QoS sge2000p-basic mode

Similar Questions

• Connecting two servers vCenter for a server for SSO in basic mode

  Can you connect two vCenter servers to a single server for authentication, if authentication single server configured in the basic Mode?

  For example, I have two vCenter servers in one site. I have install Single Sign on server on a separate virtual computer.    Two vCenter servers use only one SSO server for authentication.  Does it work?

  http://blogs.VMware.com/vSphere/2012/09/vCenter-single-sign-on-part-1-What-is-vCenter-single-sign-on.html

• AF:query - how to hide the basic mode attribute, but see the/add in advanced mode

  Hello
  
  I have a requirement initially hide some attributes when displayed in af BASIC mode: query with the possibility of adding these attributes hidden in ADVANCED mode.
  
  Is it feasible somehow?
  
  Edit: JDeveloper 11.1.2.3.0, ADF BC
  
  Kind regards
  Miroslaw
  
  Published by: Miroslaw 2013-01-16 14:59

  Hello

  Always mention your JDev version.

  If you are using BC4J as your model, you can create criteria defined display attribute is visible which mode under the guidance of the user interface and use this criterion as query Panel in your page.

  Arun-

• Access only to the basic Mode

  Hi all
  
  I would like to know how to set basic only Mode for my users when they connect in Hyperion planning. I don't want them to see all the features, this basic Mode is perfect for them.
  
  Thanks in advance

  You cannot change the user mode because its properties record for each account.
  You can write the Guide to simple user for internal use only.
  for example "1st post newspaper on you must change it to basic."

• Customize the search box on LOV - basic mode

  I created a text of entry with a list of values in JDev 11.1.1.2 and designed the search box this LOV in basic mode (mode in advance) for fields in the drop-down list box to choose the search as condition: contains, begins with, equal to... disappear.
  I wonder if there is way to all fields of research in a State 'Contains' in this basic mode (because now, by default, in my region, the search for some research fields 'Contains' and some in "equal to").
  We know how, please help. Thank you.
  
  Published by: Mun on January 30, 2010 22:11

  I use JDev 11.1.1.2.
  With the help of your LOVSearchRegion, I can't access the search list in the tab Interface user Hint If the LOV_DepartmentName Edit list values editor because he is disabled.

  Change the "default list" for a type LOV (no choicelist).

  In addition, it is possible if the display criteria and the list of values belong to the same object in view.

  Yes. It is possible.

• The rebels x3i (600 d) auto focus not working not not in Zone creation mode. Works very well in the basic modes.

  I bought a refurbished Canon Canon x3i after my extended warranty Ritz camera became useless and my xTi (400 d) died last summer. The camera has been excellent until very recently.

  About a week or two ago the autofocus stopped working. I think it all started when I decided to try the objective of refurbished Canon 50mm 1.8 that I bought on the internet. He has not worked for that lens, and has not worked in the design area since.

  There is an asterisk (*) in the lower left corner of the viewfinder. It is an indicator of progress of AE. There is no active focus. Sometimes, the nine of them will be light, but it doesn't mean anything.

  Based on responses from other posts on the forum, I tried different objectives EOS (I have two rebel film cameras) and I tried the LiveView. The same problem. I can live with the situation, but, obviously, I'd rather not.

  Naturally, the manual focus works fine.

  The pins on the camera look and feel fine - no elbows or broken bits. The pins look good, too, even the 50mm lenses.

  (I have not contacted Canon, yet, because the after-sales guarantees are usually 30 to 90 days, but I will contact them tomorrow)

  I don't think that you have found the free camera.  You MUST clear all settings.  Looks like you have memorization of commissioning.

• UAC dialog box does not accept entries in user or administrator of basic mode

  On a Windows 7 Professional machine, whenever the dialog asking me if I want to allow changes, the dialog box will not accept any input at all.  Count it freezes unless I have call the Task Manager and terminate the running program that awaits a response that I can't give him.

