Put mouse button & Enter to behave
When I click the left button on my mouse, the page I'm trying (web or Excel VBE) Gets a double-click. I navigate with the Tab key or arrow to a selection of menu and click Enter and the selection runs twice.
This problem has been doing worse and worse over the last month, and now it happens between 95% and 100% of the time.
I restarted.
I tried to change the buttons of the mouse to the button right mouse would be main button, and it seemed to help for about 5 minutes, then he started again toward the top.
When I thought it was just the mouse, I tried the double-click speed, and it seemed to help for a while.
Does that in all programs or only one? Have you carefully looked at all the parameters of the mouse and
use your mouse third 3rd-party drivers?
--------------------------------------------------------------------------------------------------------------
Maybe a startup programs (including your antivirus/security programs) are the cause. Use
These verify.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
http://support.Microsoft.com/kb/929135
How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.html
Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Hello!
I am writing to report a problem I have with the new patch v35 and v35.0.1 Firefox address bar
With the new version 35 of Firefox on Mac OSX Yosemite, clicking with the right mouse button in the address bar to copy the web address, a context menu DO NOT allowed to copy the link, he shaded in grey, inactive... you click on an other browser zone before returning to click a second time and be able to copy the link in the context menu
I mean, with the first right click on the menu bar that appears to address do not allow me to copy the link directly, you must click another area and then click again with the right mouse button in the address bar to copy the Internet address (happens to all pages)
I tried to open Firefox plugins and completed inactive and reset Firefox on first use (as the first installation) and the problem is here again... The problem with or without add-ins and plugins is here
What happens before and then when I format my computer
Here I put a screenshot that explains the problem better than my words
http://i.imgur.com/QxKd8P1.gifI hope you can help me
Hello
I want to just inform you that with the new version 36 of Firefox, this problem has been corrected in my browser
Now I can access the copy option in the context menu directly in the address bar
Thanks for the replies -
How can I speed up my middle mouse button scrolling?
When I try to scroll down using the middle mouse button, it goes so slow I can't, so I use the scroll bar to the right. It's embarrassing for me. When I reset the button of the mouse on my windows to multiple lines, it allows to scroll too fast for my docs, but does not affect the scrolling in FireFox. I have looked for tools and options for this and cannot find anything to do about it.
You can try to change one (or two) of these hidden parameters:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the wheel and take a break while the list is filtered
(3A) double-click the preference mousewheel.default.delta_multiplier_y and type a higher value to each movement of the wheel to cover more ground. For example, you can try 300 or 500. You can keep this tab open and to experiment with scrolling in a different tab until you find a value that gives you the speed you are looking for.
(3B) double-click the preference mousewheel.system_scroll_override_on_root_content.vertical.factor and type a higher value. For example, try changing from 200 to 500. You can keep this tab open and to experiment with scrolling in a different tab until you find a value that gives you the speed you are looking for.
I'm not sure I understand the reason why there are two such similar tariff preferences. One of them do you want?
-
Satellite P750-136 - left mouse button does not work
I don't understand what the problem is. My left mouse button does not work. If I put a little pressure on the Panel located under the button space then the left button of the mouse works.
What should I do? It feels like a hardware problem, since I bought the laptop in November my laptop is still covered by the warranty.
What you can do is to check the touchpad settings and make sure that everything is OK.
I'm don't know if you noticed this since day 1, but if you think it is hardware problem I recommend you contact the nearest Toshiba service provider as soon as possible. Warranty will cover all repair costs. -
Satellite L650 - left mouse button starts to unravel
I have some problems with my left mouse buttons on my Toshiba Satellite L650 - 1 6.
Sometimes it doesn't work and I don't know what to do.What should I do?
Contact the nearest service Toshiba and ask for help. If there is hardware problem, it should be replaced.
I put t know what else you can do about it.
The warranty is still valid? -
Satellite L40 'pass' without pushing the button enter
My daughter had a computer failure with its Satellite L40 and I had to reinstall windows with the additions of the disk (s?) of product recovery.
Curiously, there are two discs, no. 1 and no. 2, but installation is complete without use of DVD nr. 2.
But after re-installation, I have the following problem: fine on Windows startup, everything works, but when I move the cursor with the mouse and it crosses a hyperlink, it in time (not all the time) opens the link as if I had used the button enter or the left button of the mouse. This makes working with the laptop barely possible.
Does anyone know what causes this problem and how it can be fixed?
Thank you!
Arend
(Netherlands)Hello
Please check follow her. Press the WIN + E key combination to open Windows Explorer. Click TOOLS > folder options.
As a general rule, tab check the last option, called click items as follows. Make sure that the option to double click... is chosen.Yet something in the mouse properties check the sensitivity of the mouse. May is set to touch light. Play around with these options.
