Qosimo F750 - questions using Tripplehead2go

Similar Questions

• Questions using app mail using account MSN. Error: address msn is not available and will not be synchronized.

  Original title: Questions using mail app

  We got a new laptop in August 2013 and had accounts msn.com e-mail and yahoo on the mail app in windows 8. any fine until last Wednesday 1/10 when we now get message that the msn address is unavailable and it will not sync (or send test message) Yahoo account always fine and no problem on other devices - phone, i - pad & pc and no problems online via explore or google.

  Any suggestions? also is there anyway to check the details of the e-mail on the mail application accounts?

  Hello

  Yes, you can uninstall and reinstall the application only after checking the links below to solve the problem.

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  See also the links: http://windows.microsoft.com/en-ca/windows-8/setup-email-contacts-tutorial
  http://Windows.Microsoft.com/en-CA/Windows-8/mail-app-tutorial

  I hope this helps. Feel free to write us again for assistance and we will be happy to help you come.

  Thank you

• questions using VCBmounter to back up a windows 2008 VM

  Hello

  I will have questions using the vcbmounter command to back up a server windows server 2008 R2 Standard VM. I can backup all our servers in 2003 successfully using this command.

  If anyone has experienced this? is there something that I need the OS to allow the VCB Proxy Server take backups?

  vcbMounter h u Pei m san - one ipaddr: [IP address of the virtual machine] - r t fullvm

  Thank you

  Amar

  Before you go to just update try uninstalling the VMware tools VSS driver. If I remember correctly, I had to do this to make working with W2K8R2 before U1 VCB was released. I don't know if it works, but it could give you at least a backup of consistend of crash.

• How does knowledge graphics wich Qosmio F750-120 use?

  Hello

  How can I be sure that the Nvidea works instead of the graphics card intel?
  I can't go to the resolutions of 1900, so I think that something is not working properly...

  To be honest I don't understand your question.
  What model of laptop do you have?
  What operating system do you use?

  resolution of 1900? On the screen the internal?

  Please be so kind and explain your problem in more detail.

• A few questions using Linux on Satellite L30-10 x

  Sorry to bother you people, but I had this satellite L30-10 portable x.

  I try to make it work with my o/s preference, what is Linux (or any unix-based), for which the goal, I need to know what's what in there, IE.

  1. how chip works for the compatible softmodem V. 90 - 92?

  2. What is happening with everything that controls usb ports?

  I found a live-cd that makes the USB ports of the work, which is the work of disks usb-Clerkship on them, so I'll solve this one thanks to study how it does, and 2 of the 3 live-cd I used seems to have the graphics (up to new problems when I try for different resolutions..)
  but that leaves the question of the modem.

  I haven't tried something more, like the WiFi network, pc-card (I hope that ethernet works... it is usually without much trouble).

  There is also a good question on the cd/dvd drive, that is, it is declared as a "super multi" one (whatever that means) and a 'double layer' one and nobody promised anything about burning DVDs with it (the seller certainly didn't), but the docs online here @ toshiba - Europe.com say about the L30 series it is supposed to be able to burn 8 , 5 GB, so it it true finally on the specific cd/dvd driver 10 x model or what?

  I understand that many people would disagree with the use of linux on a machine designed for a specific software company,
  but I still believe that the manufacturer of this product (the satellite laptop L30-10 x) should tell customers what's in it, period.

  In short, if you can not help with my questions above, please tell the best, you know who I should ask, which is supposed to be responsible for what is in this anywhay for laptop, a mailing address or e-mail, something to try for more information.

  Thanks in advance,

  Olgamari

  Hi Olgamari

  See this section of Linux using search option. Maybe you will find some useful information. Otherwise, you can follow pages:
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html
  http://www.Linux-laptop.NET/Toshiba.html

  Bye and good luck!

• Question: Using Sqlplus to create a report

  Hi masters Sqlplus,

  I have the same question as the old thread calculate from the number

  COIL D:\TEST. TXT

  BREAK ON COL1 ON REPORT

  CALCULATION NUMBER OF COL1 NODUP REPORT

  CALCULATION NUMBER OF COL2 ON REPORT

  with the data as

  (

  Select 'AAA' COL1, COL2 '1111' from dual

  Union of all the

  Select 'AAA' COL1, COL2 '2222' from dual

  Union of all the

  Select 'AAA' COL1, COL2 '3333' from dual

  Union of all the

  Select 'AAA' COL1, COL2 '4444' from dual

  Union of all the

  Select 'AAA' COL1, COL2 '5555' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '1111' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '2222' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '3333' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '4444' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '5555' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '6666' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '7777' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '8888' from dual

