cd rom BD drive not reading dvd

Similar Questions

• After the BIOS update DVD driver not reading not DVD - Sat A80

  Hello

  I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

  Can I reinstall the old bios? Can I reinstall the firmware?

  Thank you
  Ronai Lisboa

  Hello

  Strange!
  On the Toshiba driver page, you will find also 2 Firmware updates.
  Check which drive you unit and try to update the firmware.
  Also try installing the DVD ram driver.

  PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

• DVD drive not read/write

  my dvd drive not reading/writing.its a matshita dvd ram uj - 850 s .windows vista sp2.sony vaio vgn ar 550u.its showing the CD/DVD I insert as empty. someone help?

  Hi dt6789,

  Please see the post below with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/57d84d2b-5dd5-4f37-BADC-9e784a24211c

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Qosmio E10: The drive only reads DVD-R double layer / DVD + R

  Hey all,.
  I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
  He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
  This disc, Mat * a UJ - 830 s equips the Qosmio E10.
  I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.

  There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
  Thanks for reading.

  Alcahest

  Hello

  AFAIK this unit has a DVD Super Multi drive and it must use media suite:
  CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
  DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)

  In addition, these speeds are available:
  Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
  DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)

  Maybe this drive can t use the double layer? I think he uses a normal DVD

  Good bye

• Since the reinstall drivers, my LG DVD writer does not read DVD

  Original title: LG ELECTRONICS LG GSA T40N Super Multi DVD IDE burner

  I had to re - install the drivers on this drive and then I noticed that there is more to read the DVD. This drive will now appear as a CD-ROM read only by car. When I tried to roll back the driver, the option was not available. Re-installing the drivers did not help and when I went to the LG site the disc has been abandoned and no support was available.

  How can I get this drive to read DVDs? What is the problem with the drivers that I have updated to what makes them to record the album as a CD-ROM drive?

  In the run box, type: regedit, and then click OK

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E3

  25-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

  Close the registry editor and restart your computer.

• HP probook 4520 CDDVDW not reading DVDs but it is reading the cd

  My CDDVDW not reading DVDs but it is reading the cd, when I check in the management of the computer-> properties of the drivers-> details-> driver description shows me the cd rom value why?

  Hi, Munirazammuhammad,

  Try the solution given here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/CDDVD-drive-not-reading-any-disks/ed34498f-9885-4482-BF83-e56579884834

• My iMac does not read DVD

  Hello

  My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.

  Thank you

  Matouš PIkous

  Did you use a cleaning CD in the optical drive?

• Windows 8 does not read DVD but CD runs without any problem

  Original title - I habe upgrade to windows 8 way back but my DVD player does not read DVD but CD runs without any problem

  DVD stalk does not read DVDs but reading the CD with no problems. Even in my computer drive shows as CD drive type.

  Hi Rohan,

  I suggest you try the steps suggested by AtishayMSFT dated dated March 6, 2012 at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/hardware/DVD-drive-not-recognized-in-Windows-8/ad546c20-b916-4AD5-9858-52e10610ee14

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• DVD player does not read DVDs but reads CDs only.

  my hp compaq 420 core2 duo dvd player does not read DVDs but only reads the CD. How can I fix this, please help me with the correct answer.

  It will probably replace the drive. There is more than one laser in there: one for each function. You can go bad without the other goes wrong.

  608141 001

  Above is the part number for the DVD burner. I couldn't find one on eBay.  In here is a online:

  http://www.mydvddrives.com/replacement-for-HP-Compaq-608141-001-SATA-CD-DVDRW-DVD-RAM-drive-burner-LightScribe-52029

  Replacement is easy. Remove one screw on the bottom and drag the old hunt and replace it with the new drive.

• DVD/CD drive not reading CD or DVD inserted, clues?

  Hello. I hope someone can help as this was produced during the week.

