Put on wireless internet access for laptop 4510

Similar Questions

• Internet access for laptop Dell Mini 10

  I bought a Dell Mini 10 recently it has worked well up until 18/08/12 and then I could not communicate with the Internet, the company told me to return it for an Exchange, I removed the programs I had installed and also I found a program that had been downloaded auto, Microsoft Net, as soon as I removed this program I could access the Internet without any problem. Anyone else having this problem?

  I understand, there was a recent update for the McAfee antivirus program that has paralyzed the ability to access the Internet.  If you use McAfee antivirus, you must visit their website and follow their advice.

  Normally, you do not want to remove any .net software, but it seems that in your case you lucky.  Detached may cause other applications a malfunction however.

  Good luck.

• I need to edit PDFs to stand alone (no internet access) to laptop.

  I need to edit PDFs to stand alone (no internet access) for laptop with Windows 7 Pro. Is the appropriate product of Adobe Acrobat DC for me?

  Yes.

  If only, you will have access to the internet during installation, you will need to purchase acrobat dc, Plans and prices | Adobe Acrobat DC

  If you will be able to connect to internet during installation, and at least once a month, you can buy a subscription form usage.

• Error "Cannot display Web page" when the wireless internet access.

  Original title: dubious connection

  seriously, my internet connection Wireless plays up.

  It works fine on my laptop, but on my desktop it will work well for maybe a few minutes and then all of a sudden that take forever to load pages or just say 'cannot display Web page' and that will be the end of it. Also says that I'm connected to the internet and internet access. I have done all troubleshooting, clean boot, disable the antivirus/firewall, reset tcp/ip stack, network troubleshooting, nothing is. It works for two minutes then boom, slow as a snail and then not working. If I disconnect my wireless network and reconnect it seems working again for a few minutes then slow again. Very frustrating, any advice appreciated

  This has only started happening last week?  You have McAfee on your desktop PC?

  If so,.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool, they mention a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - -

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• I'm not able to get wireless internet access after entering my security at the back of my modem key.

  I recently bought a thread to get a wireless connection after you plug the usb driver proceeded to create a connectin wireless, then asked to type in the security encrypted code that did got a connection but said auto and not Internet, but bars are high and shows a connection, I hope that I have been specific with the problem iam having.another thing on my laptop I have access to the internet and typed in the security key on the back of my modem... Tenda is the name of the usb driver.

  original title: no internet access

  Hello

  Are you binder to share internet from your laptop or your internet provider cable is connected to this wireless USB dongle / device?

  If you share internet by connecting this USB to a computer, you will need to share internet on this computer.

  You must enable "Internet connection sharing", click on Start menu-> network connections-> right click on the connection to the LAN-> select properties-> click on the tab 'Advanced'-> Tickmark 'allow other users to connect through this connection to computers.

  I hope this helps.

• HP 2000 2D70DX Wireless Internet driver for windows 7 Ultimate 64-bit

  Hello

  I've demoted Windows Ultimate 8.1 to 7.

  Although, I just can't find an internet driver for my laptop model. I know there is one. I saw HP experts provide drivers to other people on the forum so that they have downgraded as well as me. Thank you!

  In Device Manager, shows it when I right click and go to details and hardware ID

  Driver for windows 8.1 (Just need one for windows 7)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131396-1&cc=us&DLC=en&LC=en...

  Finally got it works from this site that supports my hardware ID

  http://service.smartpcupdate.com/downloads/toshiba_n7fdd75715d34.zip?from_site=1

  Thank you very much for your help Wakamoles! I if happy there are people like you who are willing to help those in need, thank you!

• No internet access for the connection with the router.

  I bought a router D-Link DSL-2750U and when I connect to the internet it says no internet access even I've updated the MAC address of my router with my ISP, but still no use I use don't win 7. any help on this?

  Hi Chavigny,

  In case you have contacted the ISP provider and verify that the network settings are correct, then try the following steps:

  Method 1:

  I suggest to run the network troubleshooter, and check to see if it lists all the errors and helps you solve them.
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Update the network driver.

  Steps to update of network driver:

  (a) click the Start button.

  (b) in the search box type devmgmt.msc, and then press ENTER.

  (c) select the network card device and right click on it

  (d) now select Properties.