  Union of all the

  Select 'BBB' COL1, COL2 '9999' from dual

  Union of all the

  Select "CCC" COL1, COL2 '1111' from dual

  Union of all the

  Select "CCC" COL1, COL2 '2222' from dual

  Union of all the

  Select "CCC" COL1, COL2 '3333' from dual

  Union of all the

  Select "CCC" COL1, COL2 '4444' from dual

  Union of all the

  Select "CCC" COL1, COL2 '5555' from dual

  )

  Select * from data;

  SPOOL OFF

  ED D:\TEST. TXT

  The result is like that.

  COL COL2
  --- ----
  AAA 1111
      2222
      3333
      4444
      5555
  BBB 1111
      2222
      3333
      4444
      5555
      6666
      7777
      8888
      9999
  CCC 1111
      2222
      3333
      4444
      5555
  --- ----
  19   19
  
  19 rows selected.
  
  
  

  How to get the count (col1) = 3, no 19?

  For now, I can't use grouping to customize the result, because I have to give the secondary account for each col1 and the short dash line.

  Please give me advice.

  Phil

  Post edited by: Phil in Sydney

  The end result is the sequel.

  COL COL2
  --- ----
  AAA 1111
      2222
      3333
      4444
      5555
  BBB 1111
      2222
      3333
      4444
      5555
      6666
      7777
      8888
      9999
  CCC 1111
      2222
      3333
      4444
      5555
  --- ----
    3   19
  
  19 rows selected.
  

  Hi, Phil,

  Here's a way to change the query:

  WITH hide_col1 AS

  (

  SELECT col1 AS original_col1

  col2

  ROW_NUMBER () OVER (PARTITION BY col1

  ORDER BY col2

  ) AS r_num

  FROM the data

  )

  SELECT THE CHECK BOX

  WHEN r_num = 1

  THEN original_col1

  END AS col1

  col2

  OF hide_col1

  ORDER BY original_col1

  r_num

  ;

  All SQL * most orders can stay as they are.

• bidi-override for Leading zeros questions using causes out of special characters

  I use the below listed Tag to overcome the main question zeros and the looks of perfect pdf format and excellent format output. When the invoice number value is copied from excel to a Notepad file or anywhere, he adds a special character (square) before and after the value.
  
  < fo:bidi - substitute direction = "ltr" unicode-bidi = "bidi-override" > <? INVOICE_NUMBER? > < / fo:bidi - substitute >
  
  To avoid the above problem I tried to use the alternative in my SQL as method "=" "| invoice_number | » » ». This avoids issue zeros and special characters in Excel, but when the same report is presented in PDF output format it shows the = and quotes for the value.
  
  I tried to use <? XML version = "1.0" encoding = "UTF-8"? > and <? XML version = encoding "1.0" = "ISO-8859-15? > but no use.
  
  I read a lot of posts in this forum, but none has the solution.
  
  Anyone can guide me please?

  Maybe use different formats depending on the type of output file.

  If you use EBS under the competitor Manager, you can find the type of output to help file

  SELECT argument5 FROM fnd_conc_pp_actions WHERE concurrent_request_id = :p_conc_request_id AND action_type = 6
  

  You can add a similar logic to...

  Standalone BEEP, not sure but I am sure that it is possible to know what the output file type is too.

• strange question use stop() to control a scenario after loadClip

  Hello, I have this strange question:

  I want to control the scenario of a swf file loaded with loadClip command.

  I wrote this code

  var loader: MovieClipLoader = new MovieClipLoader();

  loader.addListener (this);

  function onLoadComplete(_mc:MovieClip) {}

  _mc. Play()

  };

  loader.loadClip (swfname, _root.holder)

  function pause() {}

  _root.holder.stop)

  }

  function pause a button is used to stop playback of the loaded movieclip.

  strange thing is that stop() works when you test the movie by the flash application and plays from the projector. It DOES NOT WORK when he runs by embed code html in swf or swf directly.

  I checked a lot of time and the name of the 'container' is resolved, but the command does not work for his screenplay.

  thanx for help

  Daniele

  you wouldn't expect this stop() never work.  Once the loading starts, stop() no longer applies to the target of a loadClip (or loadMovie) method.

  to resolve, use the stop() on the first frame of the loaded swf file editing.

