Purple tint on monitor

Similar Questions

• HP Officejet 8500 has more: pictures come out with a purple tint

  I printed some photos and they came out great!  Then I tried to print more photos and they all had a purple tint.  I used glossy paper Photo Premium and installed all the HP real new cartridges.  I really need these photos for Christmas gifts, but now they all have a purple tint.  Anyone know what I can do?

  DocCottle,

  I followed all of the documents that you referred me to and done all the suggested fixes.  All Pages print great quality BUT the "calibration" repeatedly failed.   I contacted HP Support by phone and they said it was probably a hardware problem.  Still no pictures to print with a purple tint.

  As you suggest, I'm probably going to get a new printer.  I really appreciate your help!

  Thank you

  Jean

• Dark purple point on monitor dell U2312HM on black screens

  Hello

  I noticed this little earlier, a purple block to eye on my monitor that seems to be getting bigger... And the worst thing is his eye level and only seen on black screens / dark, who use a lot of games and movies... I tried to enter my serial number, but it won't let me... Monitor is not another year...

  THX

  Simpyd,

  Open my monitor of FAQ at the top of this map. Open, my monitor does not have a Service tag, how do I get the Dell service? ».

• Purple tint in Adobe product - no problem of calibration

  Take a look at the attached picture - on the left is a photo black and white I exported out of photoshop after desaturation but open in the viewer transform into image.  On the right is the same picture seen in photoshop - once again after desatuation to convert to black and white.  My monitor is calibrated and photos open in the image viewer or other programs simple appearance correct - but in lightroom or photoshop, they're a shade.

  How can I remove this?

  

  I received the new Spyder and calibrated.  All is now well and the color is gone.

  It seems that my old Xrite having no win8 software work properly in an environment of win8 - or somehome have become defective.

  Thanks for the help

• CQ62-410US stuck with "Several monitor - Clone View" and VGA port does not

  Hello!

  I have a Compaq CQ62-410US computer laptop with an Intel GMA 4500 M (onboard) video card and a port output VGA, Windows 7 x 64 operating system. A few weeks back the screen was broken (kick straight punch of a child) and nothing could be transmitted via the VGA output either, but the laptop booted and I could hear the sound of Windows 7 logon. I never checked before the VGA output port.
  Yesterday, I replaced the screen broke up with and identical. The fine (full-screen) display in case of back work (boot from USB Flash and the sea + test images), but in Windows 7, two vertical black stripes appeared on the sides because lower than the native resolution. The resolution can be changed at native 1366 x 768 "Screen resolution" because the display is set by default to "Multiple monitors" (I have no other monitor connected, only the built-in screen) and "display of Clone. The built-in display is set as secondary and 'Generic non - PnP' is defined as primary. Any attempt to set the integrated display as primary function or to change the mode "display single" / "Extend view" leads to a black screen with the backlight always on, no matter where I change the settings - in the 'screen Resolution' or 'Graphic properties' (from driver Intel). In the 'Screen Resolution' window the pictogram of the screens show a single screen split in two, and when I press the button "Identify" it shows on the screen ' 1 | 2 ", as you left half of the screen is the main display and half right is the secondary display.
  I put a Philips monitor to the VGA port, Windows detects and installs the appropriate driver, but there is no picture any of mode I put - Clone, Extend, unique display - monitor.
  I tested 3 view of the site of Compaq drivers for my device and the GMA 4500 M drivers from Intel, but the problem is the same (with the drivers from the site intel, on I get only black screen with backlighting.) Pilots are unstable, sometimes at the opening session, page is only a black screen (but before the windows loading screen appear very well) that cannot be changed by "Fn + F4" / "F4" (change view) but a black with the backlight is turned off.
  Due to the replacement of the hard disk, I can't use restore of the operating system that is installed at the factory.
  Please advise me how to solve the display problem and enable the port VGA (get the image on the external monitor).
  Thank you in advance.
  SSM there is not output through the VGA input even at the BIOS screen (no material or to issue independent of the operating system support?).