  (e) in the Properties window, on the driver tab, click Update driver.
  After installing the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Please refer to:

  Why can't I connect to the Internet?

  Previous post: the State of the question.

• Internet access for virtual machines in Lab Manager

  Hello

  Our lab environment is configured separately from corporate network and only some public IPs are able to access the internet. How I would install machinery in the Director of the laboratory to access the internet?

  For example, IP range - 64.x.x.x. Creation of a network model with these IP addresses attached to physical networks and external public would give me access to the internet?

  Stan,

  You would have to create a physical network that is attached to a vSwitch or Distributed Switch that can connect to this network of 64.x.x.x.

  If configure you a Pool of IP, Lab Manager can manage physical network IP assignments to the virtual machines.  so if the virtual machines require Internet access, then they will need to access this network (somehow).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Internet access for PDF Question

  Hello

  I was using IE until an auto update last week. I am now using Firefox. I have a business site I go to full report 'missions '. When I click on the task, it should open the report in the same page. It now opens the report in a new window PDF. I can fill in the report, but when I click 'submit', it's not the case. Save the report and e-mail are not an option because it must be submitted through the system. I have repaired, checked for updates and uninstalled/re-installed adobe reader 11 as well as updated adobe flash. The transition from IE to Firefox was recommended by the support of the company's website. Chrome/Safari are not available options. I've 'activated' module additional adobe in Firefox and allowed access to all sites in the preferences of Adobe. Any suggestions on how to "allow internet access" from the adobe site would be appreciated... Thank you

  WATSON wrote:

  I just changed the tabs of three acrobat adobe applications 'use adobe acrobat (in firefox)' to 'use adobe reader' (default).

  Is it not that which is causing the problem - the PDF does not open in Firefox, but in a separate player window?

• My HP Pavilion laptop g6 will not connect to any wireless internet access

  I have dealt with this for a while now, and it just happened to no part I turned on my computer one morning and it would not connect to my wifi. I've tried EVERYTHING. My computer allows me to plug in an ethernet cable and the router and use the internet like that. I know it's not the router because I use the internet on my iPhone and tablet. When I try to connect to the internet, it has a red X where the wireless icon used to be, now the icon looks like a computer instead monitor the small bars. When I type my button wireless on my keyboard, a message appears and warns me that I just got my wireless turned off, but no matter if it is off or on this little button always has the light on orange. I can't understand what is happening and I would appreciate if you could help me!

  Hi katherinehill12,

  It seems like there is something wrong with the Ralink card because of the question mark. Try installing the Adapter Ralink WiFi and let me know how it goes.

  Thank you

• C4580 install disables the XP firewall and internet access for 3 minutes at the start of the PC

  After installing C4580, when I turn on my Dell Inspiron C510m, XP tells me that the firewall is disabled, I can't access to the internet or even my router nor can I use the Applets in Control Panel that could help me sort these things. After 3 minutes, the Firewall WARNING disappears and everything is fine, but none of the updates antivirus and software update checks performed and I have to perform these tasks manually. The printer works fine, but it worries me that this behavior indicates a potential vulnerability - it's like something kept the door open to let the unpleasant things in the computer. Uninstall the HP software solves the problem, and he re - install it reminds me once again. There is something hanging in a HP driver at startup?

  PeterM

  I found the answer to this one, if anyone is interested, even if the solution required a work-around on the way. Suggested HP support I have just uninstall and install software downloaded from their site (PS_AIO_04_C4500_USW_Full_Win_enu_120_210.exe). This indeed solve, and another problem I had (see network & Wireless forum), but this download is missing the software package I.R.I.S. OCR, presumably for reasons associated with 3 rd-party lisensing. HP support insisted that this download was the OCR, but the OCR .exe is certainly missing. Workaround needed to go back and re - install the CD software, then uninstall everything except the OCR package (you can do), then install the downloaded version. My PC still takes too long to start, but it's probably the combined effect of each software package, I never installed wanting home phone so that it loads.

  PeterM

• Satellite L20-264: wireless Internet access does not work

  I have a US Robotics router and a wireless laptop, I followed the instructions exactly in the manual to set up but the internet still does not work wireless but it works through the ethernet connection.