• Questions using corresponding without putting them in a quiz

  If I did things properly, you can have as a quiz in a course and can not really use quiz "question types" for things you don't want to be part of the functionality of your quiz reviews question-quiz/quiz/recovery count, etc..

  I have a class that I'm adding knowledge as-you-go check for issues that are not part of the quiz.  I came up with a solution of box/button click to make true false and multiple choice questions that give immediate feedback (without using a "type of question" so as long as to Captivate do not integrate into the quiz).  Now, I need to come with a corresponding question where I have a list of words and their definitions and must let the user do all their matches and then get feedback on their choices. All good suggestions/solutions on how to build a corresponding to the issue without being a part of the quiz feature?

  Hello Allen,.

  If you want to mimic all the features of the corresponding questions by default you need a solution & slide which is not available out of the box in Captivate. You can find a slide widget & interactive InfoSemantics (works fine), but is not for free:

  http://www.Infosemantics.com.au/DragDrop/interactive

  If you can cope with only have a drop-down list, you can use the drop-down list or the widget list drop-down which is available with Captivate 5 and 5.5. I've been blogging a lot about custom, but corresponding questions is not processed yet, due to the need to have a D & D widget. Maybe I'll offer a solution anyway, using either the limited version with the drop-down/combobox list or the normal version with an InfoSemantics solution.

  Lilybiri

• Different browsers - Hyperlink view questions - using CS4

  Hi all

  I use Dreamweaver CS4 on Windows 7 (if that makes a difference to my point?)

  I developed the following site - http://www.ridethehill.com

  I'm completely self-taught, and as a result, I am stuck on this problem.

  As my site is on a green background, I opted for a white, bold italics to the text. Accordingly, all my hyperlinks in text are white (underlined) too, once again, it's fine for me.

  However,.

  The buttons, I did down the announcement side of left hand header, use all the links for my site navigation. In Google Chrome and Safari, it looks good, but in Firefox and IE a square box (suggesting a link) is displayed around the buttons... that looks like garbage...

  How can I remove these boxes in Firefox and IE so it looks as it should (in Chrome and Safari)?

  Again, could be a stupid question, but as I said, I'm self-taught and learn as I go...

  Any comments on the site, comments or responses to my question would be amazing.

  Bravo for this reading.

  Andy

  Add the following rule to your stylesheet:

  an img (border: none ;})

  The code of the page could use a huge cleaning:

  1. to remove the double CSS, CSS redundant and conflicting CSS.
  2. avoid absolute links to pages on the same site

     example href = acatalog/index1.html"

     instead of href ="http://ridethehill.com/acatalog/index1.html

  3. eliminate the references on your hard drive in some links
     example href =file:///C|/Users/Andy/AppData/Roaming/Adobe/Dreamweaver CS4/en_US/Configuration/Pages/2009CentrePrices.htm
  4. outsource all of your CSS rules to a single .css file and link to it from every page of your site. This makes CSS more efficient and easier to manage, and reduces the file size of each page
  5. use descendant selectors in your CSS
     http://CSS.maxdesign.com.au/selectutorial/selectors_descendant.htm

     Instead of

     for each p tag

     set #content p in your CSS (to target each

     tag within a

     then you avoid having to add class=" a_b"="" inside="" every="">

     tag.

     #content p {color: red ;}}

     
     

     Text here

     
     

     Text here

     
     

     Text here

     
     

     Text here

     
     

     Text here

     
     

• Questions using C3 and Plateau OnDemand

  I am having some problems with the functionality/reports of a quiz. It's only my second draft statement, then I'm really my back started with this question. The first course/quiz reports perfectly, functions perfectly and not return any errors. The only difference between the two is method declaration. The first one uses other SCORM, AICC. The quiz on the problem itself is 25 randomly selected questions from a pool with a slide of the intro (total 27 slides). I use SCORM 1.2 content being housed at the iContent and OnDemand Plateau containing the actual LMS (we are completely farmed, with the exception of the development). These are the problems that I work with.
  Bookmarking - if I leave the quiz in the Middle before the end and run it again, I'm back to where I left when that I raise. If I get at the end of the quiz and fail and start again to resume it, I takes me to question 23 and am not able to resume the quiz of all.
  Continue the results screen button - does not seem to do anything when you click it if I do not see the course. If I pass the course, everything works perfectly.
  
  Any help would be greatly appreciated. I looked in the forums to try to avoid a double post, but nothing really treated this specific issue. Sorry, that's such a long post

  Hi MrFrankZ and welcome to the forums!

