Similar Questions

• Acrobat for 0SX10.8 with the object Inspector?

  When I upgraded my MacBookPro Acrobat OSX10.8 (the highest I can go with my license CS6 Design & Web Premium) lost the functionality of many plug-ins.

  I did research online, but do not yet have a working solution.

  What version of Acrobat will restore the object Inspector?

  X Pro crashes when I open the Tools menu (uninstalled and installed with no good result)

  Pro XI will not accept my serial number CS6 Design & Web Premium or my Acrobat Pro serial number

  Outside the operating system upgrade and subscription to CC, what can I do to get the tools I used to have?

  Valerie

  Funny that the robot says "good answer!"

  In any case, after a day of fly autour, I've updated for Pro X 10.1.15 (no longer available) and when I looked at the screen, I decided to click the icon on the far right in the darker menu bar. And, Lo and behold, there was my functions missing, unchecked. I checked, and my signs Print Production and processing of Document reappeared.

  So, good answer:

  Inspector objects and Page number are tools that can be enabled or disabled.

  Select the tools Panel. Go to the icon of the small drop-down list on the far right of the gray bar dark at the top of the whole menu.

  Enable or disable the various components of the Toolbox by adding or removing a check mark before the name.

• Strange problem with the object Panel.

  Hi all! I found this forum in a desperate attempt to find a solution to my problem. I searched without success, but if has already replied to this question, can someone point me in the right direction?

  FreeHand MXa works with Vista? (Or MX, I tried two versions of the disc in the box). I can install that's fine, no problem at all. When I actually started working, I noticed that the object Panel was not on the right side where it normally is, so I click on the window and you click object. Instead of giving me the Panel, I have a popup that says "Could not complete your request because an unknown command has occurred", and then a little box pop up that looks like it might be the object Panel, but it is empty. No marks, no nothing and it does not meet anything, except when I hit the button of output on this subject. It is the same version I had installed on my old computer. I got a new computer yesterday and I tried to install today and I can't understand why it doesn't let me open the object Panel. I'm so lost without it! Is there another way to work in FreeHand without it? I have Illustrator, but I really prefer working in Freehand for more things I did on a daily basis. It's just much faster for me to do some of the things I do. I need my object Panel...

  This TechNote may help:

  http://go.Adobe.com/kb/ts_tn_12050_en-us

  Judy Arndt

• S205 - problem with the keyboard (right shift key)

  Hello.

  Google couldn't really help me, so I try my luck here

  Two days ago, I met a rather strange problem with the keyboard of my S205 (running Win7 64 bit). For some reason any the right shift key is no longer works as a shift key, but it has the same function as "Alt Gr" key on the right side. FYI: German keyboard. For example, the @ is on the same key as the Q here and normally I have press the AltGr key to type a @. Now the same thing with the right shift key.

  I tried a couple of things already, none of them helped. I have accidentally changed the layout of the keyboard, checked once again in the Control Panel, everything is OK here. No Fn - keys are activated. I tried to plug in an external USB keyboard - on that one, the shift key works fine. The right shift key is the only key that does not work properly. I even tried the keyboard on the screen so I could see which key was pressed when I pressed the SHIFT key and she showed the "Alt Gr" - button is pressed.

  I am open to any suggestion. Thank you

  In case someone might have the same problem - unfortunately I don't have a solution. He solved somehow itself a few months later. Really strange thing, but the key is working again.

• ORA-39083: Type as procact_schema cannot be created with the object error:

  Hello

  on 11.2.0.4 on Win 2008

  Impdp is over, but with the error:

  ORA-39083: Object type PROCACT_SCHEMA failed to create with error:

  All tables are imported.
  

  If I create just the PROCACT_SCHEMA would it be sufficient?

  I can't DDL script for PROCACT_SCHEMA using dbms_metadata.get_ddl ('USER')?

  
  

  
  

  
  

  Thank you

  Hello

  Check this blog refrence:

  Error: ORA-39083, DBMS_CUBE_EXP PLS-00201 while impdp in Oracle DB Server v11.2.0.4 | DBA blog

  I hope this helps.

  Kind regards

• Box of manages not lining up with the object due to different monitor resolution, suggestions?

  

  CC2014, when I was working on my 1920 x 1080 screen, I had to rocking out high-PPI display scale so that it works correctly. Now, in CC2015, which switch does nothing. The handles of the box are a mile from the object and will not line up, no matter what I try. It does not work correctly when the Illustrator is open on my 4 k monitor. However, the 4 k is my laptop screen, which is only 13 ", the 1920 is a 27"... so you can see why I prefer the larger screen, when I'm at home, haha.

  My guess is that the scaling high ppi currently does not work in CC2015.

  A similar experience? Suggestions?
  Any help is greatly appreciated. Thank you.

  CW,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  There are a few problems with the GPU and Adobe are working on them. they should be resolved with the 19.0.1 patch, that is I hope that this week.

  You can also move or adapt the work affected (a little) and then Ctrl / Cmd + Z to undo, to get it in place.

  This is a roundabout way of use before another problem is resolved. Returning to the CC 2014 will be also get rid of it, if that's the case.

