Similar Questions

• Why did the counter works in MAX, but not of Labview?

  Please help, I've been away from Labview for more than 3 months and I'm pretty rusty...

  Last year, I configured successfully NI9401 to measure the period (in seconds) by counting the rising edges of my sensor signal.  Since then, I bought a new PC and loaded all my software inside, including the Labview VI that has worked successfully on the old computer.

  I can see the digital signal using MAX and test for the NI9401 Panel, then, I know that my son and my TTL signal is OK, but nothing except the below error when I try to run the attached VI, happens...  How can I say this VI to search for the signal on channel 14 and MOD3/CTR0?

  Thank you. I'm sure it's a small adjustment... it worked well a few months ago... do not know what the problem is now.

  Thank you

  Dave

  OK, now.  Solved the problem. The vi is fine, but some fragile son have been identified... worked in MAX but not in vi.  Now that the connections have been tightened, it works for both.  Sorry for the inconvenience.

  Dave

• Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

  Original title:

  Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

  Hello

  1. are you able to communicate and share with other Bluetooth devices?

  2. what happens when you transfer files?

  3. do you get an error message?

  4 you did changes to the computer, before the show?

  Method 1:

  Connect the phone to another computer and check.

  Method 2:

  If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

  http://support.Huawei.com/support/

• Menu Widget provided with Muse shows some but not all my submenu items.

  Menu Widget provided with Muse shows some but not all my submenu items.

  Here is the site on catalyst: http://cgfnewsite.businesscatalyst.com/index.html

  The problem is in the submenu of the media/articles.  It only shows two and there are many others.  If you go to the page you can see all the links. I have the page hierarchy properly set up in the title of the page articles with titles.  I've even shortened to see if it works.

  Under the videos link all sub links appear.

  Any help would be appreciated.  I code a little, but I'm not very good.  So please be technically.

  Thank you!

  Go to outline view, click with the right button on a page "invisible" and

  (1) make sure, that under 'menu options' the point 'include the page with hypertext links' is enabled.

  (2) choose the option 'Page Properties' and check 'Page Properties/Options', the "Export Page" element is turned on.

• USB thermometer works in Hyperterminal & MAX, but not in my VI

  I have USB (Omega TJ - USB) thermometer.  I contacted with her success in Hyperterminal.  When I try with MAX, it usually starts working after the second attempt to read/write.  But even if I put the termchar 0xD and termchar_en to True, I still have to type my writing as 'C' back ' 20.2 c ' (20.2 C being the temperature) any idea why this happens?

  In addition, I go ahead and make my VI, very similar to that found in the labview tutorial - image shown here: http://zone.ni.com/cms/images/devzone/tut/a/e09bfd41228.gif I put it for baud: 38400, 8n1.  and I also write 'c', but I get the error 1073807339.  I tried to change the buffer without change in the results.

  I thought it would be a relatively simple task, but it seems that I am bad, or overlooking something simple.

  Hi Chknrckd,

  Also what could be the problem, is that the way hyperterminal sends characters (when you type words). LabVIEW will send a string at the same time, while that hyperterminal sends each character at a time.

  More information can be found here:

  Why Test panels MAX works my Instrument Serial in Hyperterminal but not in LabVIEW or VISA work?

  http://digital.NI.com/public.nsf/allkb/171D2D70CFB66E74862571390062D12B

  I hope this helps!

• Instrument to appear in MAX, but not in the executable file

  Hello

  I use two HP34401A make some measurements, and I transfer the program to a laptop with complete labview at your desktop with only the runtime engine.  Instruments made their appearance in the Office MAX, but when I run the executable, they cannot be detected.  I expect some suggestions on how to possibly resolve this problem.

  Thank you

  Not to mention that MAX, what other driver is installed and necessary? Did you install NI-VISA, NI GPIB? At a minimum, you should include NI-VISA in the installer that you built.

• window "save optimized as" save for web shows office but not good record

  In "where to", it displays the desktop, with the icon of a folder, and not the name of the folder in the image is in, as usual, if I cick on the pop down menu, {where field) at the bottom I'm indicating recent locations in gray, and the name of a folder that is located on the desktop, but not one in the picture is in. I want to keep the image in the same folder.

  I did save for the web without problem recently. I left the PS and shut down the computer, nothing

  PS cs3 10 0 1

  in the Save as window I have no problem

  There is another menu "drop-down" in the registration window. To the right of the name of the file (save as: field), if you click on this button, it will allow you to access a folder or a location on the hard drive to save.

