QOS with ASA - corresponding to questions of packages
I have a few questions of mote of ASA and QOS - level code 8.2.5
Let's say I have the following...
TG-NonVoice class-map
corresponds to the tg-traffic-acl access list
class-map-traffic TCP
corresponds to the tcp-traffic-acl access list
class-map voice-TG
match dscp ef
match tunnel-group x.x.x.x
How to know the hierarchy of what the ASA uses to match a package? Since a package can only correspond to a class-map, I created the access list to refuse statements to ensure that the packet matches what I want. Example - tcp-traffic-acl access list, I didn't include the traffic tunnel so I denied the traffic of the tunnel at the beginning of the access list. This is the correct procedure given that I did not know what order the ASA aligns packages to my access to my class-maps lists. Y at - it an order? TG-voice has priority in the plan of the policy is it automatically get used to match first?
Second example:
Let's say I
TG-NonVoice class-map
match flow ip destination-address
match tunnel-group x.x.x.x
class-map-traffic TCP
corresponds to the tcp-traffic-acl access list
class-map voice-TG
match dscp ef
match tunnel-group x.x.x.x
Here I have only an access list. How know if order used to filter packets? If I don't want the tcp-traffic-acl include NOT packages that could possibly correspond in the VPN tunnel that I put a refusal at the beginning of the list of access for VPN traffic to be sure? What would be the rate used by the ASA to determine if a packet matches a rule of class-card for a package would correspond to multiples, but from what I've read, that it does not get included in other once it corresponds to the first match. Understand?
Thank you
Hello
I think that this price covers everything
This is the best document I found on the web about the MPF.
To take a reading
http://blog.INE.com/2009/04/19/understanding-modular-policy-framework/
Note all useful posts!
Kind regards
Jcarvaja
Follow me on http://laguiadelnetworking.com
Tags: Cisco Security
Similar Questions
-
Original title: microsoft difficulty 50747
I can't uninstall microsoft silverlight. I get the message that I need to check with the installer of the hotfix package. Pls help!
Hello
Because the problem is related to Silverlight, I suggest you post this question in the Microsoft Silverlight forum.
-
NAC Appliance with ASA (for remote user VPN)
I have a pair of firewall 5520 cisco which is used as a VPN gateway (for remote user VPN) and perimeter firewall Internet (to provide outbound internet connectivity).
We allow the NAC to remote VPN users. I have it will be deployed with active 3 layer inband.
The problem with this design is that how to ensure that outgoing internet traffic does not pass through the CASE?
I heard about couple of optioins:
-ACB (for send only IP subnet to VPN users remote to go through CASE)
-Version 8.x characteristic of ASA (Restrcit access to VLAN under Group Policy).
I intend to do with ASA firewall where I can set a new subinterface on the SAA (with a new tag VLAN) and under the group policy for remote user VPN, I select the option to "restrict access to the new VLAN.
My question is: is - it still works (even if the firewall have a route to the internal network by using the 'inside' interface and NOT the new interface of the NAC). If this does not work, please let me know what are the other options for this type of deployment.
Thanks in advance.
Hello
It should work. Please see the attached PDF for more clarity on this topic: https://supportforums.cisco.com/docs/DOC-9102
HTH,
Faisal
-
Remote access VPN with ASA 5510 by using the DHCP server
Hello
Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?
I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:
!
ASA Version 8.2 (5)
!
interface Ethernet0/1
nameif inside
security-level 100
IP 10.6.0.12 255.255.254.0
!
IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)
!
Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
!
Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dyn1 1jeu transform-set FirstSet
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap map crypto inside interface
crypto ISAKMP allow inside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
!
VPN-addr-assign aaa
VPN-addr-assign dhcp
!
internal group testgroup strategy
testgroup group policy attributes
DHCP-network-scope 10.6.192.1
enable IPSec-udp
IPSec-udp-port 10000
!
username testlay password * encrypted
!
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
strategy-group-by default testgroup
DHCP-server 10.6.20.3
testgroup group tunnel ipsec-attributes
pre-shared key *.
!
I got following output when I test connect to the ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO
4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048)
, : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740)
, : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80
Kind regards
Lay
For the RADIUS, you need a definition of server-aaa:
Protocol AAA - NPS RADIUS server RADIUS
AAA-server RADIUS NPS (inside) host 10.10.18.12
key *.
authentication port 1812
accounting-port 1813
and tell your tunnel-group for this server:
General-attributes of VPN Tunnel-group
Group-NPS LOCAL RADIUS authentication server
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
No Internet connectivity with ASA 5505 VPN remote access
Hello
I configured ASA 5505 for remote access VPN to allow a remote user to connect to the Remote LAN officce. VPN works well, users can access Office Resource of LAN with sahred etc., but once they have connected to the VPN, they are unable to browse the internet?