  I have attached a screenshot.

  Update: I started a live Knoppix CD, and I don't find any problem - unique in 1366 x 768 display configuration; I could even play a game in 3D (OpenGL). While hanging from one monitor to the VGA port, it was found, but when trying to print image to it the OS hung. I guess it's a hardware problem, something to do with the video controller.

  

  I thought about it, it's the GPU, I think that some of the contacts are damaged. Today even in the BIOS screen I see in the middle of the screen a vertical thin purple line which was bounded two screens on a single screen, and all now have a purple tint.

  I had a quick glance at the GPU and surprise - it is glued to the motherboard, no sleeve, no welding. The motherboard chipset is also stuck.

  See the attached images.

  Thank you for the excellent support. I will never buy anything with Compaq logo on it.

• Monitor Pavillion22bw: impossible to reset the monitor to factory setting hp

  I've been setting up a new monitor, Pavilion 22 forbw and our laptop brand new, Pavilion x 2 10 detouchable.  When we tried to solve a black band around window, we have adjusted the configuration of the monitor.  Since we are new on both devices and win 8 or 8.1 we must have done something we did not want.  As you may have guessed, we are not really competent in PC set ups.

  Please, help us to these problems.

  1: the monitor display purple tinted image, while the computer screen is normal.

  2: the factory reset on the monitor does not work as if the purple hue is the default setting.

  3: the initial problem of the black band is still there.  We have 22 '' monitor but it shows only the size of a 15 "or more.

  Thank you

  Hello @idontlikewin8,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how a black band is visible on the monitor of your desktop once implemented and I would be happy to help you in this case!

  I provided you with a few steps, you can try below:

  Step 1. Unplug the power cord at the back of the screen and the wall
  Step 2. Press and hold the power button for at least a minute
  Step 3. Plug the power cable in the monitor, and then to the wall outlet (not a power bar or surge protector)
  Step 4. Press the Menu button on the monitor
  Step 5. Navigate to the factory reset option and select
  Step 6. Try a different cable to connect your monitor to your computer

  If the steps above did not resolve your issue, you can try the monitor on a computer or other device to see if the problem persists. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks for posting on the HP Forums. Have a great day!

• HP Deskjet F4180 print photos with a purple hue across

  Hi all, I was hoping that someone can help me. Our HP Deskjet F4180 is printing pictures with a purple tint (usually something in, like a coffee table or wood panelling, comes out magenta-y).

  I tried troubleshooting it myself and it seems there is no problem with the printer cartridge, or the program that I am printing.

  Here is what I tried:

  -current color cartridge replacement with a new one; problem persists

  -cleaning of the cartridge through the HP Solution Center (he asked me to clean, then intermediate clean, then first; tried all three, and the problem still persists)

  -print the photo of Microsoft Office Picture Manager and Microsoft Word

  -change the color balance (I value Magenta - 25; still did not help)

  This problem started after I printed 60 wine labels, which all had purple graphic and black text on them... but I think a lot of printing of purple would cause the printer having less purple coming out, no more...

  Any ideas what the problem may be? I have included a link below to the images show what that is the problem - the first image is how the picture should look like, the second is an analysis of the image printed super-purply (which, moreover, is printed on ordinary printer paper white old).

  http://S1044.Photobucket.com/albums/b447/cappa_j/HP%20Deskjet%20F4180%20error/

  Hi Ciara B,

  I had the intention to get back to you with some comments - thanks for your help! I tried the last steps, you suggested, except to repair, which is what I wanted to avoid .

  I found a solution to the problem though - I completely uninstalled the printer from my computer, then insta. Ed again and it works perfectly! Don't know what the problem is, but reinstall all fixed.

  Thanks again!

• Green function screen changes the video original colors

  Hello.
  I just started using the green screen feature in iMovie and it works great except for one thing.
  It changes some of the colors in my original video and I can't seem to fix it.
  The top image is therefore the original video with green screen and the 2nd image when the functionality of greenscreen and the bottom are applied.