-
Mouse buttons go at the time of publishing
Is there a way we could take advantage of these additional mouse buttons when you change the code in LabVIEW?
I think undo - redo perhaps, anyone knows how we can adjust LabVIEW or Windows?
See you soon,.
I have not fully committed to use it, but I think that X-Mouse button control can do what you want.
https://www.highrez.co.uk/downloads/xmousebuttoncontrol.htm
With her, I was able to implement a rule that when the 'LabVIEW.exe' application is active, to make the middle mouse button simulate pressing CTRL + space to open the quick menu. The Middle click has not been used for anything anyway. Also, I have set up my buttons previous and next to scroll left and right, but I do only rarely that I think I can try to do something else with it. You can put up to a cancellation and again (as long as you make a key CTRL + SHIFT + Z for redo) If you think you might like that.
Honestly, the hardest thing for me is to determine what I want these additional functions to do. Undo redo is not bad but my left hand is on the keys to my house most of the time anyway, I sorta want it to do things that are normally more efforts.
EDIT: A logic agree but not very hard to do now, is I mapped my back and forward for CTRL + wheel. Does that mean it is when I'm in a case structure or structure of the event, by pressing back and moves forward to the previous case or in a structure of multiple cases.
-
Execute while the left mouse button is pressed
Hi all.
I'm a super newb to Labview, but not to programming (who for years, C++ etc...)
I have a project that I'm trying to do that I hope someone can point me to some tutorials or something.
The idea is that I want to be able to press the left button of the mouse and a dial start to turn. It will then stop when I release the mouse button. I intend to put a "indiator" randomly around the dial where the user must stop, but not until they start by pressing the button.
Attached, this is my code so far. Very basic for some experts like you guys, but it's my first try at Labview.
Thank you.
Greg
Here is a 2011 version. I have not opened to see if any functionality has been lost.
-
The mouse buttons are not switched
Whenever I restart my computer I have to reset the default right back to my left hand favorite mouse buttons. This has happened after that I upgraded my mouse driver. Revert to a previous version did not remove the problem.
Schoonerman salvation,
· Who is the manufacturer of the mouse you are using?
· Is there any type of installed software that came with the mouse?
Sometimes software and windows will be conflict and this automatically resets the settings of Windows after restart.
Do the steps below should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.
a. Click Start, type msconfig in the Run dialog box and press ENTER.
b. If you are prompted for an administrator password or a confirmation, type your password or click on continue
c. in the System Configuration dialog box, click the Startup tab
d. look for all named KHALMNPR entries or similar and uncheck the box next to them (there may only be a)
e. click OK and restart your computer
f. after the restart, change the speed of your mouse pointer and reboot
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
No KeyPress triggered if the mouse button is held on the control
Hi all
I am trying to catch the outfit/auto repeating keyboard inputs at the same time I'm clicking on a slide ring switch, to change the direction of the slide of entry as a Shift key. (actually, I would like to use the SHIFT key, but apparently not raise events keypress at any time, so I resorted to letter keys). I check for the KeyPress in the recall of Panel, it fires well if no mouse btns are in a hurry, or if they are pressed on indicator or decorations on the Panel. But as soon as I click on any control with an active entry, all keypress events stop until the mouse button is up, then keypress starts shooting again, completely defeat the purpose of simultaneous inputs. I put the test code in the callback of slide control, and it does not receive the keypress events or if the mouse button is pressed, if it does if it has focus, but the mouse button is up.
Any ideas? I'm still using ver 6.0 if it makes a difference, try to get it to improve myself to 8.0 but try to do something on the old version, while I wait.
Ken
I didn't understand exactly what Ken was referring to. Let's try another approach: a reminder of command triggers a LEFT_CLICK or COMMIT event even it the SHIFT key is pressed, to Ken can intercept the desired event and then test the State of the keyboard, in this way:
If (event == EVENT_LEFT_CLICK) {}
GetGlobalMouseState (NULL, NULL, NULL, NULL, NULL, &keys);)
If (keys & VAL_SHIFT_MODIFIER) {}
MessagePopup ('Event', "shift key is pressed.");}
} -
Cannot change left/right mouse buttons.
There is no tab in the properties of the mouse buttons. Some time in all of the recent "improvements" that gave me a center mouse & keyboard, the button tab disappeared from the properties of the mouse. I have reviewed each tab, and there is no option to switch left/right button. I click the mouse & keyboard Centre, but it's just a center of the keyboard. No the mouse settings. I tried to change the registry option in the parameters of keyboard keys mouse left/right switch (from 0 to 1), but it has not changed anything and switched back to 0 when I restarted the computer. The tabs in the properties of the mouse cpl are Options of the pointer, wheel, material, activities, Touchpad, mouse & keyboard Centre of Dell and pointers. No tab buttons, zero, not zero.
