Tecra A7 fan never stops

Hello!
I have a Tecra A7-108 and still the fan blows air. He don't never stops, even if the laptop is idle and with the utility of standby power configured for the lowest consumption. Because I had a problem with my laptop, I took to the guarantee and asked to look to see if the fan has problems. They said that it was defective, so they changed it. Even with a new fan, he refuzes to stop blowing air (stops only when I turn off the laptop :)). I think it may be a software or a bios problem, even though I've recently updated the bios to version 2.0. Could someone help me?

Hello Vlad

What to say! I know very well that stronger cooling fan is very annoying, especially if the device works under full CPU speed (depending on application). I have a Qosmio G20 and the same situation is in my case. The fact is that cell phones have a lot more power and performance does not compare to older models.

This cooling fan noise is unfortunately present on most laptops that you can find on the market. What's important is what is the priority for the notebook manufacturers. I think that Toshiba's strategy is to protect the material. I've read many reports and tests with the different laptop models. Believe me, in the end it is better to buy some manufacturers known as Toshiba's cell phone.

My Qosmio is also noisier than my old Satellite P20 but cooling fan don t race at full speed all the time. How is it with your Tecra? Is - this permanent cooling fan amusements at full speed?

Tags: Toshiba

Similar Questions

  • Satellite A500 - fans never stops

    Hello

    I did some experiments with methods of cooling of vista...

    First of all, when I start my satellite A500, something like three minutes before the fan to start very quickly.
    When I opened the Toshiba PC Health monitor, temperatures never exceed 40 ° C, but the fan runs at 70%
    Then temperatures decline to something like 35 ° C, but the fan never cease!

    It's exactly the same with the two methods of cooling of the vista power management or the difference is really subtle.

    But a strange thing is when I change the method's cooling performance to economy of execution while the fan is running, then it stops! And it starts again only when the CPU start to become warmer. But again, it remains always under 40 ° C. I think that's not so hot... and the fan noise is annoying when I want to have quiet little.

    So in my opinion, there is a problem.
    If I could change the settings in the economy mode, I would reduce the speed of the fan and I would like to raise the temperature when the fan should start. And when the temperature decreases the fan should stop or slow down to become quieter...

    Thank you for your attention and sorry for my bad English ^^

    Hello

    You said that the fans run at 70%
    This would mean that the cooling modules run with maximum performance, if the temperature remains at the lower level. and that means that the cooling system control module working properly.

    Also you talk about the temperature of the CPU. But there are additional devices such as GPU and HDD that creates the heat dissipation.
    This means that the internal temperature would be different from the temperature of the CPU... possiby is higher...
    That could be one of the reasons why the cooling modules don't stop and run with lower performance.

    However, you should check if your BIOS is up to date.
    If the most recent version was released then it s recommended to update the BIOS.

    See you soon

  • HP Envy 15 i7 window 8/8.1 - FAN never stop

    Hello

    I use this new PC, everything is ok, but the fan NEVER cease.

    I mean, as when the PC is idle, no activity, in a cold environment, the screen is off.

    I think (as in my previous laptop) that the fan would be responsible if the temperature is not too hot while here it sems that he simply never stops.

    The noise is quite always the same (it isn't one more question in addition to noise or speed), but I would like to know if there are a few settings (which I have not yet found) for a peaceful solution.

    Thank you very much

    Hello manageri,.



    The processor fan is designed to run continuously. Even in a cooler environment, the processor can reach alarming temperatures. A processor may have a longer duration if there's a lower temperature.



    If you find the fan turns entertaining, you will have solutions to reduce the speed in which it runs. "Reduce the fan noise'and'why computers generate heat, for your information."

    Kind regards.

  • Qosmio F10-136: the fan never stops after the games?

    Hi, bought this laptop 2 days ago. Build is average... too crack I would say; the keyboard easily dips when you press; the screen is very good (especially for texts, photos look washed out).

    When you go to a high-end gaming, saying Deus Ex 2, the fan is used full throttle of course... Exit to Windows 10 minutes later, the fan continues will and... forever, blowing cold air.

    During the normal work of Windows, the fan is used from time to time, but fortunately shuts down after 45 seconds... I timed it.

    Go ahead and resume immediately or even if a "power different setting", it stops immediately. Someone forget of course somewhere in the driver to turn it off.

    I also see that there are two vents. The one at the back doesn't seem to be anything blowing. Or is it a contribution?

    Hello

    As far as I know the general cooling vents are placed on the left side.
    Did you see if the fan runs at the bottom of the unit? In my view, there are the cooling holes. The air flow more coolant on the left side.
    For more, if you play games on this device all devices run with high performance.
    (map chart, CPU, strip memory, etc.). All parts of this produce a lot of heat. In this case, the cooling fans run also the best performance. In my opinion it is not a position or fault cooling.