  The DVD/CD drive not working properly. Whenever I insert a DVD or a CD of my laptop starts apparently read (humming noise), but my laptop does not detect the disc, or open my computer shows the disc. I tried to update the driver, while watching helps out that the window has provided and that you have installed all the updates for my laptop without success.

  Does anyone have advice I can try that can solve this problem, because it becomes an impediment, thanks in advance for any help, you can be able to give.

  Yuuki-chan

  When you open 'Computer', you can at least the CD\DVD himself player? Have you tried another disc?
  Also, go to start Manager select menu\ click device right computer\ properties\ in the upper left part of the window
  In Device Manager, look at your DVD Rom drive, open it and double click on the driver. It doesn't seem to work correctly? Thank you, Jeremy M - Support Engineer

• Why my dvd drive optiarc does not read DVDs but reads cds

  one day my optiarc dvd drive just stopped reading DVDs. It will read DVD if I install linux but I do not like linux, so how can I get running again? It seemed to stop working after an update. I have the device sony optiarc dvd rw ad - 7203a ata

  Hello

  I suggest to follow the steps from the article below and check if this can help,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Hope this helps,

• My D: drive will not read DVDs

  Hello

  I have a desktop with windows Vista and my D: drive is not reading my dvd.  Can you tell me what I should do to fix this problem?

  Run repair:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems I hope I could help

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD Drive not reading CD, need help to diagnose.

  My CD player stopped suddenly reading CD. It has been a little flawed for some time now, but never had any problems with the playback of the media.

  Features: CPU - Q6600 OC @2.8, motherboard - Asus P5KC (Intel P35), GPU - Palit GTX460 Sonic, RAM - Samsung DDR2 @ stock 800 mhz, hard drive - TSSTcorp CDDVDW TS - H653F ATA Device

  Here's a quick list of nonlethal problems so far:

  • Loudly spinning upwards at the start, causing sometimes windows to take more time to start (breaks on a black screen before the loading bar appears), while the player rotation.
  • When open immediatately closes.
  • Very slow to install programs on CD (compared to the old disk)

  As a referance, is a replacement of CD that came with the pc drive. I fried the on-board network and the IDE port on my motherboard while installing a new CPU fan (located at the bottom of the motherboard), I bought this as a replacement a year ago and I pluged in a SATA 2 slot.

  I recently installed a new graphics card and had to reorganize some cables so that it, I checked all the cables to make sure they are in place, but its possible that the connected cables are still loose, some futher information that I'll write below may help you to understand if it is possible.

  The main problem I have is with it not reading CD, but the above can be useful for diagnostic purposes.

  Basically the drive is detected by Device Manager and apparently "works", drivers are installed correctly and it reacts in OS for opening/closing of orders from status bar.

  He just thinks it is still empty.

  The problem started after a windows update that may or may not be a link the ancestral of the problem. I do not do drive but have used about three days before the startup problem.

  Any help is very appreciated

  Burpleronnie

  Hi burple,.

  Looks like the CD player is a failure.

  The computer can be set to boot from this drive first, and he is suspended because the drive does not respond properly.

  I suggest to try the drive in another computer or another drive in this computer if possible.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A40: CD-RW/DVD drive cannot read DVD

  Hello

  The reader combo CD-RW/DVD on my Satellite Pro A40 (14 months) stopped reading DVDs (DVD - R or the video, have not tried other types), although it can play DVDs some time. I've cleaned the disc by using a cleaning disc. I think the problem started when I upgraded the OS to WinXP SP1 to SP2, but not sure. I tried CD - R and CD - RW writing and no errors were reported, but the CD that result are unusable (can't be read in the drive, with the LED blinks a few times and then to infinity).

  Someone has an idea how solve this ptoblem? Thank you

  Richard

  Hi Richard,

  I suggest that you go the Device Manager on your laptop and then remove your devive DVD-ROM in the list. When you have done this and then select the option "Find new hardware" and allow Windows XP Reinstall the device and associate the appropriate driver.

  HTH