The rebels x3i (600 d) auto focus not working not not in Zone creation mode. Works very well in the basic modes.
I bought a refurbished Canon Canon x3i after my extended warranty Ritz camera became useless and my xTi (400 d) died last summer. The camera has been excellent until very recently.
About a week or two ago the autofocus stopped working. I think it all started when I decided to try the objective of refurbished Canon 50mm 1.8 that I bought on the internet. He has not worked for that lens, and has not worked in the design area since.
There is an asterisk (*) in the lower left corner of the viewfinder. It is an indicator of progress of AE. There is no active focus. Sometimes, the nine of them will be light, but it doesn't mean anything.
Based on responses from other posts on the forum, I tried different objectives EOS (I have two rebel film cameras) and I tried the LiveView. The same problem. I can live with the situation, but, obviously, I'd rather not.
Naturally, the manual focus works fine.
The pins on the camera look and feel fine - no elbows or broken bits. The pins look good, too, even the 50mm lenses.
(I have not contacted Canon, yet, because the after-sales guarantees are usually 30 to 90 days, but I will contact them tomorrow)
I don't think that you have found the free camera. You MUST clear all settings. Looks like you have memorization of commissioning.
Tags: Canon Camera
Similar Questions
-
One of our MacBook has been connected to the internet through our router base station Airport Express wireless and wifi worked very well. All of a sudden, the other MacBook could not connect. After a few days of no connection on one while the other worked, we rebooted the modem. Now neither laptop connects. We called our ISP and they verified that all is well with our internet service or the modem. Internet works fine with the cable plugged directly on each machine. Under network in system preferences, I get this message: "Wi - Fi 169.254.49.8 auto assigned IP address and won't be able to connect to the internet." When I run the diagnostic, I get a message saying that my network configuration has changed, but it has not changed anything. We have never gone and nothing changed since we first set up the modem and the AEBS. Any ideas on how to solve this problem?
Yes, the express can do that... Suddenly lose the configuration and return to the bridge for example even when connected to a modem to bridge.
The solution is simple... Press reset and redo the Express installation.
NOTE... an Express is not expected that the main router... It's light to etc. of airprint, airplay wireless bridge. Don't wait to have no problems when you use the Express to do the work of the extreme or TC or another router should do.
-
http://64.165.34.7:8134 / videoplayer3.html works well, but http://64.165.34.7:8134 / flash_ready.html does not load video in Firefox (black screen with the plug-in is needed, when you try to install "couldn't find any plugin"). Chrome works very well. IE shows an outline of the flan.
flash_ready.html <!DOCTYPE html> <html> <head runat="server"> <title> HTML5 sample video player </title> </head> <body> <form id="Schedule" runat="server"> <div > <EMBED height=500 width=700 src=http://64.165.34.7:8134/videoplayer3.html allowscriptaccess="always" wmode="transparent" allowFullScreen="true"> </EMBED> </div> </form> </body> </html> videoplayer3.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Sample HTML5 Video player</title> </head> <body> <h1>Sample HTML5 Video player demo</h1> <object type="application/x-shockwave-flash" data="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" width="640" height="360"> <param name="movie" value="http://flashfox.googlecode.com/svn/trunk/flashfox.swf" /> <param name="allowFullScreen" value="true" /> <param name="wmode" value="transparent" /> <param name="flashVars" value="controls=true&poster=http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2Fbig-buck-bunny_poster.jpg&src=http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny.mp4" /> <img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" /> </object> <p> <strong>Download video:</strong> <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4">MP4 format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv">Ogg format</a> | <a href="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm">WebM format</a> </p> </body> </html>
I used this instead of < embed >. He began working
< object type = "text/html" data = "http://64.165.34.7:8134 / videoplayer3.html" style = "width: 460px;" "height: 260px" > < / object >
-
12 Firefox does not get beyond the crash report. This is a second account (standard). However, it works very well on a third party, as well as on the main one admin account. I reinstalled Firefox, disc repaired permissions and so on, but nothing helped. For the second account .plist file could be damaged? I can't remove it because of permissions so cannot test this. Please notify.
Try to repair disk permissions:
-
recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well
Hi mikedav,
Thank you for using the Microsoft Windows Vista Forums.
Method 1:
Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Just click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.
Method 1:
Follow the instructions in the link below which will help you solve the problem.
Tips for solving problems with Internet Explorer
http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx
Method 2:
Follow the instructions in the link below to optimize Internet Explorer.
How to optimize Internet Explorer
http://support.Microsoft.com/kb/936213
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
AOL 9.6 works very well since XP account administrators but... any other account on the PC when AOL sign on it immeadiately can sign with "AOL had a problem and had to sign. Any ideas? AOL gave a bad scripted reload all the response of the AOL software.