• Handles missing in Illustrator with the object tool

  I use Illustrator CC (2014) and I'll shoot an object/shape (rectangle, circle, etc) and it will not give me the purpose of modification of the handles. This isn't the question command + h (tried) I still have the edge of the box and points. Also, when you have the black arrow selection tool and you attempt to catch him, it will not select the. It must be on the outline to move the frame. I have enough use and Illustrator that I usually find a way to solve problems like this but I have no time. I was not doing this yesterday.

  Update fixed once the update is released.

• FindByIP fails with «the object has already been deleteted...» »

  I use axis2c to access VM web services. I can successfully recover a ServiceInstance a Login.

  I then try to find a virtual machine by sending the following text:

  " & lt; soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "& gt;" & lt; soapenv:body & gt; & lt; n: FindByIp xmlns:n = "urn: vim25" & gt; & lt; n: _this type = "Indexderecherche" & gt; FindByIp & lt; / n: _this & gt; & lt; n: ip & gt; 10.177.8.157 & lt; / n: ip & gt; & lt; n: vmSearch & gt; true & lt; / n: vmSearch & gt; & lt; / n: FindByIp & gt; & lt; / soapenv:Body & gt; & lt; / soapenv:Envelope & gt;

  I always get the error:

  & lt;? XML version = "1.0" encoding = "UTF-8"? & gt;

  " & lt; soapenv:Envelope xmlns:soapenc = ' http://schemas.xmlsoap.org/SOAP/encoding/ "

  ' xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "

  " container = ' http://www.w3.org/2001/XMLSchema "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "& gt; .

  & lt; soapenv:body & gt;

  & lt; soapenv:fault & gt; & lt; faultcode & gt; ServerFaultCode & lt; / faultcode & gt; & lt; faultstring & gt; The object has already been disposed or was not completely created & lt; / faultstring & gt; & lt; retail & gt; & lt; ManagedObjectNotFoundFault xmlns = "urn: vim25" xsi: type = "ManagedObjectNotFound" & gt; & lt; type obj = "Indexderecherche" & gt; FindByIp & lt; / obj & gt; & lt; / ManagedObjectNotFoundFault & gt; & lt; / detail & gt; & lt; / soapenv:Fault & gt;

  & lt; / soapenv:Body & gt;

  & lt; / soapenv:Envelope & gt;

  Note that I can use the browser MOB with IP address successfully, as shown below.

  Managed object type: ManagedObjectReference:SearchIndex ID of the object managed: Indexderecherche Method: FindByIp

  ManagedObjectReference:ManagedEntity FindByIp

  Parameters

  Name	Type	Value
  Data center (optional)	ManagedObjectReference:Datacenter
  ip (required)	string
  vmSearch (required)	Boolean

  Result of Invocation of method: ManagedObjectReference

  Name	Type	Value
  name	string	'Return value '.
  Val

  ManagedObjectReference:VirtualMachine

  VM-966\

  Any help is appreciated!

  Petwe

  Something wrong in your SOAP request. The 'object' mentioned in the fault Declaration does NOT mean the subject of the virtual machine that you are trying to perform a search by IP, but the object of the SerachIndex with which the FindByIp() method is defined.

  < n: _this type = "Indexderecherche" > FindByIp < / n: _this >

  should be

  < n: _this type = "Indexderecherche" > Indexderecherche < / n: _this >

  I'm not very sure if the value of the second Indexderecherche, maybe it's 'Indexderecherche', but you can check with the CROWD.

  The "FindByIp" must be earlier to < n: _this.

  In addition, I don't have a "n" before namespace. How do you have it?

  Steve JIN

  Author of VMware VI and vSphere SDK (Prentice Hall)

  Creator of open source (VI) vSphere Java API(tutorial, testimonials, download, samples)

  Blog: DoubleCloud.ORG ( Top 10 best practices, [common mistakes | http://www.doublecloud.org/2010/01/31/Common-Mistakes-using-VMware-VI-and-vSphere-SDK/], Tiny REST API)

  http://www.Twitter.com/sjin2008

• Encompassing not aligned with the object

  Hi all

  I've been using Illustrator CS6 and during the transition to the 2015.3 CC I had the following problem: when I create an object, it's bounding box does not align, it is impossible to turn the object easily. I suspected, I just pressed accidentally a few keyboard shortcuts, but reset settings and even move the file didn't help. I looked all over the forums, but it seems that only a few people experience the same problem, and their questions remain unanswered I will be very grateful for any advice how to solve this problem, because I come to CS6 because of this problem. Thank you very much!

  

  Object > shape > expand shape

  Context menu click object > transform > reset Bounding box

• Where I'm going wrong with the object Type

  Hello world
  I am trying to insert data into a table using a type of object
  Here is my code
  Please help me where I'm wrong...
  Thank you
  
  Code for the object. Type

  create or replace type emp_rec_type as object 
  ( empno number
   ,name varchar2(20)
   ,salary number(7,2)
   ,job varchar2(10)
   ,hiredate date
   ,commno number(7,2)
   ,deptno number(4));
   

  Now I want to insert data into the table like this

  begin
    insert into emp5 values(emp_rec_type(5,'jack',1000,'salesman','12-apr-2000',300.00,20));
  end;

  I don't want to create a variable of the object... Initialization type I want to create just to insert the value using the default constructor.
  