  

• Reading to the MAX but not of LabVIEW

  Hello

  I have a very difficult problem to read four counters of a NI 9401. In MAX, they read very well but in LabVIEW, they read zero. I scoured the internet and discussion boards and can't find anything on it. Please forgive me if this is a simple thing to fix. IM attaching two png which shows where I read meters and a picture of my task. I know that the VI everything would work better but I'm not posting my project as a whole.  I fixed it where some of the forum posts I found said have it better. Any help would be great. If you need a certain thing just let me know.

  Kind regards

  caleb1993

  I create now these tasks in LV I always not to read. I hope someone has assured this problem in the past and resolved. If yiu have a better idea then by testing each port call please let me know

  Thank you

  caleb1993

• My integrated Webcam is recognized by MAX but not as the IMAQ device

  Hello

  I use with 2014 LabVIEW IMAQ 14 and IMAQdx14.

  I am able to use my webcame MAX both in the Vision Assistant, but when I am trying to generate vi, in the wizard, IEEE1394 Imaging is grayed out.

  When I am using triggered image acquisition and select cam0 as the name of the interface (name of my camera to the MAX), I get the error code:-1074397163 (NOR-IMAQ: the session or the interface passed is not valid.)

  In MAX, I can see and use my camera, but it appears directly in the devices and Interfaces (and not under devices NOR-IMAQ)

  I can't find out if it is compatible live show... Is this to say that my camera is not supported by IMAQ? Is there a way to check whether LabVIEW?

  Thank you

  Karol

  Hi Karol,

  Since you are able to use the camera in MAX, it is DirectShow compatible. The reason why you get this error, it is that your device is not compatible with the IMAQ driver. Instead, you should be using the driver IMAQdx and corresponding IMAQdx live. Once you use those, you should be able to control in LabVIEW. It isn't an IEEE 1394 device either, so I think that it is expected that all options for this would be grayed out. Hopefully that should get you going in the right direction, but please post again if you have problems with the generation of VI you.

  Thank you

  Katie

• Camera works to the MAX, but not in LabVIEW

  I struggled a lot with getting a camera DCC3240M of Thorlabs working in LabVIEW. The software supplied (Thorcam) works as it should. However, the LabVIEW SDK does not work as it should, it gives an error 155 "the operation is not supported.

  Instead of the SDK software, I tried the drivers for DirectShow and now the camera arrives in MAX and works as it should. He also appears with IMAQdx list Cameras.vi and in Vision Acquisition Express vi. BUT when I try to run IMAQdx open Camera.vi or the Express vi it does not work. Open device gives a DirectShow error code 0 x 80040275 "no capture hardware is available, or the hardware is not responding." And when I try to select the camera in the express vi, a red icon is displayed and I can only choose "Cancel":

  

  It's really very annoying that the camera obviously work with the drivers provided, but I can't use it in LabVIEW.

  I would be grateful for any ideas what is wrong. I'm running LabVIEW 32 bit on 64 bit Win8.1.

  Problem solved!

  I carefully removed all the drivers that came with the camera and then I installed the drivers from manufacturers (IDS) instead of Thorlabs drivers. And now it works, the camera always appears in MAX and it does not work. But now the supplied screw. I'm so happy. It took me a week to understand.

• communication serial port works to the max, but not in labview

  Hello

  I am trying to connect a regulator to oxygen flow (flow Bronkhorst EL) to a laptop through a USB using MAX and Labview series port adapter. After the MAX aperture, I see my instrument on port COM5 and need to change the baud rate to 9600 to 38400. After this I querry the command: 06030101217D00\r\n, I can turn the mass flow at maximum power regulator (looks a little weird order because of the syntax of the instrument, but it works very well). If I write a vi to do the same and send the same string through visa series, I get no results, it seems that the command is not send to the device. I tried to change all settings for the serial port, nothing seems to work.

  I've attached an example vi here, any suggestions?

  Hello

  just a simple misunderstanding, happy that you added the code.

  In MAX \r\n will be always interpreted as send a cr and line break.

  In LabVIEW only when you select \codes view by right-clicking on the channel.

  In your situation, it now sends a-a r another- and a n

• FireWire camera works to the MAX, but not in LabView

  Hello

  I use a 1394b (grey Grasshopper Point 14S5M-C) camera connected to a 1394 bus controller. In MAX, the camera works fine, but it will not work with all files of 1394-example LabView. These allways throw the error "NOR-IMAQ IEEE-1394: (Hex 0xBFF6800F) attribute not supported by the camera" even if some of these example like "grab.vi" files no attributes are defined at all. On the same computer, another device (Point Grey Scorpion 20SOM, 1394 (a) works without any problem.

  Can anyone help?