  I don't think that the questionnaires are intended to be put into bookmark in SCORM. My understanding is that if a quiz is not performed in one session, it must be restarted from scratch. It's the 'proper' approach is to disable bookmarking for quiz (in Captivate 2, I think that it's the "never send summary data" option in the Quiz Manager |) Tip section. Button settings... do not know where it is in Captivate 3).

  That said, you can try to score the quiz in "optional" option and uncheck the "user must answer all questions" in the Quiz Manager and see if that fixes things for you.

  The only downside I see is that if you * make it work, I doubt integrated Quiz Resumepage of Captivate can give them credit for the questions that they answered at the previous session. At best, it would be misleading to the user when they access the Quiz summary page, and in the worst case the user would never get credit for the course (if they have too few questions left to give them an overall pass mark).

  When you do that, you're probably better to just disable the bookmarking and demanding of questionnaires from the beginning every time.

• Several questions using the fixed layout

  I'll try to explain all my troubles and excuse my English.

  Problems for a long time, iTunes Connect, Pages or iBooks author.

  I'm basically a writer of children's books using the EPUB fixed layout as a template. One of my books with (interactive) video I've corrected several times through many contacts with support until I discovered that the problem was that iBooks was unable to read the EPUB 3.0 presentation stops and freezes. Currently, this problem has been fixed.

  In fact, iBooks author nor Pages have fixed layout support. For example, the EPUB models presented in the Pages carry only vertical presentation - where are the horizontal templates for books on photography? iBooks author is made for classic books requiring chapters and sections that are unnecessary for children's books who just needs the blank pages where the images can be copied / pasted with text. It is, but not so simple.

  At the moment I have finished another book and used Epub Checker. Everything was OK, so I tried to download it using iTunes Connect.

  To my dismay iTunes Connect returned with several error messages missing both Epub Checker or inDesign.

  I am here to tell all this issues with Apple tools and how they do not work in practice.

  If you ask Apple to make improvements in its applications, for them to see that you must republish to

  http://www.Apple.com/feedback

• Question using blackberry-nativepackager

  I try to use the nativepackager to build the AccelerometerSampleMakefile project, but I get this error about to enter:

  Error: Attribute-Entry Point: file is not found in the list of the packaged files: AccelerometerSampleMakefile

  I analysis of the bar - descriptor.xml to go through and copy the list of assets, and I'm making sure to include the assets of the active configuration as well (which is just the binary file). I copy all assets in the 'generated resources' folder and then run this command:

  BlackBerry-nativepackager-package of AccelerometerSampleMakefi.bar bar - descriptor.xml - created e-resources.

  If I replace the "-e-resources created. ' with '-C-resources created" I get this error:

  Error:! Active path invalid "NOTICE"!

  The examples in the documentation for blackberry-nativepackager being quoted first binary entry point. If I do that nothing changes.  Just to remind, the binary is listed under the directory of resources generated with all the other assets in the bar - descriptor.xml.

  (Sorry for the typos, I'm on a phone right now)

  Can you give me full command line? e option requires two arguments - local access then bar assest path path.

  When you specify the entry point that you specify by bar the active path, if the path does not match - he cannot find the entry point

  For example, if the project sounds like you

  MyDir/bar - descriptor.xml

  MyDir/arm/mybinary

  MyDir/Icon.png

  You can package it like this

  BlackBerry-nativepackager-package out.bar - devMode mydir mydir/bar - descriptor.xml - C / icon.png mydir/arm/mybinary mybinary EI

  Better to specify all the files in the xml file

  mybinary

  Icon.PNG

  Then just bar bar - descriptor.xml for package manager (assuming you curdir is mydir)

• Copy paste functions question - use CTRL + C in the computer a. someone over the network from other data CTRL + V. use of the appearance of the computer A computer.

  Hello world

  I had a problem with the copy and paste functions in my corporate network environment.

  This must happen frequently and there associate with P & C data.

  Scenarios:

  User A is to copy data in his laptop using CTRL + C functions. and he did not make any problem with copy and paste functions.

  He is able to copy and paste without any problem.

  BUT. Someone from another computer (USER B) in same domain, use CTRL + V function to paste.

  When USER B use CTRL + V. He will receive the data that USER A previously copied.

  I'm curious to know how the data can go other the computer Clipboard?

  Hope someone can help me with that. :(

  Kind regards
  Suhail

  MSN

  I saw this on my own computer with customers.  Team Viewer or RDP was still running.  I copied my client stuck.  It is repeatable and I informed observer team (what I use) and they created a bug report.