  Hello

  1. Since when are you facing the issue?

  2 are logged as administrator?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

   

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

   

  Method 2:

  I also suggest you create a new user account and check.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  See also:

   

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this helps and keep us posted.

• How permanently change basic in standard mode mode

  I have 2 computers, the two Firefox running. The office (XP MS) opens in standard mode, the laptop (Win7) in basic mode. I wish to open in standard mode but cannot see how to do this. It is easy to switch to standard mode, but he always comes back to the basic mode next time it opens. I searched help and you can't see how to change. I missed this setting when I installed on the laptop.

  Sorry, this isn't a problem of Firefox support. Try to use a Windows support forum using this question.

  http://lounge.WindowsSecrets.com/index.php

• Basic and advanced mode in EMP 11.1.2.2 planning

  Hi I'm new to Hyperion planning. I tried to create a list of tasks, but I am not able to switch from basic to Advanced Mode. Like all the time only base Mode is available in the view.
  As expected the Administration must get off in basic mode, but it is available all the time even in basic Mode. And I'm not able to perform all tasks in the tasks list created.
  Need help.
  
  Thanks in advance.
  
  Kind regards
  Sushil

  The concept of "Basic Mode" vs "Advanced Mode" disappears with the version 11.1.2.2. I'll start my VM in a bit and get back to you on how to create a list of tasks.

  -Jake

• A80: CD-ROM uses only PIO mode?

  Hi, I have a laptop A80, properly up and running fine...
  But if I try to burn a disc with Nero or Recordnow it often breaks down and the buffer to be missed...

  I checked the IDE control settings:

  the primary controller is very well and uses the Ultra DMA 5, but secondary to the cd-rom use only PIO although "DMA if available" is enabled!

  is this normal? I did a bios update, but that did not help...

  pls help me!

  (Sorry for my bad English)

  Hello

  Well, as far as I know, that it should be possible to change these settings manually.
  But I think s an operating system. I found on the Microsoft site info than after the Port IDE/ATAPI Windows driver (Atapi.sys) received a total of six time-out or cyclical redundancy (CRC) check errors, the pilot reduced the speed of communication (transfer mode) since the above basic mode (DMA, Direct Memory Access) to lower DMA modes in steps.
  You should visit this site. I m you will find a solution for this problem.

  http://support.Microsoft.com/?kbid=817472

  Good bye

• Auto focus does not work in the creative modes

  I use EOS 600 d for the past three years. I was and I am not able to auto focus in creative modes. I actually thought that there is no installation of the auto focus in creative modes. Only when I attended a workshop in Chennai yesterday, I got to know the automatic update facility is available in creative modes too.  I tried with three lenses and in all cases autofocus does not work in the creative modes only. In basic mode, it works well. I browsed the forum and found to RESET. How a reset should be done? Someone please explain. I can't find any updated firmware for 600 d.

  Thank you, Mr.Waddizzle. I did a reset according to your advice and now AF works in the creative modes also. Thank you.

• Acer Liquid Z3 Modes fast

  Anyone know how to add contacts (photo) to the homescreen for none of the above modes? I am able to add widgets with direct line on the default Android homescreen, but not for modes of basic or senior :-(

  Sorry I misunderstood your question

  OK, I found the way to add some dials/quick abbreviated

  Select Senior or basic mode of quick settings, on the background, you will have a few tiles with avatar inside.

  at the bottom right, you will notice a tile of parameters (speed), tap tile and insert the PIN asked (this is the PIN you chose for the Quick modes);

  in the next upper-left screen, you will see a window called "speed / P...» ", tap on that and it will appear a list of empty strings with side + appears to the right, press on the + and add the contact you need like Speed dial or with direct line.

  When adding contacts to the speed, press the back button until you return to the screen of your main base.

  hope you understand what to do.

• Cisco QoS for VoIP 300

  I have a question about best practices for packages of priority voice on the LAN side.