  Concerning
  Prost

  You can create the table of the object:

  create table emp5 of emp_rec_type;
  

  Kind regards
  Sayan M.

• transformation not aligned with the object box

  Hi all

  This problem has been bothering me for a while, and especially now that I am design - small - buttons.

  The processing area control an object (here a simple rectangle) does not exactly match the object itself, as shown on the screenshot.

  

  NB: The problem seems to be the option "match race":

  The loading IS included in the dimensions of the objects. (I need to choose this option)

  Same problem when the stroke is excluded from dimensions.

  The problem does NOT occur when the accident stroke is ' outside half / half in.

  I'm using CS5

  No applied clipping mask.

  Is there a way to fix the bug?

  Otherwise I'll find a way around it and 'cheat' by using the default option.

  KatDeskat,

  The snap to grid of pixels can be disabled in the transformation Panel.

• Problems with the objects from the library to a Flash document

  Hello

  I have a question about a library would be created within a

  Flash document. I have a lot of pieces of graphic objects

  inside a library for a FLA file.

  I then drag those songs on stage to build a complex more

  object. I then select all the pieces and group them and

  convert a video clip of this new object.

  Place it I move in the library of the FLA file.

  I noticed there are two a graph for this object and the

  video clip for this object. For me, these are 2 separate

  objects. So, when I delete the object graph,.

  It also deletes the clip that I created of the object.

  No one knows why this happens?

  Thank you

  Jim

  This is because the 9 symbol using the symbol 8.  IE, when you created the symbol 9, symbol 8 was on stage.

  to remedy this, go to the chronology of the coast of 8, copy the graphics, remove symbol 8, go to symbol of 9 timeline and paste.

• How to run a procedure with the object as OUTPUT parameter

  Hello
  
  I have a procedure and it composed of 2 parameters, there is an input parameter and it's some ID (NUMBER datatype) and 2nd parameter is an output parameter and it an object type. I want to run this procedure, but not able to do the same thing. Can someone please suggest me how to run a procedure that got the object as output parameter.
  
  Thank you very much in advance for your support.

  Example:

  SQL> create or replace type t_obj as object (ename varchar2(10), deptno number);
    2  /
  
  Type created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create or replace procedure myproc (p_empno in number, obj out t_obj) is
    2  begin
    3    select t_obj(ename, deptno)
    4    into obj
    5    from emp
    6    where empno = p_empno;
    7* end;
  SQL> /
  
  Procedure created.
  
  SQL> set serverout on
  SQL> declare
    2    v_obj t_obj;
    3  begin
    4    myproc(7788, v_obj);
    5    dbms_output.put_line(v_obj.ename||','||v_obj.deptno);
    6  end;
    7  /
  SCOTT,20
  
  PL/SQL procedure successfully completed.
  

• Impossible to cut and paste with the mouse right button

  I can't copy / paste with my right mouse button. When I click the right mouse button, nothing happens.

  Hello davi55,

  ·         Is - what the right click does not work with Windows Explorer or other applications such as text processors or Internet Explorer?

  ·         Did you install all the applications recently on your computer that might have caused this problem?

  ·         What kind of mouse you are using on your computer?

  ·         Are you able to cut dough using the keyboard?

  You can follow the link below and follow the steps proposed by MalkeleahMVP contextual talks about removing third party menus when right click does not work:

  http://social.answers.Microsoft.com/forums/en/w7repair/thread/ca3eddaf-3fcb-4878-8816-0e9b041fe0be

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Run the application with the admin rights

  Hello

  I am a network administrator and I have problems with an external application. While running the application does not require local administrator rights, the software does an automatic updates check when it is launched. There are updates once a week. If the application is launched without administrator rights, the software does not check. Our users do not have local administrator rights. The result is that the application gets overwhelmed and an administrator needs to log in order to to refresh.

  Here are the solutions I've tried so far:

  1. I ran the application using the command runas , which works, but is not practical as an administrator will have to provide the password every time.

  2. change the compatibility of the application to 'RUN as administrator'. I have disabled UAC to make this work, but the user must always supply a password. I could create a locked user who cannot log on to any machine, etc, etc, but this seems like a stupid solution. I might as well give all admin rights.

  3 to research more, I tried to use RunAsSpc (http://www.robotronic.de/runasspcEn.html). This seems to work well and did exactly what I'm looking for, but created two issues: no drives mapped and an access violation when printing that I won't have to worry about troubleshooting.

  I had to give all users local administrator rights until I have a solution. Is it possible to allow the application to do its updates without granting full administrator rights to the entire system? Any recommendations?

  Yes, let the program provider to build their program cleverly.  It is not going to be a solution to this.

  Otherwise, you will need to just have someone who has admin rights not login once a week and install the necessary updates.  A bit like Microsoft Office Update (requires an administrator to do so).