QA register does not respond

Similar Questions

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Satellite A210 - 17l - keyboard does not respond

  Hello

  I have a problem that is driving me crazy.
  When I press F2 or F12 to switch on the keyboard behaves as it should.
  However if trying to load a Boot CD or Usb car via the options F12, the device is recognized
  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.
  What makes strange, is that an external keyboard is recognized but the mirrors one internal.
  I have the latest version of the bios update.

  F2 in the bios - ok keyboard.
  Start in win7 - keyboard ok.
  Insert bootable back disk via F12 option-charges but no keyboard reagent.
  I think a partial corrupt bios
  Someone has ideas about problem or even a solution.

  Posted by mr.pound
  

  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.

  And what should happen on this stage?

  For me, this looks like a problem with your startup disk.
  I installed OS using different disks of Microsoft or USB recovery media and all you have to do is click on most of the time on the button NEXT.

  If the keyboard works in BIOS and Windows, I see no problem with the keyboard there.

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed

• address bar does not respond by typing the URL and press on enter

  Address bar does not respond by typing the URL and press to enter. All the other links work well. I used version 7 and version 8 upgrade did not fix the problem

  I had the same problem. I just uninstalled digsby ask toolbar, and now it works.

• my Mozilla Firefox is reduced to a small rectangle (top left of the screen) and does NOT RESPOND to my attempts to use the Firefox browser. That's happened? Firefox would RESTORE it please the Firefox browser to my laptop.

  I was Mozilla Firefox under Internet Explore months ago. Very happy with the maintenance functions, etc. A few weeks ago, I received a message from update while doing some work but have not installed the update at that time. Another update message came with a note of support, confused indicating some dangerous consequences if I have not installed the update.
  A few keystrokes later and my screen seem to go haywire, and my laptop does not respond to my cursor. I stopped. When I restarted and went to the shortcut of Firefox a tiny icon (1 "x 1/4") replica of a part of the normal screen of Yahoo! Firefox appeared and continues to do so whenever I try to use Firefox. I am now to Internet Explore. HELP me to go back to the use of Mozilla.

  Right-click on the image of Firefox in this small window of Firefox and see if there are in this menu popup enlarge . If so, click on enlarge.

  To be clear, Yahoo! Firefox is a modified version of the official Firefox program and may have defects that are not in the official version.

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Tecra M7 - pen does not respond

  Hi, does anyone know what I have to installed to get the pen works on a version a M7 Tablet 2005 scripted. All devices are detected and working properly, but the stylus just does not respond.

  Thanks, will

  Salvation will be

  Is your preinstalled Tecra with supplied recovery media? Sorry, but if you write on pen that I put t see any reason why it shouldn't work.

• iPhone 5 s screen sometimes does not respond to touch

  I bought for almost a month, there is however a problem annoying me lately.

  As a first step, the screen did not touch once per day.

  A few days later, this problem happened all too often that I just couldn't ignore it more.

  Fortunately, I found the way to resolve is to turn off the screen and then turn it on (not reboot the phone), so the screen can work again.

  Just as I was about to return to drag it to the screen, the problem of the screen does not appeared immediately, and that just happened to me when you type these words... so I could only repeat these steps once more. I must say that is rarely the case, most of the time, I only need to do this once.

  I would like to ask if anyone knows how to fix this bug (maybe?) completely

  Thank you and sorry for my bad English ^ ^ |

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the screen.

  If the screen is working again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• I am suddenly unable to rename folders. Insert the cursor, but it does not respond when I type characters, or even when I hit him back out. Know a simple fix?

  After cropping of a photo with Photoshop I discovered that I was unable to rename.  I soon found out that the same thing is true when I tried to rename main folders in My Documents.  I am able to insert the cursor, but it does not respond when I type characters, or even when I hit him back out.  Know a simple fix?

  Name change is a directory operation.  It would seem that you have read and write access to your directories, but you do not change access.  This highlights a problem with file permissions.  How is 'Simple' the fix depends on which version of Windows you have to a certain extent.

  Windows XP Pro (with "Simple file sharing" turned off) using the security"" tab. When you right-click on a file or a folder and select 'Properties', then click on the 'Security' tab to view and change the permissions.

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Windows XP Home Edition is a bit more complicated.  You can start safe mode and log in as administrator for the 'Security' tab as above, or you can open a command prompt window (start-> Run-> "cmd") and allows you to display the 'cacls' command or change the permissions of files and folders.  You should check that your username has permission to ull 'F' for your records.  Not pretty, but it works.

  CACLS: <> http://technet.microsoft.com/en-us/library/bb490872.aspx >

  HTH,
  JW

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer