Purple screen of death vmware - Dell PowerEdge R410

Similar Questions

• A purple screen of death (.. .exception 14 to the world...) with Vsphere 5.5 and Windows 2012R2 Server (problem solved)

  Hello

  I think it is good to add here...

  I started now to migrate my server under Windows Server R2 2012. The virtual environment is vSphere 5.5 HP DL380G7 servers.

  Today, I have solved a hard crash of the host server after you have added a server Win2012R2. The symptoms are CMTF (purple screen of death) to the host (I was pleased that I have disabled the new customer HA; that would be a blow my other hosts).

  Basic message was "...". exception 14 worldwide xxxx... ».

  I solved it very simple by changing the E1000 to VMXNET3 virtual network card. For me, it looks like a bug to develop by VMware in the next versions. For now it works.

  I hope this information helps you!

  Good luck!

  See this article.

  VMware KB: ESXi 5.x host undergoes a purple diagnosis with errors E1000PollRxRing and E1000DevRx screen

  Frank

• Error MCE - purple screen of death - HP DL360 G6 ESX4.0

  We have a new operation HP DL360 G6 (ESX) 4.0 vsphere.  It is filled with two 5770 Intel Nehalem processors.

  Twice now that we have received control of Machine errors, with a purple screen of death: that is to say:

  9 August 02:36:02 testsys vmkernel: 10:16:49:10.774 cpu8:4767) MCE: 866: MCE on europe8 cpu8: status: Misc:0x5dd880400001100 Addr:0 x 0 0x88000040000200cf: Valid.Misc valid.

  and

  29 Jul 06:27:59 testsys vmkernel: 20:15:27:34.025 cpu10:4281) MCE: 866: MCE on europe8 cpu10: status: 0x8c0000400001009f Misc:0x5dd880400005840 Addr:0 x 578975940: Valid.Misc

  valid. Addr is valid.

  29 Jul 06:27:59 testsys vmkernel: 20:15:27:34.025 cpu9:4288) MCE: 866: MCE on europe8 cpu9: status: 0x8c0000400001009f Misc:0 x 0 x 0 Addr:0: Valid.Misc valid. Addr is valid.

  29 Jul 06:27:59 testsys vmkernel: 20:15:27:34.025 cpu8:4279) MCE: 866: MCE on europe8 cpu8: status: 0x8c0000400001009f Misc:0 x 0 x 0 Addr:0: Valid.Misc valid. Addr is valid.

  We do not have a support contract with HP, (warranty support Just). They asked to take it down and run full diagnostics on it (ugh) as well as to ensure that we have the current firmware (we were).  But why we have to run diag on the disks for this sort of thing escapes me.

  Well, the diagnoses are happily cranking away. I'm just happy that we had put this system into production yet.

  Issues related to the:

  Anyone else had problems with the errors of Machine control with new chips from Intel's Nehalem under ESX?

  Anyone know how I can map the number of CPUs in the vmkernel message to a physical processor? HP actually said that we should "change processors" to diagnose. In my mind, it's clearly a hardware problem and they should understand what cpu is themselves and replace.

  Obviously, we need some sort of a support contract, because guarantee support for this is a little lacking. It is our first server HP (experience with Sun). And so far, I'm not too happy.

  I guess it's off topic for Vmwre ESX, but if anyone has any suggestions as to the quantity, we have to pay to get a decent level of support, I would like to know.

  Errors that you see in the newspaper combined with the control of the machine strongly suggest bad memory.

  -Matt

  VCP, vExpert, Unix Geek

• DELL POWEREDGE R410

  Buongiorno, abbiamo 5 Server PowerEdge R410 con co scaduta, uno di questi ha reported knew uno dei 4 brain SAS 600 GB installation.

  Original da Modello: Segate Cheetah ns.2 ST6600002SS Config Code: 1342 Firmware ER62

  Abbiamo UN drive labor-intensive hard sostitutivo della stessa marca my non marchiato DELL:

  Cheetah NS.2 Model.n. : ST3600002SS Config Code: 1342 ED09 Firmware

  The macchina use it PERC 6i con configurazione RAID5

  Dopo averlo sostituito, controller it ha eseguito correctly he REBUILD raid led e tutto e apparentemente in fruit; emerges VMWARE 5.5 updated 3 certificato DELL.

  Dopo he riavvio del di VMWARE prestazioni delle macchine sono inutilizzabili, con could virtuali che sia in launch Server delay di 4/5 minutes by any operation.

  Tutti i e BIOS I have firmware dei brain sono gia date All version, a meno del nuovo disco che con tool of it vostro Nautilus (A048) NO TR riesce ad aggiornare e was ed alla versione ED09.

  He problema Può essere derivato dal fatto che non e marchiato DELL o Winegardner che dobbiamo it nuovo disco sia guasto?

  Grazie.

  Buongiorno, I have brain DELL non essere dei problemi Migliore introduced a compatibility no fw.

  by just be causa e it disco provi simply because a RAID rimuoverlo dal.