  As soon as it is applied, it changes dark blue skirt of the topic to the violet and also adds a purple tint on silver back, his sword and his shield.
  I tried with different backgrounds and it still changes the color. Also tried in iMovie and same problem.
  If the blue skirt was perform the greenscreen function, it would turn out just see through, is not?
  Any ideas on how to fix it? Thank you in advance! * NOTE: Screenshot taken in iMovie, but I tried them both and same question *.

  

  Lla problem is the magenta used to counter green in the suppression of spill. I don't know how to control it in iMovie, if it is still possible. The question on the forum of iMovie.

• Portege R700 - external monitor color is purple

  The external monitor is with the main color purple.

  The labtop detects the right monitor and all works well, but it is from today a main color purple throughout.

  Its TSF even a projector!

  What about the internal display?
  The color purple appears on the internal screen too?

  In case the internal monitor is OK, the graphics chip should also be OK and in this case, I think that the video output port (RGB / HDMI) or the cable connecting the two devices that can be touched.

  In which case the color purple would appear too on the internal display, then the GPU (graphics chip) was malfunctioning.

  PS: what model of laptop you have excatly and how you connect the external monitor/projector to laptop?

• Satellite Pro L300 - external monitor has a yellow tint to the screen

  I have connected a new external monitor to my Sat Pro L300 and the monitor of the station has a strong tinge of yellow to the display.
  I have tried with other monitors and cables and they do the same screen that is yellow.

  Can anyone suggest what I can do, I tried to change all the color settings, but they don't get rid of the yellow tint.
  Thank you.

  Well, maybe this problem is related to the failure of hardware since will have to show common colors without changing the settings in the color settings in the graphics card Control Panel

  In my opinion this s hardware problem
  However, before I ask a technician for advice I recommend updated the BIOS and reinstall the graphics driver.

• Blue tint to my monitor Gateway under XP Desktop Gateway - graphics card, nVidia, display

  My monitor has a constant bluish tint to it. Green is more yellow than green, and overall visual quality became problematic. I tried to adjust the resolution of the screen, color settings and other settings on the screen, but the tint bluish low quality still prevails.

  I thank you very much for any assistance, you may be able to provide!

  PS - It doesn't seem to be a monitor problem. I plugged the screen on my laptop and it worked perfectly fine.

  Saturday, January 1, 2011 17:00:10 + 0000, Evan Novice wrote:
   
   
  > My monitor has a constant bluish tint to it. Green is more yellow than green, and overall visual quality became problematic. I tried to adjust the resolution of the screen, color settings and other settings on the screen, but the tint bluish low quality still prevails.
  >
  >
  >
  > Thank you for any assistance that you may be able to provide!
  >
  >
  >
  > PS - It doesn't seem to be a monitor problem. I plugged the screen on my laptop and it worked perfectly fine.
   
   
   
  There are several possibilities:
   
  1. the monitor. But if it works correctly on another computer, it is
  is it not.
   
  2. the video card.
   
  3. the driver for the video card.
   
  4. the connection cable from the monitor to the video card. Have you used the
  same cable to connect the monitor to the laptop? If this is not the
  cable.
   
  5. the tightening of the cable. But once again, if you have used the same cable
  and have reconnected, which seem not to be the problem.
   
  So it's probably the video card (more likely) or its driver
  (less likely). The first thing I would try is to make sure that the
  video card is firmly seated in its slot in the motherboard.
   

  Ken Blake (MS-MVP)

• Yellow tint on the second monitor

  I am running Windows Vista 64-bit for my Toshiba laptop.

  When I connect via VGA to a secondary monitor (TV Widescreen), sometimes the colors are good, but most of the time, it has a yellow tint to it. Using the same cable, I connected a different Vista laptop and the color is always great - the pins and ports all looks good, so I have excluded from the TV or the cable is the problem. I tried to download the latest driver on the Toshiba site, and who has fixed the problem of the evening, but this morning, we were back to the same problem. My graphics card is an ATI Radeon 3100. It just seems randomly when it is normal and when he goes wobbly. I literally will not touch anything either, and it back, sometimes falters. Help?