Internet navigation stop working as soon as their customer VPN connect with ASA 5505 t, once they are disconnected from VPN, once again they can browse the internet.
Not ASA 5505 blocking browsing the internet for users of VPN? Is there anything else that I need congfure to ensure that VPN users can browse the internet?
I have to configure Split Tunnleing, NATing or routing for VPN users? or something else.
Thank you very much for you help.
Concerning
Salman
Salman
What you run into is a default behavior of the ASA in which she will not route traffic back on the same interface on which he arrived. So if the VPN traffic arrived on the external interface the ASA does not want to send back on the external interface for Internet access.
You have at least 2 options:
-You can configure split tunneling, as you mention, and this would surf the Internet to continue during the use of VPN.
-You can set an option on the ASA to allow traffic back on the same interface (this is sometimes called crossed). Use the command
permit same-security-traffic intra-interface
HTH
Rick
-
Adobe Acrobat 9 Pro that came with my Adobe Design Premium CS5 package is no more launches. I did not any changes to my computer and I use Windows 7 Professional. I tried to fix and change of control panel of my computer and nothing was working. Also, I tried to download the updates from Adobe by clicking on the update for Adobe Acrobat 9.5.5. The update seems to installs correctly, but the Adobe Acrobat 9 Pro cannot start. I would like to know how to solve this problem.
[Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]
reset your preferences - https://forums.adobe.com/thread/1595848?start=0&tstart=0
-
I am very new to the software online, please bear with me. My question is this: I want to create my own designs I want to use for the manufacture of silk scarves. I'll have to provide professional silk production houses these designs so that they can use my design patterns to create these scarves in silk for retail customers. What application Adobe should I consider, and I can get a first experimental? Thanks a lot for your help. Looking forward to your response. Best regards, Sunaura
Hello
You can try to use Illustrator or Indesign.
Desktop publishing software | Free download Adobe InDesign CC trial
Hope that helps!
Kind regards
Sheena
-
I would like to be able to align 4 images in a row with their corresponding h2 tags
Hi all
I would like to be able to align 4 images in a row with their corresponding h2 tags. That's what I have, whose lines upward images but not quite.
"< div id ="? ">
< h2 >? < / h2 >
"< a href ="?. HTML"> < img src =" "?" / > < / a > "
< h2 >? < / h2 >
"< a href ="?. HTML"> < img src =" "?" / > < / a > "
< h2 >? < / h2 >
"< a href ="?. HTML"> < img src =" "?" / > < / a > "
< h2 >? < / h2 >
"< a href ="?. HTML"> < img src =" "?" / > < / a > "
< / div > <!-END of the? ->
The CSS - borders and backgrounds are just so that I can see whats going on. The images are 200 x 150.
#?? {
Width: 860px;
Auto margin: 0;
padding: 0;
background-color: #669933;
overflow: hidden ;}
#?? an img {}
float: left;
border: 2px solid red;
padding: 0 10px 0 0;
margin: 0 ;}
#?? H2 {}
font: 15px "Neue Helvetica", Helvetica, Arial, sans-serif;
padding: 0;
margin: 0 ;}
This is the layout that I get
I would really appreciate help with this. Thank you
One thing to mention. When you use float element must have a declared width.
div {}
float: left;
Width: 600px;
}
The images are a little different because the width is implicit, but nevertheless, I thought I would say this.
Martin
-
Creating objects with their corresponding schemas or as SYS
Hi all
Which is preferable? Creating objects with their corresponding schema/username, or simply use SYS to create all objects? Y at - it an advantage or a disadvantage? Are all best practices regarding that?
For example, I have to create several objects in several different schemas (hr, oe, scott, Bishop). I could either connection in each schema individually and create objects, OR I could just connect as SYS as create them all at once. Is there any problem with the latter approach?
Thank you.The rule was stated by Oracle years... do not connect as SYS... ever... except for purposes of maintenance or backup with RMAN.
Advice is always to create the schema of the application, log in as the owner of the application, and create objects as long as this user. Do not follow this advice, all to often, end us with the created objects where they belong... often clues belonged to SYS.
-
How 850 matches with 997 corresponding
Hi all
Someone has an idea how 850 matches with the corresponding 997? With the help of which fileds it will compare.
If send us 850 provider it will show as WAITFA, after reaceving TI 997 shows as complete, I do not understand what the comparison field...
Concerning
CNUHi ALAIN,
But your scenario shows with programming 997 997
Have you tried the steps I mentioned, for the report and database console. I understand what you want to check, and that's what I tell you. Please try to proceed as I mentioned and in case you are still having problems, please check your email. :)
Kind regards
Anuj -
debugging packages with ASA 7.2 worm (2)
Hello
Previously with the version 6.3 of the PIX you can debug the packets in real time. That is to say with the command of debug package.