  There I no lo aggiorna pole Nautilus fw sono diversi, no allow di sovrascriverlo.

• Purple screen of death with ESXi 3.4 U4

  Hi all

  I lived I have a strange problem with esxi 3.5 U4. Yesterday morning I got the purple screen on one of my hosts esxi test, if anyone can give me any idea what this error means.

  on the host, it there was only one virtual machine running with ubuntu server on it. The thing I noticed is that my colleague, who install the ubuntu Server I forgot to install vmware tools. Can this be the cause of this error.

  After a reboot and the vmware tools install everything I work, but I don't know what was the problem in the first place, so I appreciate your responses.

  Kind regards

  Lyubo

  Hello

  Definitely check your hardware, here is a link to find some info on the purple screen and error codes:

  http://www.VI-Toolkit.com/wiki/index.php/Vmkerrcode

  --

  Wil

  _____________________________________________________

  Visit VMware developers at http://www.vi-toolkit.com wiki

• Dell PowerEdge R410 sliding ready Rails - no connector CMA inside the rail

  Hello

  I have a second hand that came with Dell R410 sliding ready rails which is mounted in a rack in my 22u rack.  I just bought a new MAC for her, but I found that the outside rails have the ears to fix the MAC (and the support leg), the inner rails that the R410 attaches to did not sense that the arms attach.

  Is someone can confirm if the ready rails to the R410 have ears for the inner rail and if yes, someone has the part number?

  If anyone can take a picture of them if possible that would be great.

  See you soon,.

  Chris

  Bernos,

  Compatible track you talk is part # RGTK7 or P8N8P. Together, they will work with cable management arm, you discussed (part # NN006).

  P8N8p is shown below, as requested.

  

  Let me know if that clarifies things for you.

• DELL POWEREDGE R410 [MS]

  Buongiorno, in data 9 luglio avevo fatto una request di preventivo in quanto he prodotto in oggetto non e più e adapter non e più in co. Siamo UN istituto di vigilanza e abbiamo con urgenza need di UN uscita SUA di UN tecnico per risolvere he problema.

  Certo di a vostro celerate riscontro corinne occasione per porgere

  Web saluti

  Antonio Terlizzi

  Salve,

  Inviato preventivo: Offerta Dell n ° 15428502 client: IT2928460 - SDC MANAGEMENT SRL

  Intervento by he secondo giorno lavorativo successivo eccetto che in caso di problemi di reperimento dei ricambi

  Speaking saluti

  Manual

• ESXI 5.5 GROUP (Purple Screen of Death)

  Dear Sir

  I installed ESXI 5.5 U1

  IBM x 3850 x 5 system

  After the configuration of the machine puts the GROUP below

  

  one please tell what could be the reason.

  regarding

  Browlin

  Post edited by: Browlin

  The problem with map of OPI. That is solved by IBM

• Simulate the purple screen

  Is it possible to simulate the purple screen of death?  If so, how?

  Thank you.

  If it's for ESXi, you can do it using vsish - http://www.ntpro.nl/blog/archives/1388-Lets-create-some-Kernel-Panic-using-vsish.html

  If you are looking for classic ESX, you can do it with vsish, but you will need to get a package of VMware debugging, because vsish is not available on ESX classic by default.

• Strike F1 key to continue after replacing power supply and pulling the battery system on Poweredge R410

  Hi all

  Recently, I replaced a non redundant power supply on my Dell Poweredge R410. During troubleshooting, I also temporarily removed the battery from the system at any given time.

  The server is back up and running, but when booting, I get:

  "The 4 fan speed can change in installation configuration feature and the option card systems

  Press F1 to continue, F2 to run the configuration utility.

  I think that some BIOS setting reset to remove the battery? I also see a lot of forum posts mentioning the cause of this error is the integrated SATA is connected to anything.

  My hard drives are connected to a PERC via the PCI slot, and the machine has an optical drive. I don't see the existence of the optical drive in omreport.

  Here are a few outlets omreport about SATA settings.

  Integrated SATA controller: ATA
  SATA port 0: Auto
  SATA port 1: Off
  SATA port 2: stop
  SATA port 3: Off
  SATA port 4: Off

  Any advice on how to go about this debugging more?

  Thank you!

  Dave

  Yes, it is possible that the optical drive is defective. Check the logs of equipment. Also enter the system BIOS setup using the F2 key and search for devices listed as unknown.

• Host VMware 5.5 - purple screen error

  Hello.

  Spent months last im getting a purple screen error I have attached it. I called dell since we have the guarantee of the server after I showed the them.the screenshot... they said his mistake of vmware. Please help me what error is.