  One thing that you might try using a different cable, who knows. I suspect the port to be deffective. I had an experience once a cable on another computer but not working on my laptop, when I replaced the cable of the work of thing very well, hard to explain.

• Monitor of 22xi HP Pavilion showing the Green tint on the right side

  I've had my Pavilion 22xi for about 8 months now and everything has been fine until a few days ago when a green tint has appeared on the right side of the screen. A pink ghosting of my web browser can also be seen in the upper right when, on a dark background. I use the monitor as a second monitor connected to a macbook via a connector mini displayport HDMI /. The problem occurs on mac and windows.

  I changed the HDMI cables, checked the connections, reset the monitor to factory settings, read through the HP troubleshooting tips and try the monitor with another computer, but the same problem persists.

  I think there is an error with a monitor, but I wanted to ask if there was anything that I'm missing or a solution before contacting HP support.

  Hi Kojiri, sorry to hear that you are having problems with your screen display. One thing that I know that I had problems with was that I have a subwoofer near the monitor and it caused the screen to change the color. I also noticed a slight change in color when I had my base of wireless phone, sitting on the desk next to the screen. Now if this isn't the case for you, I suggest that you please click on the link I provided and try the document that solves the problems of different screen.

  http://support.HP.com/us-en/document/bph05236

  If you are still having problems with the screen, please let me know and I'll be happy to help you further.

  Thanks for your time.

• Dell S2340Mc monitor has a red tint and lines to travel to the top of the screen

  I have a Dell Latitude E6430 with Windows 7 Enterprise 64-bit with SP1 docked to a Dell docking station. I have two Dell S2340Mc IPS monitors - both are at a resolution of 1920 x 1080 as recommended by Windows. The problem started this morning.

  The monitor is 10 months old and has developed a reddish hue with lines travelling to the top of the screen makes it difficult to see anything. I tried using another cable DVI, a different port on the docking station, as well as VGA cable. I also updated the drivers and put my other Dell Monitor (identical) to be the main monitor-no difference. My other Dell Monitor (identical) is very well...

  I also did a factory reset and run the LCD function - this conditioning Panel is shot.

  The monitor model =, short publication line pattern description
  Body =
  * What is the serial number of 20-digit alphanumeric monitor? CN - 0293M 3-64180 - 33U - 1U3T
  * What is the revision number (A00, A01, etc.)? A00
  * What specific model of computer, desktop/laptop? DELL LATITUDE E6430
  * What operating system? WINDOWS 7 ENTERPRISE 64 bit WITH SP1
  * Which video card? DOCKING STATION VIDEO CARD
  * Which ports are available for the video card? 2 2 HDMI, 1 HARBOUR VGA AND DVI
  * Which video output from the video card port video on the port monitor do you use? DVI TO DVI
  * What cable are you using to set the video card to the monitor? DVI CABLE
  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. The resolution must match the monitor'S default resolution-IT
  * Brief description of the problem monitor? THE TINT REDDISH WITH LINES TRAVELLING TO THE TOP OF THE SCREEN

  You see problems when you run the SUBMISSION (built-in Diagnostics), pages 25-26? If so,.
  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open "monitor and safety guarantees.

• Flags of HP touchsmart 23 all in a desktop monitor has a slight tint of red on the left

  I have a HP Pavillion 23 touchsmart all-in-one desktop pc running windows 8.1. My touch screen started showing a slight red tinge on the left side of the screen. The rest of the screen normally shows. I have no idea what may be causing it. I tried to adjust the resolution and colors. I have also checked the power connection and update the video drivers. I am at a loss for what is the cause.

  Hello @Bree0037,

  I understand that your HP Pavilion TouchSmart 23 all-in-One desktop PC has a red tint on the left side of it and looking for assistance. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!