Fixed a problem. The registry key seems to have finally saved after the last charge, and now the mouse buttons are gone. I put the following registry key from 0 to 1.
Computer\HKEY_CURRENT_USER\ControlPanel\Mouse\SwapMouseButtonsIs no longer, I worry that there is just no tab buttons mouse corporal my work me has with a Logitech mouse that the manufacturer doesn't ' t even appear to support with the drivers, so I ordered a new mouse for a future use of the store business. Thank you. -
mouse buttons act as touch pad
Pavilion DM1 - 3245CA Windows7 64 bit.
Right out of the box, I found the touchpad to be extremely frustrating that the delimited areas as 'right' and 'left' mouse click the points are just as sensitive to the touch as the touchpad itself. The area of the mouse button can be used as the Tablet! Therefore, when you touch the area to the right or left click on the mouse often jumps to a new location, which sometimes causes other "destination".
When I followed the instructions on the web site to modify the sensitivity of the touchpad or mouse button areas, the screens I see are different to those indicated for this machine and driver downloads for the touch pad indicates that I have the drivers.
From my point of view, it is a flaw that makes it almost impossible using this computer without using a USB mouse.
Boring, so you know what.
Figured it out on my dm1z
Go to mouse properties in Control Panel and then device settings tab, and then click settings
Under scrolling of the matches of the Palm check...
Drag on the gear icon and click on it, it should open a configuration window
I put the activation time filter 0
then I check the two boxes of restriction
then I move the mouse over the black central square at the bottom of the starting area, and then drag upward a bit take outside the touchpad buttons. Press close and OK endangered.
crazyiest touchpad I've ever seen, I still have problems moving the slider even with this setting.
Let me know if find you the best settings
.
.
-
Original title: Kensington Trackballworks sometimes has several icons in the system tray
Every so often from the start (no apparent reason) multiple Kensington TrackallWorks icons appear in the system tray and the unit behaves erratically until all but one of them are closed. Behavior exhibited, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected. I use a Kensington Expert Mouse and TrackballWorks 1.04 K64325 model number. Uninstall and reinstall the driver didn't help, or does uninstalling and reinstalling Windows.
I checked with MSCONFIG, Autoruns and even when several copies work they show only one entry for the application. Any ideas /.Hello
Since you've already tried to uninstall and reinstall the driver/windows, this could be a hardware problem. Please try to contact the manufacturer of the mouse for assistance on this issue.http://us.Kensington.com/HTML/1458.html (you can select the Technical Support of this link and then select Product Knowledge Base)
http://us.Kensington.com/HTML/1445.html -
can we put a button on the canvas of the battery
Hello
can we put a button on the canvas of the battery
and if we write hide_view it works?
Please guide
VikasVikas,
We can put the button on stacked canvas, and if you want to use HIDE_VIEW the canvas stacked in this button, then you must first move the cursor to another element that belongs to another canvas.
OR
You must set the properties navigable mouse and keyboard navigable of the button to FALSE.If this isn't what you want then please explain what you actually want to achieve.
Kind regards
Manu.
If my answer or the answer to another person has been useful or appropriate, please mark accordingly
-
How to put the button submit as Checked
Hello
I need to adjust my login button submit as Checked. for the HTML input tag we have checked attribute, but in our jspx for command button how to put this button that checked.
Someone can help me.you mean enter button don't call action?
Move your af:form from the top of the jsf to your input fields all about; defaultCommand here is your id of the button.
Maybe you are looking for
-
My computer keeps asking me to sign in iCloud, even if I am logged in.
All of a sudden my Mac I sign in iCloud, wanting more even if I am logged in. I can't access my email to iCloud because of this. What would cause this? I tried to sign in iCloud, signing then. I restarted the computer, still the same issue.
-
I wanted to upgrade to iOS 9 so I do it, and he beat by error 53
Hello my name is s. mohsen and I'm from the Iran. Unfortunately, apple doesn't have any support in my country, but we love Apple products and use them. A few months ago, I bought an iPhone from a guy that I him no more after a few days I wanted to up
-
ProBook 4530 s do not Fine DVD... This is life showig blank disc
my hp probook 4530 problem sand my dvd player plays DVDs or burnI use windows 8Please help me It does not work...
-
My screen keeps freezing same mouse and I have to close my computer and start in safe mode
Original title: screen freezing same mouse helps getting more frequent Hi all my screen keeps freezing same mouse and I have to close my computer and start in safe mode, I have windows vista. its most frequent doing, I tried to look at the error logs
-
How to burn a MP3 cd in Windows Media Player?
I want to burn a cd in MP-3 format using windows media player