  Hi Christian,

  Thanks for this tip, this is the reason. I was unintentionally using the IMAQ instead of example IMAQdx files. With IMAQdx it works now.

  Best regards

  Karl

• Camera detected in MAX, but not found in Labview

  Hello

  I have a camera Thorlabs USB (DCC1645C). I installed the drivers and MAX detects the camera, but when I try to open the camera with NOR-IMAQdx, it does not appear. I also tried to open with NOR-IMAQ camera, but I could not.

  If I try with Vision Express/Vision acquisition, the camera appears, I am able to select and configure the principle of the camera, but when I execute the program there a mistake: 'not found room '.

  It would be great help.

  Thank you

  Hi AurelioSilva,

  In fact, NI-IMAQ driver is used only for materials. For the hardware part 3 (such as your USB camera), I recommend the use of iMAQdx. You can find the difference between the iMAQ and iMAQdx here: http://digital.ni.com/public.nsf/allkb/0564022DAFF513D2862579490057D42E

  Now, back to your problem. When you talk about LabVIEW 2013 (64-bit), I think that it is perhaps the issue. You see, most of the drivers like iMAQdx and iMAQ are supported by LabVIEW 2013 (32-bit) only. Don't worry, you can install and run 32-bit LabVIEW 2013 in your 64-bit computer OS cause I do this all the time with 3rd party cameras. In short, not all drivers of OR are supported on a 64-bit version of LabVIEW. You can read about it here: http://digital.ni.com/public.nsf/allkb/E9B4EA0143514DCB8625725D0050680A

  Warm greetings,

  Lennard.C

• PCI-GPIB and controller movement legacy Newport Orion-CM - timeout in MAX but not MATLAB

  I kinda a weird GPIB problem which seems to be related to the legacy quirks of implementation of GPIB.  The system I use is an Orion of Newport-CM, which has a controller of electrostrictifs actuator in him as a monitor of power on separate GPIB addresses, but a physical port.  I have it connected via a<= 2m="" cable="" to="" an="" ni="" pci-gpib="" board. ="" i've="" tried="" both="" the="" 2.6="" and="" 2.2="" ni-488.2="" drivers="" and="" both="" act="" the="">

  I found that when I try to query the device through MAX, I can see a SPY OR that the first FindLstn mark 2 units, but expires (probably to try a * IDN? command, because it signals no response).  After that, if I try other commands via MAX or MATLAB, all the GPIB commands time out, so I have to power cycle the Newport before being receptive again.  I tried every permutation of the GPIB driver located in MAX without result - always the same behavior settings.

  Curiously, however, when I use the device only in MATLAB (with the instrument control toolbox), I can have some success, but with delays every now and then are not paralyze the MAX in the same way, it was.  I am able to open the device with:

  mcobj = gpib ('nor', 0, 1);

  fopen (mcobj);

  and query with:

  fprintf(mcobj,'*IDN?');

  data = fscanf (mcobj);

  and get the good * IDN? response.

  In addition, I can do writing and reads the device (with intermittent downtime... I found I need to leave at least 0.3 seconds between commands, which leads to a slow operation).

  It left me speechless.  Of course, it appears the interface GPIB works, maybe slowly, but if I'm not mistaken, the same driver should be usage of communication for MAX and MATLAB, why so MAX time so that I am able to have the operation in MATLAB?  Are there some low level which may be different that I cannot change in MAX or GPIB configuration, but is defined by MATLAB?

  Any thoughts appreciated.  Newport is as usual MOM on obsolete parts, and their job is not much help outside retailer orders GPIB (Nothing on the specifications of the bus).

  Thank you

  Scott

  Thanks for the tips.  It seems that the old Newport is just really, really slow (must be material and mid-1990 s), so he needs a good break between her send GPIB commands.  I installed the 1.7 legacy drivers, and those at least have correctly the * IDN? the device response.  Gpib MATLAB interface is quite simple you can give sufficient breaks between commands to send to the Newport, so in it, I am able to control the time between orders.

  It seems that it is just a matter of a slow device.  I know not what look like the internal FindLstn characteristics and, therefore, why the new version of MAX expires while the old ones do not, but for really old hardware that there could be GPIB read/write in the new pilot who are too fast to actually really old equipment sufficient time to respond.  Thanks again for the input.

• Unit works fine with MAx but not with Labview visa series

  I have a RPM sensor connected to tachometer Monarch monarch, it gives error while coding in labview and works very well in Max if the sensor does not read 0. I wrote RS-232 simple programs never had an error, but this one's errors... not ablt remedy... Help, please

  Hello

  I solved it by using bytes to the port if there is anything in the port, I read it otherwise, he simply says no playback.