  Can someone help me please.
  If it helps my laptop model is 264 L20
  Thank you

  It is a pity that you describe your problem WLAN so little time and we don t know what you tried exactly and what results are there.

  For properly WLAN use two hardware components must be configured right - the router itself and laptop. It will be interesting to know on what are the instructions you wrote.

  Are you sure that your router is configured correctly?

• WRTP54G router: I have wireless internet access, but is not a wired desktop computer.

  We have a great wireless network in the home, but my office (which is not wireless) is unable to access the internet.  It is said that a network cable is unplugged - it isn't.  When a cable is plugged into one of the 4 ports on the back of the router ethernet, ethernet LEDs located on the front doesn't light up or blink or anything.  I think that the part does not work.  Is there something I can do?  Should I update the firmware?  Or just get a new router?  I tried different cables, but nothing changes.  The only way for the office get online is to take the router configuration, but then the wireless network and the Vonage phone came out.

  I went to ipconfig at the prompt of commands and under the Ethernet connection to the Local network card: my media is media disconnected.  So, I'm guessing that the router's ethernet ports do not work.

  Thanks for your help.

  Make the continuos ping ping 192.168.1.1 t and check how many answers or RTO you will. If you still have some of the answers, connect your PC to the modem to get internet connection and download the latest firmware and utility upgrade for your router.

  FIRMWARE

  1. go to www.linksys.com/downloads

  2. Enter the model number of your router

  3. choose Get downloads

  4. Select the Version of the device

  5. check drivers and downloads, can download the Firmware

  UPGRADE UTILITY

  1. go to www.linksys.com/downloads

  2. Enter the model is BEFSR41

  3. choose Get downloads

  4. Select the Version of the device - Version 4.0

  5. check drivers and downloads, can download the utility

  After downloading these files.

  Connect your PC to the router, and then run the TFTP (Utlity) set Server = 192.168.1.1; Password = admin; then choose the firmware file that you downloaded. Then upgrade the firmware of your router.

  Note: Make sure that you set TCP/IP and DNS server you computer back to GET the IP ADDRESS.

  Note: To run the utility TFTP set TCP/IP and DNS server on your computer to USE THE FOLLOWING IP ADDREESS.

  Just follow the previous posts to do this. Good luck.

• Wireless internet access

  I have a wrtg54 wireless n g wireless access point. I have a problem with my laptop. I'm used to be able to get a free wifi. But now I can not get access to the internet, even though I can still pick up the signal. I am also pickin, a narrower signal which is overiding, wifi free signal - well that's what I think.

  It is can how to configure my routers to pick up free wifi without picking up the strongest signal of security is enabled.

  "Piggy backing" off someone elses network is illegal, even if they are stupid enough to not to ensure their equipment.  That said, if your WAP doesn't work anymore, it could be because of many reasons.  You must Access the main router to verify several parameters.

  Your WAP configuration must be exactly the same as the router - wireless, same same channel type security, same SSID.  The main router could use auto channel while fundamentally will make your useless WAP if the channels are not the same.  In addition, even if the network you want to connect is not secured, they may have allowed a MAC filter so that only certain MAC addresses can connect to it.  Or, because the router will identify systems all connected by MAC address, they may have picked up an "intruder" was connected and explicitly denied access of your MAC address.

  If the problem is simply that your computer is trying to connect to a signal stronger and not the network you want to connect to use network settings to manually select the network should be your main if choice avaialable.

• I can't connect to any wireless internet access

  My system is windows 7, before the internet was fine, I can go anywhere, but now I can't connect to any wireless network. I open the Panel of the network adapter, and I see only the local and other network connections, I downloaded (I downloaded them a long time ago, it has not affected my internet). Then I go to my friends computer and research and on any site that told me to look at the Device Manager. so I checked and under the map ISATAP and Teredo, there was a yellow exclamation point, and in the properties, it says "this device cannot start code 10." This has been a very serious problem, I can just keep borrowing my friend's pc, I really need help!

  Deng Hello,

  Thank you for the update on the issue.

  1. How did you try to start the computer in safe mode?

  Try to start in safe mode and check if the computer boots to the desktop

  See the article: start your computer in safe mode

  http://Windows.Microsoft.com/en-AU/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer starts in safe mode desktop, check in a clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Let us know the result, we will be happy to help you further.

  Thank you.