• Outgoing Caller ID question using CUCM 8.6, MGCP gateway &amp; PRI lines

  Hello

  We have two ranges DID with our provider: 02825911XX & 02829212XX

  02825911XX maps extension 11XX

  02829212XX 12XX expansion cards.

  We have 2 E1 lines 60 channels.

  Current configuration:

  CUCM <----MGCP---->Gateway (8.6.2) (2921) <======2 e1="====">carrier / Teleco.

  Question:

  When calling 11XX we get correct caller id 02825911XX.

  But when the 12XX we receive caller ID 02825911XX instead of 02829212XX.

  for example: when calling 1206 far end caller id watch 0282591106 instead of 0282921206.

  No problem in incoming calls on the two beaches.

  The external mask are configured correctly in the domain name.

  The debug ISDN q931 shows the correct caller until the gateway ID:

  ISDN Se0/0/0:15 Q931: TX-> INSTALLATION pd = callref 8 = 0x016A
  Complete package
  Carrying capacity I = 0x8090A3
  Standard = CCITT
  Ability to transfer = speech
  Circuit transfer mode
  Transfer rate = 64 kbit/s
  The channel ID I have = 0xA98396
  Exclusive, Channel 22
  Display i = 'test '.
  Calling party number i = 0 x 0081, '0282921206'
  Plan: Unknown Type: unknown
  Called number i = 0 x 80, '82353587'
  Plan: Unknown Type: unknown

  Fixing ccapi inout & ISDN q931 debug. & Gateway config.

  Hello Gyanendra,

  I checked the configuration debug and gateway.

  These debugging come from gateway. The catwalk shows TX - Setup. Once we have sent installation information to the telephone company, I don't think that we can change the ID calls information. This means that we send correct calling Telco part number information (0282921206).

  May be that Telco is changing the number on their own party? Have you checked with Telco yet? If not, ask them what is the number of parties calling they get. You can do a live test and track same call with the telephone company engineer.

  The details of trace log:

  00:49:25.410 Sep 10: ISDN Se0/0/0:15 Q931: TX-> INSTALLATION pd = callref 8 = 0x016A
  Complete package
  Carrying capacity I = 0x8090A3
  Standard = CCITT
  Ability to transfer = speech
  Circuit transfer mode
  Transfer rate = 64 kbit/s
  The channel ID I have = 0xA98396
  Exclusive, Channel 22
  Display = 'Ludvík Aunedi' i
  Calling party number i = 0 x 0081, '0282921206'
  Plan: Unknown Type: unknown
  Called number i = 0 x 80, '82353587'
  Plan: Unknown Type: unknown
  00:49:26.222 Sep 10: ISDN Se0/0/0:15 Q931: RX<- call_proc="" pd="8"  callref="0x816A ">
  The channel ID I have = 0xA98396
  Exclusive, Channel 22
  00:49:26.222 Sep 10: ISDN Se0/0/0:15 Q931: RX<- alerting="" pd="8"  callref="0x816A">
  Sep 10 00:49:26.258: / / 6444, 9E3008C18C96, CCAPI, ccCallModifyExtended:
  Numerator = 0x2B305B60, Params = 0x2B304D78, Id = 6444 Call
  Sep 10 00:49:26.258: / / 6445, 9E3008C18C96, CCAPI, ccCallModify:
  Numerator = 0x18E30, Params = 0x2B304F80, Id = 6445 Call
  Sep 10 00:49:26.258: / / 6444, 9E3008C18C96, CCAPI, cc_api_call_modify_done:
  Result = 0, = 0x2AF52C6C, Id = 6444 Call Interface
  Sep 10 00:49:26.262: / / 6445, 9E3008C18C96, CCAPI, cc_api_call_modify_done:
  Result = 0, = 0x2AD55F80, Id = 6445 Call Interface
  Sep 10 00:49:29.406: / / 6444, 9E3008C18C96, CCAPI, cc_handle_inter_digit_timer:
  Generate inter-chiffre timeout CC_EV_CALL_DIGIT_END event
  00:49:35.262 Sep 10: ISDN Se0/0/0:15 Q931: RX<- connect="" pd="8"  callref="0x816A">
  00:49:35.266 Sep 10: ISDN Se0/0/0:15 Q931: TX-> the CONNECT_ACK pd = callref 8 = 0x016A
   
  Also, can you do another test call and join:
  Debug mgcp packet with debug ISDN q931 and CCAPI inout
   
   
  Kind regards
  Amarjeet