Purple screen when the backup starts

Similar Questions

• Administrator account appear in the logon screen when the computer starts in normal mode, and there is also another account on the computer.

  I use Windows XP. I start my computer and I see an administrator account on the logon screen. I wonder why this account appears. I checked in the Help Center and he said that this account do not appear when I start Windows Mode without failure or when no other account does seem to accept the guest account. But after all, I never start Windows Mode safe and I also have another account on this computer. So why do this administrator account appear and how to hide? I thank.

  Hello

  ·         You are the administrator of the computer?

  You can read the following article to disable the administrator account. You must be logged in an admin account to do this.

  How to disable the Local Administrator account in Windows

• Black screen when the computer starts.

  Original title: Windows startup

  Since today, when I start my computer (windows 7), he crosses to the Welcome to windows screen, then goes to a black screen with just the active mouse - no office. I used ctrl-alt-del and looked at the running processes. There were 2 'runonce' process running, and when I stopped one, it is loaded on the desktop. This happens everytime I turn on the computer. Is there any solution for this?

  Hello

  Thank you for visiting Microsoft Community.

  From the description of the problem, I can understand that your computer goes to a black screen after login. I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What happens when you right click the mouse on the black screen. Do you get the options?
  2. What is the brand and model of your computer?

  Especially this problem appears due to lack, corrupt or incompatible display driver problem, however, there may be other causes as third-party programs collide, virus/malware etc as well attack.

  You can try these methods mentioned below and check if it helps:

  Method 1: Please follow the suggestions listed in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Method 2: I suggest you to run Microsoft Safety Scanner to search for viruses and malware and remove if necessary.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• How can I configure numerical Lock ON when the computer starts?

  I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

  Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

  Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

  PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

  THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

  HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

  .
  
  Bob_in_PGI

  I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

  I now have Windows 7 64 bit.

  There must be someone who knows how to do this.

  Bob in PGI

• The speakers click when the fan starts and stops Equium A100-147

  I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

  Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

  In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

  Thank you for reading.

  Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
  Then worry about don t, I think its OK.

  The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
  Also an Antivirus applications could extend the startup procedure.

  You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

  It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Screen do not maximize mode full-screen when the taskbar is set to hide

  original title: Gap Auto-Hide

  I put my tool bar to auto hide. Normally, a zoomed window will extend to the bottom of the screen when the task bar is hidden. However, whenever I restart Windows, any window that is maximized will only go down insofar as space of the taskbar visible again, even when it is hidden. Turning auto-hide and the new set, but only until that next time that I reboot. Is there a way to fix it permanently? I use XP Pro.

  The problem I have is happening with any program that I open, not only IE and windows, then I would say it's more a problem of Windows.

  I don't think that was said in the original post.

  Check you the Technet Forum - they are the best service.

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/4aa71ed5-3500-4d11-A461-7d80c0847f91/

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Software HP C4380 printer causes delays when the computer starts.

  I don't know what triggered the problem. I had unplugged the printer and reinstalled. Now, when the computer starts, it hangs for 2-3 minutes seeking a device to the USB location 0. That remove the HP software solves the problem. I installed with the latest HP drivers and tried to use only the printer drivers without the scanner software. If I avoids the HP software, Windows installs with a Jungo win driver that causes the same result. It could have been an update of my Windows XP Home SP3 in the meantime I demolished the printer and reinstalled, but I can't follow any other changes.

  Now the printer is useless because of this problem. HP forums suggested disabling a program of tracking of HP under Services.msc, but who has also failed to solve the problem. Any suggestions?

  check the clean boot state, this might help you http://support.microsoft.com/kb/929135

• When the backup space is low, is not the system that is supposed to replace the previous backups?

  When the backup space is low, is not the system that is supposed to replace the previous backups?

  Hello

  Actually, it depends on the backup that has been already set parameters.

  You will find all your answers in the article.

  Should what backup settings I use to maximize my disk space?

• How to remove temporary files, waiting to be written to disk when the computer starts? __

  How to remove temporary files, waiting to be written to disk when the computer starts?

  Hi Reasman,

  Welcome to the Microsoft answers site!

  To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

  You can manually delete the files that are stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• TRYING TO PLAY THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  Original title: papabob68

  have windows 7-

  I'M PLAYING THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  After that, I have to go to master to stop and start again... I have read all the post I can find and I updated the driver and reset the display and SO ON, SO ON, AND...

  I played this game on windows xp and I have done everything but put A BULLET in it and I think about IT!

  I'd be willing to by a new game made for windows 7 but does...

  MANY OF THE POST TALK ABOUT A 64-BIT SYSTEM, BUT MINED IS A 32-BIT, SO THERE HAS NOT BEEN TWO MANY ANSWERS...

  "HELP!" @!@!

  PAPABOB68

  "I updated the driver and reset the display and SO ON, SO ON, AND ON...". »

  It is better to translate 'SO ON'... to something specific, or you can read suggestions for

  have you tried things once again.

  -Include your brand of processor graphics and model as well.

  -The best place for the hotfixes to vintage games is usually on a specific to this game fan site,

  or the developer forums, but...

  "but mine is 32 bits"

  (Assuming you are using the disk depending on the version of the game.)

  -A 32-bit Windows can be an advantage with some games of this vintage (release date of 97) as

  always use a 16-bit Installer, which will run on 32-bit but not 64-bit of Windows.

  Apart from that, there should be no difference between the OS versions for compatibility.

  -However, prior to version 2000 games (and some newer), may have other

  questions that make them run poorly. Audio and color are two common problems.

  -The camera may result from a problem with earlier versions of Open GL, Direct 3D.

  DirectPlay and Glide3D (gone, but not forgotten) can be a problem sometimes too?

  These questions sometimes have patches on based fan sites.

  -Some 97 games maybe still based back that requires using the window BACK, an emulator "BACK."

  Good old games sells some vintage games with DRM (copy of code protection) removed, and installs

  with BACK box automatically.

  They have Panzer General 2 for $10 USD, but if you expect one of their frequent sales you should be

  able to pick up for US $5-$ or less.

  http://www.Gog.com/

  [ EDIT: just watched add it, and it seems to be a DirectX game 9] It must have been updated DX9

  for the downloadable version.

  It can been Direct3D when released.  DX 9 was not released before 2002

  -All on the theme of DirectX. If you have not updated DirectX, you should do it.

  Win7 is not the most recent DX 9, 10 or 11 files when first installed.

  Download installer Web Runtime DirectX end-user of the official Microsoft Download Center ]     

  -You can also use D-Fend Reloaded, which is a user interface that reduces the learning curve for the DOS window.

  The download includes the box and a few BACK based games start practicing.

  D - Fend Reloaded: overview

  Finally, and above all by an effort... An important announcement for all users of the disk based games.

  -A new (since Win10) problems with the old disk based games comes from malicious software developed by MS - DRM blocking.

  If your disc games has a file called - secdrv.sys - on it, the game will be blocked by a

  Windows 'security update' - KB3086255-.

  I have more information about the blocking of the DRM, including how to work around this - here -

  .

• How to avoid the minimizin of the screen when the user down ups slide

  How to avoid the minimizin of the screen when the user ups the down slide.

  Hello

  I guess that not possible because this is a feature of the system. Be able to substitute the blow to the gesture of bottom up would mean for combat when a user can switch to another application. It is not something that an application must be able to do it at all.

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.