Qosmio F10-124 - pixelated, flicks in white screen, then returns to normal

Similar Questions

• Qosmio F10 begins with lines on the screen then goes black

  If anyone can help.

  I have a F10
  When I start it, I start with a line pattern funny on the screen that turns into dirrerant models.
  Then after it starts, it becomes black.
  Runns fan and the drive lights work as is it running.

  I can't get into safe mode and it starts properly and the screen does not black.

  This started with the mires funny when I move something one day and when I did a funny little slider occurred.

  Help, please

  Dave

  + I have more information. It will start and run in VGA mode. If I cange to the mode of the display screen is black.
  Could this be a display driver problem.

  If so where can I download a.

• White screen then freeze or Crash

  1 week ago, I launched my computer it took a while longer for the windows logo to go when he we finished it was a black screen for about 30 seconds then I logged and it was a white screen then after 10 minutes it froze, I left it for the rest of the day. The next day after the 10-minute froze then immediately crashed. I cannot get safe mode now.

  Take off the side cover and check that all connections (power cable to the fan cooling the CPU, motherboard, graphics card, etc.) are not loose and completely inserted, so that your him blow sheep from dust of the CPU fan and power supply. See if that helps.

  Then run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Install the Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  J W Stuart: http://www.pagestart.com

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Cannot load games 'Titanic', 'Travel' - no message just a flicker on the screen, then the game stops. On "Death on the nile" error - latest version of directx. On 'Peril at End House' error - last need direct 3d.

  I have win7, Windows Home premium 64-bit on an HP Pavilion Elite I - 7 core intel and Gateway screen (fx2300). After the last update for windows and ATI, I had problems to read my games - some don't is not loading, some give me access violations, others do not go full-screen. Oh, now I can no longer adjust the resolution of my screen for anything other than the highest or lowest values acceptable (everthing in between is blocked).  I have supported the ATI update several times, but it takes to watch TV in hd. I worked with HP to install and reinstall the ATI update and update of the last window. Whenever errors are different on my games. Initially, they were access violations and some games would not work, I have the update and reinstall it and other games would get the access violation? Now I can't load games 'Titanic', 'Travel', 'Nancy Drew - lights camera curses'. -No message, just a flickering on the screen, then the game ends. On "Death on the nile" error - latest version of directx. On 'Peril at End House' error - last need direct 3d. I have directx 11. All my games worked at the beginning of April. .  I have directx 11.

  First thing to do would be to check the compatibility of the individual games that you are trying to play the Windows 7 Compatibility Center.

  Here is the link:

  https://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Then, DO NOT ever update the drivers through Windows Update. Always install the drivers from the manufacturer's website.

  Is your Windows 7 install an upgrade of Windows Vista?

  Titanic, travel, etc. - are these games, bigfish, BTW?

  If so, contact them.

  I feel ultimately that your user account may have got corrupted somehow.

  Create a new user account and check if you can play the games there.

  If so, fix the damaged user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Flicker flashing white screen...

  My computor screen starts to flicker, flash, then the screen turns white and the computor freezes while remaining on. Does any program I am running, music, internet, word etc... Any ideas?

  This is a portable computer or a computer?

  If the computer screen is blank how do you know that the computer froze?

  If it's a computer you can try another screen see if you get the same problem. If it is a test of the laptop an external monitor and see what happens.

  If it's a computer. There may be value to unplug monitor and resecuring cables and also re-seats of the graphics card (if it has separated).

  If it's a laptop - when it is empty... If you look very carefully or shine a bright light on this subject from a perspective you see the picture?

  Free Support Tools

• Qosmio F30 doesn't work anymore - white screen

  Good evening.

  I seriously need help with a problem with my qosmio F30.
  For some unforeseen reason, he decided to stop working and I am struggling to think of any reason why.

  He is able to enter the laptop itself and when you press the power button the surrounding blue light also, however, that's all, that's all that happens. The cooling fan comes after 30 seconds as planned, but the lights on the front do not indicate the hard drive, kicking in, or actually the any lights on the front, other than the power.

  All I get is a blank black screen. I use my neighbors pc right now which is annoying and I could seriously do with a Board of experts on ho to fix this problem because it is now out of its warranty

  Kind regards

  Hello!

  Just a simple question: you see an image on the monitor of extenral? I ask this question because theoretically the internal monitor may be defective.

  If the outside monitor doesn t work too I think that it s that a hardware malfunction and you should go to an authorized service provider. Technicians can check the laptop's motherboard or the CPU may be defective.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• Qosmio F10-124: some problems after installing Vista

  Hello world

  have upgraded to vista premium
  on laptop with update system and card nvidia geforce 6600 graphics
  rating for graphs 1 shows no transparency at all.