Looking through the ASA 7.2 (2) order that the command of debug package no longer exists. If the order of packet - trace exists, is not in real time.
Does anyone know how you debug packages with version 7.2 (2).
Thank you
Brett
Create an ACL identify traffic that you want to debug. Create a capture specifying the ACL and the interface enters the circulation.
Example:
capture from the list of allowed access host ip x.x.x.x y.y.y.y
capture mycapture access interface to capture inside list
See capture mycapture detail dump
-
ASA 5505 Firewall Transparent with a Server Web Question
I need to replace my Sonicwall firewall and I got an ASA 5505. However, I need to have a transparent firewall, no Natting and Server Web will have a public IP with relevant ports remains open.
The simple illustration is the Internet---> firewall Transparent - Web Server (With public IP Address)
1. There should be no natting
2. the web server must have a public IP address and be accessible from the internet.
3 ports can be blocked or re-opened.
Please let me know if its possible to conclude this agreement.
If so, can I get a command line sequence that allows this work.
My version is
Cisco Adaptive Security Appliance Software Version 4,0000 5
Version 6.4 Device Manager (9)
Thanks in advance
Post edited by: Don Charles
It is a minimum configuration for your needs (runs on ASA 5520).
!
transparent firewall
!
interface GigabitEthernet0
Description - the Internet-
nameif outside
Bridge-Group 1
security-level 0
!
!
interface GigabitEthernet3
Description - connected to the LAN-
nameif inside
Bridge-Group 1
security-level 100
!
!interface BVI1
Description - for management only-
IP 10.1.10.1 255.255.255.0
!!
network of the WWW-SERVER-OBJ object
Description - webserver-
host 123.123.123.123!
!
WWW-SERVER-SERVICES-TCP-OBJ tcp service object-group
Description - Serices published on the WEB server-
port-object eq www
EQ object of the https port
!
!
OUTSIDE-IN-ACL scopes permitted tcp access list any object WWW-SERVER-OBJ object-group WWW-SERVER-SERVICES-TCP-OBJ
!
!
Access-group OUTSIDE-IN-ACL in interface outside
!Samuel Petrescu
-
HI.i want to connect from xp client PIX via L2TP IPsec connection, but I cant.this is my network.
PIX:
outside = 15.15.15.1/24
inside = 10.10.10.1/24
XP = 15.15.15.2 (connected to the AAS outside interface) client
PIX config:
!!!!!!!!
PIX Version 7.2 (3)
!
pixfirewall hostname
activate the password xxx
names of
!
interface Ethernet0
nameif outside
security-level 0
IP address 15.x.x.1 255.255.255.0
!
interface Ethernet1
nameif inside
security-level 100
IP 10.10.10.1 255.255.255.0
!
interface Ethernet2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet3
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet4
Shutdown
No nameif
no level of security
no ip address
!
passwd xxx
passive FTP mode
TR1 extended access list ip 10.10.10.0 allow 255.255.255.0 17.17.17.0 255.255.
55.0
TR2 extended access list ip 10.10.10.0 allow 255.255.255.0 17.17.17.0 255.255.
55.0
list of access allowed extended l2tp udp any any eq 1701
pager lines 24
Outside 1500 MTU
Within 1500 MTU
17.17.17.2 - 17.17.17.10 vpn IP local pool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0-list of access tr1
group-access l2tp in external interface
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac ipsec
Crypto ipsec dy 1 transform-set dynamic-map
crypto card cry 1-isakmp ipsec dynamic dy
out cry crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
!
!
Sevan strategy of Group internal
attributes of sevan group policy
Protocol-tunnel-VPN l2tp ipsec
Sevan username password xxx
sevan username attributes
Protocol-tunnel-VPN l2tp ipsec
sevan tunnel-group type ipsec-ra
tunnel-group sevan General attributes
vpn address pool
Group Policy - by default-sevan
Sevan tunnel ipsec-attributes group
pre-shared-key *.
Sevan tunnel-group ppp-attributes
No chap authentication
ms-chap-v2 authentication
context of prompt hostname
Cryptochecksum:xxx
: end
in the client Xp I configured the vpn connection correctly according to the examples I found in the Cisco documents.
When I try to connect from xp client nothing happens I turn on debugging and I get this error:
Oct 07 12:04:51 [IKEv1]: group = 15.15.15.2, IP = 15.15.15.2, cannot
find a group valid tunnel, abandonment...!
Oct 07 12:04:51 [IKEv1]: = 15.15.15.2, IP = 15.15.15.2, peer group of withdrawal of
table peer has failed, no match!
