Put CS4 on the new laptop after other stolen

Similar Questions

• problem installing cs4 on the new laptop to windows 8

  Hi I have bought a new laptop after my old one stopped working. I tried to install cs4 on it. It runs as if it's installing application serial number its ok. It is said he was succeeded and when I hit near there a window that says error contact customer. I'm trying to find the icon cs4 on my laptop but it is not installed. can someone help please...

  install using compatibility mode (xp sp3 or vista).

• CS4 programs transferred to the new laptop

  The laptop on that initially charged Suite CS4 dead. Bought a new laptop at Micro Center. They transferred programs and data in the new laptop. I tried to use Photoshop and DreamWeaver, but get the error code 147,20.

  Micro Center told to contact Adobe.

  I bought CS4 Suite while studying at JCCC 5 years. What do need me to get the program to work on my laptop replacement?

  You must install the software, transfer does not work well.  You will need the serial number of your purchase to activate the software after installation.  You need floppies installation of your purchase, in order to install, and if you don't have the disks, then you can download the trial through the page linked below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  You may have disabled original activation, especially the case if you had it installed on more than one machine.  To do that you must contact Adobe technical support directly through chat or by phone.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• I have photoshop cs3 on my old laptop - need to put it on the new - was a gift from a business associate - do not have box with me - last need to load on the new laptop series 3

  I have photoshop cs3 on my old laptop - need to put it on the new - was a gift from a business associate - do not have box with me - last need to load on the new laptop series 3 @!

  Hi Talia Casey,

  Please visit the link below to find the serial number and download link:

  https://helpx.Adobe.com/x-productkb/global/find-your-serial-number.html

  https://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  Concerning

  Sarika

• Why does he move not CS4 (disks or download) on the new Windows 7 or Windows 8? I have unsuccessfully faced with tent to install my version of CS4 on a new computer, after the failure of our old one...

  I have suffered in vain trying to install my version of CS4 on a new computer after our old failed... always installs modules and peripheral software but fails to install PhotoShop, Illustrator, InDesign,... in short: something useful.

  Hello
  It's very strange. You see an error message? The installation fails right or what's happening? Can you be more specific please then I will try to help you with this one?

  Thank you
  Martin

• CS4/5 installation on the new laptop without disc?

  I'm picking up a new laptop PC, this afternoon and I plan on disable and remove my old laptop for CS5. I have CS4 originial records, registered, and the disks to upgrade to CS5 (the two Design Premium, if this allows everything), but the new laptop doesn't have a hard drive. What is the best way to install CS on the new laptop computer?

  In addition, I should start by installing CS4 and follow the update? I don't remember exactly what, but I remember running on some issues when I did it first about 3 years ago (and have had error messages resulting from so I want to avoid on the new computer).

  Thanks in advance.

  No, you just install cs5.  you will be prompted for the serial numbers of your cs4 and cs5 upgrade.

  If you follow the 7 steps, you can dl a trial through one of the links on this page: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem with dl, you don't follow all 7 steps.  as a general rule, do not carefully follow the steps 1, 2 or 3 is the problem.

• Install Web Premium CS4 Student Edition on laptop after the Question upgrade Windows 7

  I hope that this has not been asked before, but my question is this: I want to upgrade my laptop Windows XP to Windows 7.  But I've heard that all programs be uninstalled after installing Windows 7 on a computer running Windows XP.  I have to reinstall all the programs again to use CS4 Web Premium.  But my student edition says that I can only install the program on two computers.  Does that mean I can install the program twice, or can I still install on the same laptop after changing the operating system (I installed CS4 on both computers, my computer, laptop and desktop)?  I want to continue using CS4 Web Premium on my laptop but I'm worried I won't be able to install it because I installed CS4 on my laptop and desktop (two installed already).  I would like to know if I can install on the same laptop after upgrading to Windows 7.  Thanks in advance for the help.

  WebMacro123

  The question isn't installation... it's activation. Disable the software first. (Help > deactivate from any application).

  Back up all your data, preferences, etc. because, as you note, it will be a clean install of Windows. Know that it is only cool method to upgrade a Windows installation. NEVER don't upgrade a Windows in place (or, IMO, Mac OSX).

  Bob

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Download cs5 on the new laptop

  I bought cs4 through a store educational onlinie for my imac. I upgraded to cs5 via the adobe Web site. I am trying to download the cd for cs4 on my new laptop, but it is not let him. Can just download the upgrade that I bought online in my laptop?

  Thanks, Victoria

  You can just install the update on your laptop CS5 without having to install CS4. During installation that you put in the serial number of CS5 it will will ask you for a serial number of your eligible upgrade version please see the screens.

• connection printer to the new laptop

  My printer is connected to the wireless network, but I try and put it on my new laptop (windows 7), that it says cannot find every time. I checked that all on the same network and they is, firewall off as well - so frustrating

  How to connect existing printer for the new laptop?

  I'm sorry you have a problem with the communication of the printer and the computer.

  Try disabling your anti-virus.

  In addition, run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know what happens.

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• Old laptop will not come to the top. To get the files and documents for the new laptop

  My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop? Can I do this using a USB Flash drive? Thank you

  Saturday, January 22, 2011 18:39:30 + 0000, ashevilletom wrote:

  My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop?

  I do not know. The answer depends on what's wrong with the old.

  Can I do this using a USB Flash drive?

  # If you can not start the old laptop, you cannot transfer files from it
  to the USB.

  If the problem with the old laptop isn't that hard drive has
  has failed (and that's a big 'if'), you can pull the hard drive.
  and get an external USB enclosure. Having done this, you can read
  It is on the new laptop and copy files from it.

  Ken Blake (MS-MVP)

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I install Windows 7 product key on office and reinstall it on the new laptop when it arrives?

  Hello everyone, I had to order a laptop for school. But it is still not there, so I had to install windows 7 and office 2010 on my old computer at home to do my school work. When my laptop is here, can I reinstall XP on my old computer and put my copy of windows 7 on the new laptop? Or is the product key now linked to my old computer?

  If you have purchased commercial versions, then you're OK.

  If you have bought OEM Windows 7 and activated, then the license is locked to the old PC (although you might try to discuss your case with MS)

• I need to disable a copy of my Lightroom 6.1.1 and reactivate the new laptop.

  I need to disable a copy of my Lightroom 6.1.1 and reactivate the new laptop. There is no 'activate' or the button 'disable' to the title assistance at registration (contrary to what is stated in the forums).

  The help section on the Adobe Web site made no reference to disabling Lightroom specifically, and the advice given for other products do not seem to apply.

  Can anyone help with a specific procedure to disable the product?

  Lightroom allows two facilities under a license. All what you need to do is uninstall Lightroom 6 and then install it on the new.