  We have everything configured on the firewall/edge device for the prioritization of voice, however I'm not sure of the exact to take sideways steps LAN to make sure that the LAN traffic will not affect voice quality.

  A very basic configurations: vlan 1 (the default) for data and vlan 100 (voice) - the ports are configured as general (1untagged, 10tagged).

  At this point, the phones are manually set with a vlan, but form read these forums I see that I can accomplish this by creating LLDP and automatically assigned to him the vlan instead, manual setting

  My main concern, however, as mentioned above, is QoS.

  Does anyone have a good practice or advice on how to Setup QoS specially for the voice.

  I found this pdf file, but I didn't know where they came up with the EIF and CBS values.

  https://supportforums.Cisco.com/docs/doc-13461

  This is my first post on the forums; Thanks in advance for any help provided.

  Hi Thomas, this is done automatically through the QoS of Basic. Within a bunch of tag VLAN, it is a value of CFP (3 bits). When the switch receives such framework it will honor the value based on this value of CFP.

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• Setting up QoS on SGE2010 to support VoIP trunks between PBX

  People, I'm stumped on how to configure QoS on my SGE2010 in support of my Toshiba CIX PBX VoIP trunks.  The infrastructure is simple:

  PBX (1)<==>SGE2010 (1)<==>SGE2010 (2)<==>SGE2010 (3)<==>PBX (2)

  where PBX (1) and PBX (2) are connected by three SGE2010 which are resources shared via fiber between the buildings.  I have not combined VoIP and are on their own VIRTUAL local area network switch.  All the rest was child's play in these switches but I have no experience with QoS and does not help the Administrator's guide.

  Jim

  Hi Jim,.

  The QoS of basic service should be everything you need for the switch. QoS works for traffic of penetration only. Basic behavior dictates QoS, if you upstream assigned QoS, the switch will approve the values as is. If there is no QoS upstream, the traffic of penetration will be marked according to how the traffic is classified. All output of the switchport traffic will not be noticed.

  On a dish network, 1 vlan, the default CoS value untagged 0, what is relevant for the packages. You can change these values from 1 to 7 for the traffic untagged. That reference the charts CoS for values of 1 through 7 in average.

  Strict priority for QoS queue will depend on how the traffic is marked. With strict priority, the highest value traffic will be allocated first on the output port. So you should drop.

  The part that most have problems with the DSCP values. These are defined on the DSCP to queue. You will notice a queue next to a DSCP brand. This traffic is ranked on that contains the package. Voice traffic typically DSCP 46, which by default has a line higher, I think that 3 by default. The switch will put the DSCP value for the traffic of penetration or trust the brand of penetration. But it will not note traffic out.

  I hope that clarifies a bit your request.

  -Tom
  Please evaluate the useful messages

• vCenter linked mode SSO

  Hello

  I am trying to understand the SSO with related modes works

  Today I have a vCenter installed with SSO installed as a base and. Now, I implement SRM here and after I install the second vCenter as base too much on the other site and try to create a linked mode an error pops up

  in ID incompatibility or something like that. I read that multisite is necessary to deploy related modes.

  How can I configure related here, but the problem is that I can't change the basic deployment in the first vcenter because it uses Nexus 1000V is a complex configuration for me.

  I can reinstall the second vCenter because nothing is yet set in.

  Thank you

  Unfortunately because you have it installed as a base, there is no way to install SSO multisite.

  According to the documentation

  "Server vCenter linked mode instances can be connected to different physical servers of Single Sign-On, but must be connected to a single Single Sign-On logical server. An only Single Sign-On logical server can be one of the following forms. »

  With 2 sets of basic mode, they are 2 physical and 2 logical SSO server.

  What should have been done is the first vCenter install SSO on the first node of a multisite SSO and when the second gets installed you create a UNIQUE authentication server separate but accede to the first node. Logically, this will be a single instance SSO so now both servers can be managed from a single web client and can be regulated in bound mode.