Oct 07 12:04:51 [IKEv1]: group = 15.15.15.2, IP = 15.15.15.2, error: unable to r
eMove PeerTblEntry
Oct 07 12:04:52 [IKEv1]: IP = 15.15.15.2, invalid header, lack of payload SA! (n
support useful ext = 4)
Oct 07 12:04:54 [IKEv1]: IP = 15.15.15.2, invalid header, lack of payload SA! (n
support useful ext = 4)
Oct 07 12:04:58 [IKEv1]: IP = 15.15.15.2, invalid header, lack of payload SA! (n
support useful ext = 4)
Oct 07 12:05:06 [IKEv1]: IP = 15.15.15.2, invalid header, lack of payload SA! (n
support useful ext = 4)
Please help me find the problem! Thank you
I recommend something similar. But instead to "no protocol-tunnel-vpn l2tp-ipsec", you can also place the order
"vpn-tunnel-Protocol l2tp ipsec" in the DefaultRAGroup tunnel-group concerned both group policy. Just make sure you don't violate one of your other VPN. See this for more details:
http://www.securityie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=10;t=001767
Concerning
Farrukh
-
question of package ID for an existing application
Hello
I can't update my version of the application because of the question 'ID of Package must match ID of Package in the bundle of original file.I recently updated my laptop and after the upgrade, I published an update and it has been accepted by the world of BB. Its a few months since my last update. I have a new update to my candidacy and now I'm stuck in the question above.
My BBIDToken has expired, so I'm a new to the dev site. saved in a location, and then run the script of "blackberry-signatory" to connect my bbid with KSB files. running the script says ' Info: CSK connected successfully to BBID' but after cleaning and re - compile, file bar is not always be accepted by the world of BB.
I checked my name-package and it corresponds, however, package-id is not, that is the question. I have files from previous bar, can be used in some way to extract the information needed to get the update?
Also, I used 'restore' option in the Configuration of signature BlackBerry with a zip file consisting of barsigner.csk, barsigner.db and author.p12.
BTW, I followed the steps on http://supportforums.blackberry.com/t5/Native-Development/Help-Package-ID-must-match-Package-ID-in-o... but no luck.
Please suggest.
Step 3 must be done once, before starting to use a token created in your BlackBerry ID account Do you have applications using key method (CSJ) that is earlier than chips BlackBerry code signing ID? Initially link to your BlackBerry ID Token when you installed everything first he?
By default, the tools uses a BlackBerry ID token if it is present, ignoring the code signing key. If you have installed the token, signed, and then linked to your previous code signing keys, it would change the package author Id of the BlackBerry ID account to match the original code signing key account. This could have happened?
Send me a private message with your package-author-Id of your original file BAR and I can watch the account used to sign.
-
Well, let me explain: when I save a web page in FF, it will create a. HTM file and a matching subdirectory file name plus the suffix "-Dateien" (German version - I guess that in the English version, it would probably be "-files ' or maybe '-data" instead...). In any case, now if I delete this subdirectory (including all its contents) with Windows Explorer (I'm still using XP, btw), it will also remove the correspondent. HTM file in the parent directory. Question is: why/how is she doing that? Would it be a hard or symbolic link phenomenon that escapes me?
Greetings from Munich & thanks in advance!
Manfred
It is a feature of Windows called connected files linking the main file and the folder with other files for certain operations on the files and HTML files among others.
If you delete one of them while the other is deleted automatically (same for the copy).- http://msdn.Microsoft.com/en-us/library/Windows/desktop/bb776887%28V=vs.85%29.aspx
- http://www.Microsoft.com/mspress/books/sampchap/6232.aspx
You can use the registry (regedit.exe) editor to create a NoFileFolderConnection of type DWORD REG key and set the value to 0x01 to turn off this feature to "manipulate connected files as a unit.
- HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\NoFileFolderConnection: REG_DWORD 0 x 01
Change the value from 0x00 to re activate.
See "operations on a file or a HTML file also apply to the same HTML file or folder name:
Maybe you are looking for
-
When I opened a second tab in Firefox, it won't go to my homepage. Instead, it goes to a page that shows what looks like a collection of pages (or links) that I visited in the recent past or distant. I rather go to my homepage, which is much more use
-
Hi all, I have an old (win98) T2130CT... Is it possible to use an external PS/2 mouse? thanx T - cay
-
Equium A80-132: Configfree said switch wireless turns off when it is
I got my A80-132 14 months and it don't did me not a bit of boredom. I didn't need help before so this is my first time on the forum and it seems very useful. Congratulations to all. Anyone know how I can get ConfigFree to recognize my wireless card
-
Safari does not work. The "safari" in demand is no longer open
Safari does not work. The "safari" in demand is no longer open. I have an imac.
-
Cosmetic glitch of Boolean properties window
When you select 'Properties' from the context menu of a Boolean control, the following window opens: Note the location of the checkbox "show the Boolean text." It can be expected, but I doubt so.