  Hello and welcome to the community:

  The first line megasas_reset_fusion indicates there is a problem with the driver megasas

  Looks like on there is a known issue with the MegaSAS driver and they recommend you upgrade the version of the driver at: 6.506.51.00.1vmw and later

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2052368

  Suhas

• [Solved] Dell PowerEdge R720: Error when will United Nations datastore in VMware ESXI 5.1.0 [SD]

  Buonasera,
  HO a Dell PowerEdge R720 fuori co, build 799733, non riesco ad add a datastore not found da dipped 1.8 to.
  Durante FICS 'add a storage' seleziono disk/Lun, VMFS5, per poi was "Current Disposition of the disc" al, nella casella vedo the con dei locali brain table a couple of partizioni di default.
  Dopo few minuto di attesa mostra una finestra in cui VSphere loses the e outdo if sta tentando di ricollegare.
  Can I try a ricollegarmi senza esito, dopo some UNAMET outdo e di nuovo attiva

  This is the che viene say error:
  Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" of object "ha-datastoresystem" on ESXi '10.2.99.36' failed.

  He guardando Dell Disco local delle partizioni noto:
  1 XXX DatastoresAndVolumnes.PartitionType.0xde not found...
  2 Win95 FAT32 LBA 2.00 GB

  No Yes di cosa is... If my alla fine ho need understand di causa e come lo spazio image Add.
  Allégo ibm_db del disco inquisito: naa.6848f690edfa310018e37ce915ef3fcf

  Come posso lo senza riavviare storage server add it?
  The partizioni in questioned are best-known boot di durante FICS? Oppure posso eliminarle?
  CI sono dei comandi specifici per creare he vmfs volume?

  Grazie in pre-empted by it vostro aiuto

  Salve,

  No we can aiutarla a software level. It forum dedicated to e a soli problemi hardware.

  If dovra rivolgere o al supporto Vmware o a terze aziende.

  Speaking saluti

• Blue screen of death on a Dell computer

  I have a Dell Inspiron computer using Windows 7 Ultimate.

  I have recurring problems with the black screen of death

  At the start, then I get the beeps indicating a video problem

  I tried the following

  Start - D to test LCD

  F8 - Startup Repair

  Restore the previous good

  I tried Microsoft Fixit

  Installed the AMD updates for new drivers

  But the computer still goes to black screen after a period of time, and when the blue screen of death it appears always points to the driver

  ATIKMPAG.sys

  The Dell Diagnostics and it came without errors or problems of Ran

  Then I installed Windows 7 Ultimate still and load all the drivers in a sequence from the Dell

  Everything is good

  Started to install Windows 7 SP1

  Crashed again at the black screen

  What can I do else?

  Thank you

  Inspiron what?  Dell made a lot of Inspiron.

  What is your Dell's Service tag number?

  If the motherboard passes the Self Test (POST) usually, you will hear a short beep.

  You say that you get beeps indicating a video problem (is this 6 beeps or something else?).

  There is no amount of software you can download, install, reinstall will fix a hardware problem - unless you call Geek Squad and they will tell you that your 6 beeps means your system probably has a virus.

  If your system is a portable computer, it may not be much hope for it except to take it to a store where they might have some ideas.

  If the system is a desktop using a discrete video card you may reinsert the card into the slot or use a different location (power off and unplugged of course).  It could be that the card is defective.

  Now, I've read that you have a laptop with external monitor so if you unplug the external monitor to the laptop you still have a problem of material indicated by beep codes?

  If your system boots it so that we can see what you have:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

• VMware ESXi 4 on Dell PowerEdge 2950 CDROM missing in virtual machines

  Hi all

  I installed VMware 4.0 on my Dell PowerEdge 2950, and everything moved very well. I had the ISO image from the support site on the website of VMware and Dell. I installed both with the same problem, once installed, the CD-ROM will not be displayed in any virtual machine, I create.

  I changed the boot parameters, the order of the boot, played with the BIOS settings, and no matter what I do, when I start the virtual machine and open a console window and try to connect on the CDROM, a message displays saying that the device is disconnected.

  I have reinstalled Windows on the box, went to the site of support of Dell and applied each update BIOS patch and firmware of the box. Including the one for the TEAC CDROM, which is in my box.

  Anyone had this problem before? If so, how should I do? I really need this works quickly. Without a CDROM, I can't install software such as SQL Server and others.

  Kind regards

  Michael Lange

  I assume that you have added a CDROm for virtual machines?

  You then specify "logged in/connected to the power on" in the settings of VM page? (I know it's usually obvious.. .but I did it very mistaken once this week.. .accidentally added the CDROM to the VM wrong.)

  What OS your virtual machine is running and you have the installed VMTools?

  If issuing a VMtools install on a windows host, it works, then the Cd drive works as ESX uses the virtual CD Rom to install the tools.

• VMWare ESXi on Dell PowerEdge 840

  I am installing VMWare ESXI on a Dell PowerEdge 840 and it gives the following error message: "the operation of Installation Failed! Cannot find a device of maintenance to write the VMware ESX Server 3i 3.5.0 images. "There are two hard drives and no other than the controller onboard SATA controller.  Any thoughts?

  The VI client is free to install and there is no component license.  If you go to http://ESXi_ip/ , you will see a link to download.   Your ESXi host, it will be 60 days eval mode and you can go to Configuration-licensed proposes to add the serial number that you should have received your registration for free download.