a new MAC and I can not install my old software.

  I can't get the CS4 Design Standard to download on my computer... I just bought a new MAC and I can not install my old software.

  Have you tried to download the products CS4 download

• Wizard Boot Camp 6.0.1 does not install Windows ISO 10? Application for USB?

  Hey guys, so I bought this Mac Mini back in September and installed Windows 10 through an iso image on the subject. The problem occurred when everything started trolling. As I speak everything crashing... Same Finder. Then I reinstalled everything lost a part of my data because it does not transfer to the Back Up Hard Drive is correctly. Anyway, now I'm on El Capitan, and I can not install Windows 10 ISO images. He is constantly asking me to have a USB key where previously it was not.

  Everyone knows these issues? I don't really have a USB key, a gigantic 5 TB hard.

  1. in which year is the Mini?

  2 yosemite and El Capitan differ by the BCA UI.

  3 was W10 on-site as an upgrade of an existing W7 / W8 + installation using the ISO? Are now trying a clean install?

  4. your Mac can use either an external optical drive or a USB key (or both) to install the W10.

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.

• Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070

  XP SP3... Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070

  I uninstalled the .net framework and reinstalled from the beginning. Still not get it to take, any help would be appreciated.

  Thank you

  Try ' Haralambos Mavromatidis solution suggested this feedback connect.microsoft.com poster:

  Problem was resolved by resetting the security - choose your own switches or use the following for a newspaper at the root of C: file by typing the following in a command prompt:

  %windir%\system32\secedit.exe / configure %windir%\repair\secsetup.inf /db secsetup.sdb/log C:\secedit.log /verbos /cfg

• I deleted Windows Defender on Windows Vista and tried to download and reinstall windows Defender but I gat a message that comes up saying that I should not install windows defender, because it came with the computer.

  deleted the windows on windows defender and impossible to reinstall! Message comes out and says that I should not install windows defender, because it came with windows vista. How can I try to fix it when I have windows Defender on my computer?

  You can not delete Defender in Vista.

  It is part of the Vista operating system.

  You can only activate / it:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender

  Many anti-virus have conflict Defender (McAfee, AVG, etc.), and turn it out / conflict with it.

  Microsoft Security Essentials, it turns off because it has its own version.

  See you soon.

  Mick Murphy - Microsoft partner

• I bought a new hp probook 4540 s, and the fingerprint does not work I installed the new driver but anyway, so help please?

  I've updated all but still, it won't work

  Hi Daniel,.

   

  I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-109053-1

   

  Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106118-1

  Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106091-1

  You can also refer to the thread for your reference.

  http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/HP-ProBook-4540s-fingerprint-sensor-not-detected-useless/TD-p/1942347

  If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.

  http://h30434.www3.HP.com/

  Back to us for any other questions related to Windows.

• Lenovo Y50 fan stops after new OS install and do not install Windows app

  When I perform a new installation of windows using the DVD I bought, the fan stops working. It simply doesn't get it. Even updated BIOS. Also after that I can't find companion and support the app in the store windows and with direct links, they just do not install. Also I can't find a link for lenovo settings application.

  SOLVED heat problem!
  just downgraded the BIOS v1.14

• New: Wizard of e/s not installed correctly.

  I run LV 8.6 and MAX 4.5 (XP, SP3, AMD64x2-6 GHz, 4 GB of RAM, 3 TB HARD drive).

  LV works perfectly.

  However, I run into the same problem in the past when you try to run the Deputy express.vi of io ("MAX or Instrument I/O Assistant not installed correctly. Install from CD driver LV '),

  I installed the CD of drivers of LV (the 1-2-3 March 2008 version, it should work, it did in the past).

  But at present no Assistant IO shows upward.

  Then, I downloaded separately and installed the driver again I have O-Assistant, but without success.

  I remember the past, I encountered this same problem has been resolved one way or another, but I did not document how.

  Help is appreciated.

  Hello Reteb1,

  I'm sorry to hear about your problems with the e/s assistant. One thing what could happen, it's the driver installed itself but the Application Programming Interface (API), itself not. You have the VISA Office in your palette of functions? Or is there none of the functions of the i/o device available?

  Then we can check if available in the national folder vi.lib (xx\vi.lib instruments\labview) InstrIOAsst folder or the folder instr is available?

  If they are, we can try to fix the driver via the windows control panel. If they are not; Please run Setup again and check if the API of Labview 8.5 has been selected; You can also consider using a newer driver; OR VISA 4.6 .

  Please let me know if there are other problems.

  Best regards

• new printer deskjet 3511 will not install the full version

  I just bought a new printer a deskjet 3511. I tried for 2 days to get a full installation. I had hp technology works with me all night. I did a full restore. It will not install stll. It downloads that fundamental. I checked my control panel and it does not show a printer is installed at all. Any help would be appreciated. Thank you

  The extracted program him disappears from the screen, is that correct?

  You never see the HP program - DQEX5.exe install screen.

• Windows 7 has not installed windows with the new installation games

  Hi all

  I just installed a fresh copy of Windows 7 Pro, but I noticed that no games have been installed with it (Solitare, Minesweeper, etc.). What is happening with this? Are no games included with the Pro version or have not installed? How can I get back them?

  Thank you!

  Hello.

  By default the Professional SKU does not install any games.

  You can install them yourself by clicking on start-> Control Panel-> programs-> Windows features turn on or off. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Toshiba Tecra S3 - new SSD stuck on JBOD, cannot install windows on it

  I just got myself a Kingston V series 64 GB SSD drive, but I can't it is detected by windows installation programs.
  After looking around, I found that the Tecra S3 drives must be "1RAID 0" and not JBOD to activate windows to
  be installed on it. (unless you use the recovery CD, which I did not right now, even if I wanted to use it)

  I also found the "collar" necessary to get the BIOS to change when you get to 'run the creation '.
  is 1,2,3,4, [Enter].

  But here's the catch: + BIOS does not account for the string... +.
  I type the string, 1234, [Enter], and it cancels my desired, change as if I said NO and set it to JBOD.
  (if I don't type the string on the right, it comes out, but stays 1raid0 and "run the creation" is still there)
  I tried on one of my other drives and it worked fine, but for some reason this drive seems not wanting me to.

  I tried the USB drive (works fine) and the BIOS sees it for what it is, so that the drive works well (from my tests)

  Would be really appreciated any ideas on what to do now, I'm out of ideas on what I did not properly
  Thank you!

  Hello

  > I just got myself a Kingston V series 64 GB SSD drive, but I can't it is detected by windows installers

  Have you included the RAID driver in Windows before you tried to reinstall the OS?
  On the European driver Toshiba page, you can find the RAID driver to be included when installing Windows installation.

  Regarding the change in BIOS RAID;
  I m not very good, but it might be possible that you cannot change the reason the SSD RAID option.
  If other drives are working properly and that the RAID may be changed using a common HARD disk the problem is related to the new SSD drive.

  Maybe you need to update the firmware on the SSD drive to check it out.