Wireless internet access

Similar Questions

• I'm not able to get wireless internet access after entering my security at the back of my modem key.

  I recently bought a thread to get a wireless connection after you plug the usb driver proceeded to create a connectin wireless, then asked to type in the security encrypted code that did got a connection but said auto and not Internet, but bars are high and shows a connection, I hope that I have been specific with the problem iam having.another thing on my laptop I have access to the internet and typed in the security key on the back of my modem... Tenda is the name of the usb driver.

  original title: no internet access

  Hello

  Are you binder to share internet from your laptop or your internet provider cable is connected to this wireless USB dongle / device?

  If you share internet by connecting this USB to a computer, you will need to share internet on this computer.

  You must enable "Internet connection sharing", click on Start menu-> network connections-> right click on the connection to the LAN-> select properties-> click on the tab 'Advanced'-> Tickmark 'allow other users to connect through this connection to computers.

  I hope this helps.

• Error "Cannot display Web page" when the wireless internet access.

  Original title: dubious connection

  seriously, my internet connection Wireless plays up.

  It works fine on my laptop, but on my desktop it will work well for maybe a few minutes and then all of a sudden that take forever to load pages or just say 'cannot display Web page' and that will be the end of it. Also says that I'm connected to the internet and internet access. I have done all troubleshooting, clean boot, disable the antivirus/firewall, reset tcp/ip stack, network troubleshooting, nothing is. It works for two minutes then boom, slow as a snail and then not working. If I disconnect my wireless network and reconnect it seems working again for a few minutes then slow again. Very frustrating, any advice appreciated

  This has only started happening last week?  You have McAfee on your desktop PC?

  If so,.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool, they mention a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - -

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• WRTP54G router: I have wireless internet access, but is not a wired desktop computer.

  We have a great wireless network in the home, but my office (which is not wireless) is unable to access the internet.  It is said that a network cable is unplugged - it isn't.  When a cable is plugged into one of the 4 ports on the back of the router ethernet, ethernet LEDs located on the front doesn't light up or blink or anything.  I think that the part does not work.  Is there something I can do?  Should I update the firmware?  Or just get a new router?  I tried different cables, but nothing changes.  The only way for the office get online is to take the router configuration, but then the wireless network and the Vonage phone came out.

  I went to ipconfig at the prompt of commands and under the Ethernet connection to the Local network card: my media is media disconnected.  So, I'm guessing that the router's ethernet ports do not work.

  Thanks for your help.

  Make the continuos ping ping 192.168.1.1 t and check how many answers or RTO you will. If you still have some of the answers, connect your PC to the modem to get internet connection and download the latest firmware and utility upgrade for your router.

  FIRMWARE

  1. go to www.linksys.com/downloads

  2. Enter the model number of your router

  3. choose Get downloads

  4. Select the Version of the device

  5. check drivers and downloads, can download the Firmware

  UPGRADE UTILITY

  1. go to www.linksys.com/downloads

  2. Enter the model is BEFSR41

  3. choose Get downloads

  4. Select the Version of the device - Version 4.0

  5. check drivers and downloads, can download the utility

  After downloading these files.

  Connect your PC to the router, and then run the TFTP (Utlity) set Server = 192.168.1.1; Password = admin; then choose the firmware file that you downloaded. Then upgrade the firmware of your router.

  Note: Make sure that you set TCP/IP and DNS server you computer back to GET the IP ADDRESS.

  Note: To run the utility TFTP set TCP/IP and DNS server on your computer to USE THE FOLLOWING IP ADDREESS.

  Just follow the previous posts to do this. Good luck.

• My HP Pavilion laptop g6 will not connect to any wireless internet access

  I have dealt with this for a while now, and it just happened to no part I turned on my computer one morning and it would not connect to my wifi. I've tried EVERYTHING. My computer allows me to plug in an ethernet cable and the router and use the internet like that. I know it's not the router because I use the internet on my iPhone and tablet. When I try to connect to the internet, it has a red X where the wireless icon used to be, now the icon looks like a computer instead monitor the small bars. When I type my button wireless on my keyboard, a message appears and warns me that I just got my wireless turned off, but no matter if it is off or on this little button always has the light on orange. I can't understand what is happening and I would appreciate if you could help me!

  Hi katherinehill12,

  It seems like there is something wrong with the Ralink card because of the question mark. Try installing the Adapter Ralink WiFi and let me know how it goes.

  Thank you

• Satellite L20-264: wireless Internet access does not work

  I have a US Robotics router and a wireless laptop, I followed the instructions exactly in the manual to set up but the internet still does not work wireless but it works through the ethernet connection.

  Can someone help me please.
  If it helps my laptop model is 264 L20
  Thank you

  It is a pity that you describe your problem WLAN so little time and we don t know what you tried exactly and what results are there.

  For properly WLAN use two hardware components must be configured right - the router itself and laptop. It will be interesting to know on what are the instructions you wrote.

  Are you sure that your router is configured correctly?

• Vs ethernet LAN wireless internet access

  On XP Pro SP3:
  1. I had dial-up internet and one ethernet LAN.
  2. I cancelled switched and installed a Netgear wireless adapter.
  3. now my LAN does not work (IP conflict I think).
  4. What does change?

  RTFM

  How to ask a question

  Tip: If you must use static IP addresses (for example, printers), make sure they are in the correct subnet.