Thank you
Hi Splinter1,Try the steps listed in the article below and check if it helps fix the problem:If this does not help, contact AOL support better. -
Original title: Internet wireless connection
I use a PC & a cable modem wireless to connect to the Internet. When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well. The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web. This could be a looming problem with the modem, or is it something else? Should I consider it as my modem is still under warranty? ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.
Thank you
[Transferred from Internet Explorer]
Roll up your sleeves & cross your fingers...
ACTIONS:
[You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]
1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.
3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.
4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]
Note: Good for IE9, too.
4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.
4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.
5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]
6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings
Note => for best results, check the option Remove personal settings .
7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].
8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]
9 restart once again & test.
10. in response to this post with a status report.
==================================================
[1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en[2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.
[3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
-
My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver. How to stop this message?
Visit the HP website and download the driver you need.
Good luck.
-
Trapcode particular not showing on Render but works very well in the compose window
Trapcode particular not showing on Render but works very well in the compose window.
Hi do not know why it does not appear in my Render.
My computer is not trolling, everything works fine.
My computer specs:
I7 - 5820 k
GTX 970
16 ram
Composition window:
Render:
Try adjusting the comp on camera Active - this is what happens for rendering. I don't know where you got this name of camera or whether it was imported from a 3D rendering, but to be sure to always have the comp set to camera activates when you're overview of your work.
The usual troubleshooting procedure is to go to the bottom of the list of changed properties and start reset first those most suspicious. Many times it is easier if you solo the layer in question.
The first suspicious that I see, it is the position of your transmitter would be behind a normal camera to default position:
If I add a camera by default to a model, add a solid, add individual and then use your position parameters the particles all move out of sight of the camera
After a reset:
-
"Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.
Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.
Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.
You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.
Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat
If the problem persists ask please check with another user account.
Kind regards
Christian
-
I synced with my Iphone 6 various collections and works very well. Question: is there a way to get out of the photos from my phone to TV via Apple TV? Camera does this but not the App mobile Lightroom Dave
Hello
There is no feature that can do this in Lightroom Mobile from now.
You can post your comments/idea here Photoshop community customer family
Thank you
-
I created an interactive navigation along the animated and imported and that the muse.
Animations works very well, but does not have the interactivity.
((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
Anyone have an idea how I can fix this problem?Hello
As you use the edge with muse file you do not put the full URL.
Please try the code below.
Window.Open("..) /.. /arbeiten.html","_top");
Concerning
ViveK
-
Photomerge works do not cc2014. By aligning the works but really bad mixture. works very well in cc
After resetting the preferences in cc default 2014 seems to work better.
-
Getting a message that my system is blocking the program but their isn't an indication that my system is interfering with its operation. Antivirus programs have been removed from my computer; That is to say. Norton Antivirus, Symantec Antivirus. Firewall doesn't seem to have this effect on the operation of Security Essentials. Why I get this message when I restart my computer is a mystery to me, because it works very well after downloading until I restart my computer. My email address is > * address email is removed from the privacy *.
Hello
Did you change your computer before this problem?
A possible reason for this problem is that you have installed entirely or partially on the computer security software conflict.
You may need to use a cleaning tool to remove your prior security software:
Microsoft Security Essentials - Installation Checklist and frequently asked Questions
http://experts.Windows.com/w/experts_wiki/89.aspx
If the problem exists, you can ask your question in the Forums of Microsoft Security Essentials.
-
The program is configured to run from a direct click using a text file specifying where the source files and destination. Worked very well for a direct click or from the. BAT file. It runs the Task Scheduler, I can see it appear in the Excel Task Manager when it is active. But while it freezes. He reads the spreadsheet looking for specific elements then output to a CSV text file.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)*
Maybe you are looking for
-
How to solve this problem?
-
DeskJet 3050: Hp deskjet 3050 print queue problem
I have a problem in printer queue, a document won't delete my queue, so nothing will display. I tried everything off and under voltage switching without result.
-
For how long should the battery last with my brand-new z2? When I play a game or use the Internet for a short time the battery goes from 95 to 85%. This is not true? Expected. I go to the store and trade it for a new?
-
Unique number with the manipulation of XML on the 8520 with OS 4.6
Our application works on many devices with os 4.6 to 7. It's a platform for learning with a function like get server classes and show to the user. This course has the configuration xml file this demand analysis. App works fine on all phones, except o
-
My save as pdf dialog has mysteriously disappeared. How can I get that back?
I use Illustrator CS5 on a Mac in the Mavericks. I did a bunch of images using a model, and now I'm eager to make my images in pdf format. I'm going to 'File' > ' Save as ' and select "Adobe pdf" and then click Save. This is used to bring up a separa