  Can not find driver of common modules like the others
  and also its being played at half speed
  Windows says all devices are working correctly (do not think)

  can you help me
  Alan

  Hello

  As far as I know, Toshiba does not support and does not all drivers vista for Qosmio G, G, F10, F20.
  The Vista drivers are available for G Qosmio F30 laptop
  Therefore, you will not be able to find common modules and others on the download site Tosh.

  The needs of Vista and wastes many resources of the laptop! File, the picture transparency and the Aero feature needs min on 256 MB graphic card, fast CPU and min 1024 MB of memory.
  Here are the requirements material min!

  But you should also check if the transparency of Vista (Eye Candy, magnifying glass effect) has been activated!
  To enable or disable this effect do this:

  1. right click on an empty area of the desktop
  2. Select Customize from the context menu
  3. click on window color and appearance Option
  4. check if you want to enable transparency or not.

• Qosmio F10-124: can I upgrade my CPU a faster chip?

  Can someone tell me if I can improve my CPU to a faster chip, I have the 1.6Ghz CPU in the moment, but I don't know if this is a plug in type or if it is soldered on the motherboard.

  I called Toshiba and they were asked, but until I'm practically the question out, he said no, can anyone help?.

  Thank you very much, Pete.

  Hello

  Generally it is not possible to upgrade the CPU because of several reasons.
  But as far as I know that different Qosmio F20 models were shipped with these processors:
  Intel Pentium - M 1.60/1.73/1.86/2.00/2.13GHz
  Intel Celeron - M 1.40/1.50GHz

• Qosmio F10-124 does not

  Recently, I was playing a computer game on my laptop when the game began to slow, then the screen went absolutely crazy, loads of colors appeared on the screen as points of displacement of the center of the screen, the screen filled with loads of flashing colors.

  He's stuck like that for half an hour until I used the off button as a last attempt to get the judgment goes haywire the computer. When I tried to boot to the top nothing happened, screen was blank, HDD starts, no cooling fans could be heard and Ca? s it!

  My laptop is dead! If anyone had the same experience or knows what could be the problem please help!

  Thank you!

  Hello

  It looks like a hardware problem!
  I think it s a GPU (graphics card) malfunction.

  What to say that the replacement is not easy and I'm sure just a portable computer user cannot solve this problem without any other help from the technician.

  I really recommend to contact the service provider authorized in your country.
  Explain all the details guys and I hope that the ASP finds a quick fix

  Good luck

• Qosmio F10-124 - Question on WIN XP / Recovery of product

  Hello world!

  I tried to use my product recovery DVD-ROM. The display at the outset that it is for 'Win 98'. I predicted, he should have read Win XP. Needless to say that I do not go any further. I guess that Windows Media Center is contained in a product recovery disc. ?
  Where is the center of the media to the folders/files in my notebook?

  Thank you
  Hill82.

  Hello

  Please don t look at what is stated there, just use it. The recovery DVDs has been tested and it will work. Be careful about installing, you'll do. There are standard and expert modes.

  Standard mode will remove all HARD drive and install the OS. Using the expert mode, you can create a partition or install OS on already created one and the entire contents of the HARD drive will not be deleted.

  Good bye

• Need new AC adapter for my Qosmio F10-124

  Hi all

  I am a novice when it comes to this, but can someone tell me the number of product/part of a suitable replacement AC power supply as mine has become defective.

  Any help welcome.

  Hello

  According to the specifications of the laptop you can use adapters and PA2521U-1ACA, PA2521E-1ACA part numbers.

  Good bye

• Qosmio F10-124: where can I get a restore CD?

  Can Hi anyone tell me where I can get hold of some system for my laptop recovery CD

  Hello

  Yes, I can tell you that.
  You can order all the CD from Toshiba at Toshiba service partner in your country.
  Check the display in the forum. You will find many topics on the theme.

  PS: Before you post something you should check the subjects because maybe the same questions may be available on this forum.

  concerning

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• White screen after the upgrade, thoughts?

  Hello

  I have a mid-2011, 21.5 "iMac. When I upgraded from Yosemite to El Capitan, I got the white screen of death on restart. I saved time machine, reinstalled, and everything was fine. When I did the update niveau.1, the same has happened (white screen, then backup, and then reinstall) and now, last night, after le.2 upgraded the same story happened.

  When I run on the armored white mac disk utility, it shows all the hard drive as being full of the 'other', which is certainly not, but the drive is labeled as OK.

  Before I try reinstall, I want to know: what am I doing wrong? I'm upgrading via the App Store, I don't have a hackintosh, no illegal absurdity, etc.. But this problem is boring and repetitive, so I figure there must be something I do. Any thoughts?

  I got a grey screen for a few minutes, I came back a little later and I was looking at a login screen.

  The whole process has been about half an hour.