• No wireless internet access

  Hello

  I have just formatted my Hp mini 110-3000ea 10.1 Netbook that has a wlan PPD-AR5B95 adapter, I could not access the internet before the format (with windows 7) & I still can't, now despite download the right drivers for the device.

  I installed windows 7 again, he recognizes Wifi adapters but the drivers are not installed, I have tried several times to UN-installing and then reinstall drivers, does not state

  If I enter the HP Desktop mode, the device can access internet, but when I boot on windows, no internet

  Any help would be appreciated

  Thank you

  Hello

  Download and install the following.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49598.exe

  Restart the machine and install the following drivers.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49541.exe

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49599.exe

  Good luck.

• I can't connect to any wireless internet access

  My system is windows 7, before the internet was fine, I can go anywhere, but now I can't connect to any wireless network. I open the Panel of the network adapter, and I see only the local and other network connections, I downloaded (I downloaded them a long time ago, it has not affected my internet). Then I go to my friends computer and research and on any site that told me to look at the Device Manager. so I checked and under the map ISATAP and Teredo, there was a yellow exclamation point, and in the properties, it says "this device cannot start code 10." This has been a very serious problem, I can just keep borrowing my friend's pc, I really need help!

  Deng Hello,

  Thank you for the update on the issue.

  1. How did you try to start the computer in safe mode?

  Try to start in safe mode and check if the computer boots to the desktop

  See the article: start your computer in safe mode

  http://Windows.Microsoft.com/en-AU/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer starts in safe mode desktop, check in a clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Let us know the result, we will be happy to help you further.

  Thank you.

• Put on wireless internet access for laptop 4510

  The wireless switch with LED indicator at the front left of the HP 4510 laptop seems motionless - probably broken and about 2 weeks of vices... Sigh... Any suggestions greatly appreciated!

  Figured it out!

  Must be that HP hired English majors at Stanford, but machines built in China, where the disconnection of the language: the switch in question is not a 'button' but a 'switch' to be dragged, no hurry.

  We did all the pressing in the world and connected here, had support cat, restored, uninstalled Wireless Assistant HP, as proposed elsewhere on this forum and more efforts for 2 hours before casually perfect machine was just the right light and saw that he was not at all a button but a Slide switch. To be slipped. No hurry.

  As black on a black background: known to be bad design.

  Hewlett was an engineer. Packard was an engineer. Correctly identify the names of the parts and fucntion was in their blood.

  Look at us now...

  Sad...

  Sigh...

• Lose the wireless internet connection when it is not active

  Hello
  I have an annoying problem. IM losing my connection wireless internet access after a few minutes is not active... Well not according to the 'doctor' program - it shows no signs of a problem.

  Looking at the 'LAN' icon, I see he's trying to connect when I ask, for example, an update on the current site, but simply not turn on the blue bar.

  The only cure to get online is to update the connection.

  What I'm doing wrong here?

  Thanks in advance... Jens

  Hello Jens

  Please check the option sign-out after x... on your router. The sign-out feature is used to disconnect the router from your ISP automatically when there is no activity for a certain period of time. For example, place a check mark next to this option and enter 5 in the minute field will cause the router to disconnect from the Internet after 5 minutes of no activity from the Internet. This option should be used if you pay for your Internet service by the minute.

  Good bye

• What version of windows is required to upgrade a desktop with Windows ME computer to use wireless internet?

  We have a 2000 Hp desktop computer? with windows ME and just recently had wireless internet access. The system is too obsolete to connect even with our router. Now, what version of Windows is necessary for us to spend to be able to connect?

  Unfortunately, a Windows ME operating system cannot be upgraded.  Its time to recycle that old computer and buy a new one with Windows 7 preinstalled.  Here are a few examples.

• Problems with wireless internet for laptop.

  Hi, my name is Thomas Yeo, staying in Malaysia. I am a student. I own a HP Pavilion notebook g4. Is the product name and number is HP Pavilion g4-1204tx. It runs Windows 7. It is still under warranty. Every time, when I use the internet, I discovered that wireless internet access will always be connection loss by itself. He'll get back when I just restart the computer. Even if I have wireless internet and the router, it will never get over. How can I deal with this type of problem?

  Hello:

  Here is the link to the latest Broadcom driver for the card your laptop Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• No internet access when you're connected to my wireless router

  I have a laptop Compaq Presario CQ62

  OS: Windows 7 64-bit,

  Processor: AMD V120 processor 2.20 GHz

  Network adapter: Broadcom 4313 802.11b/g/n and Microsoft Virtual WiFi Miniport

  A month ago, I was using internet and then it suddenly stopped working. I am connected to the wireless connection, but there is no Internet access. I tried to leave the network and joining, turn off the router for 5 minutes, but nothing seems to work. What can I do?

  Keiron Wilce

  Thanks for all the help guys, but it seems that my anti-virus just need to update that was made by another computer and do pass through a pen-drive. Once again thank you for all the help.

• found wireless local access device has no fa internet access

  Hello friends please help I have Sony model led tv KDL-32EX520 wifi ready I have brought a UWA BR100 for WIFI, IT DETECTS my wifi but it says:

  found wireless device
  local access failed
  Internet access failed

  Pls help me pls!

  Thank you for your post and welcome to the forums.

  Please click on the link and follow the troubleshooting steps:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32464