    To protect against overheating, the CPU has an internal temperature sensor. If the temperature of computer s reaches a certain level, the cooling fan is turned on or processing speed is lowered. You can control the temperature of the CPU by turning the fan first, then if necessary, reduce the speed of the CPU. Or, by lowering the speed of the CPU first, then if necessary by turning on the fan.

    Good bye

  • Equium A100-147 - fan never stops

    Hello

    have a fan that once it starts to run it wont stop.
    Does anyone know of a remedy

    Thanks Chris

    On my Satellite Pro M70, cooling fan also constantly works at very low speed. I put t know how it works on your device, but it's normal. Constant running on full speed could be indication on any hardware problem but no precise explanation in your ad, I can just say: it's normal!

  • Tecra S11 - 11 H - stop with the fan turns

    Tecra S11 - 11 H stops - seems ok, but when the screen is off, after 3 seconds, CPU-fan begins to operate.
    Pressing the power button / stop a few seconds turns off the machine and shut the fan.

    Support put me to upgrade to the latest version of the prints digital-device driver, but I found the software, no drivers.

    They also told me to upgrade the bios to the latest version.

    Problem is that this update of the bios will not start. He complains about power cord power supply not connected or battery power is low.
    The two isn't true - power cord is plugged in and the battery is fully charged.

    What could I do?

    TIA

    LGKF

    Hi lgkf,.

    Yes, I think the support from Toshiba is just because I found this article on the Toshiba page:
    http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

    As you can see, update the fingerprint software can help you get rid of this problem, then you must update the software of fingerprint. The pilot is a part of the software, then download the package for fingerprints on the Web from Toshiba site.

    Uninstall the older version, reboot and install the downloaded version.

    Check this box!

  • Never stop satellite A500D - 11 c - Fan

    Hello
    Sorry for my English, I'm French

    I have a problem with my computer. The fan never cease, and when I go to pc monitor healt, in my view, that is 70% or more, when I do nothing. If I try to play or wath a movie the computer off. I looked for a solution, but I can't find anything for the A500D. I have windows 7 64 bit and the bios is V1.10 and I can't find a new version.

    I need help

    Hi mrlat,

    Are you using preinstalled version Windows from Toshiba or did you do your own installation?

    You should check the BIOS and load the defaults (F9 key)

    In addition, in Windows power management, you can choose between methods of cooling. Choose battery optimized rather maximum Performance. It should work. :)

  • Tecra M1 fan does not

    Hi, it seems that my fan has stopped running on my tecra M1. I dropped the speed up to 600 Mhz then it executes passively cooled for the moment, the speed is boring, so I would like to get this sorted out.

    How can I go about replacing the fan on this unit? Or at least made him home so that I can test / check that it is not obstructed in some way?

    See you soon

    Hello

    It s not advised to use the laptop if the cooling module doesn't work.
    The CPU can damage the fan doesn't work properly.
    If you want to replace the fan you must remove the keyboard, all peripherals and blankets.
    It is not very easy if you have no experience.
    In this case I recommend to contact Toshiba service partner in your country. You can also order the cooling module compatible with this unit by the service of Toshiba.

    Good bye

  • Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

    The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

    I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

    HP Pavilion dv7-6c95dx laptop

    Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

    Disassembly instructions start on page 41 of the maintenance and Service of Guide.

    Please send BRAVO

  • The plugin check page does not work, it will never stop check.

    My plugin shows Flash as outdated and blocked, despite having installed the latest flashplugin package. I went to plugincheck page to be updated, the bit that never stops check/loading (loading circular animation).

    I don't have a plugin 'Java Deployment Toolkit'. I have "Java (TM) plug-in 11.45.2", I tried to never activate the value, but it does not solve anything.

    ARHC Linux + KDE

    Everything up to date, including Firefox, Flash and Java.

    As of today, the plugin check page started working on its own!

    Maybe it was a bug in the audit tool, maybe something on my system which is fixed by the updates. I'll probably never know.

  • some pages to say I need a plug-in but the plugin finder never stops

    I use Firefox on Ubuntu Linux 13.04 21.0. Some pages come with a message at the top of the page, "this page requires plug-ins to display additional content.» It does not say what plugin or what type of content and the page looks normal - no obvious missing pieces. If I click on "Get plugin" a window appears indicating that it is looking for plug-ins. He succeeds forever and never stops. Usually after half an hour of so I click cancel to get rid of him. How can I find out what plug-ins, he thinks I need?

    I thought I posted this time. If it is a dual display, sorry about that.

    It's embarrassing. I thought that I had installed Flash. I watched YouTube videos and videos on other sites, so I really do not pay attention to my list of plug-ins. Last month, I have re-installed Ubuntu 12.04, who created a new installation of Firefox. Firefox is the browser by default for Ubuntu, but Flash has to be installed separately.

    In Ubuntu, the only way to install Flash is to install the package 'flash-plugin-install' maybe average of manually it install Adobe Flash Linux package, but I didn't get there. Just install "flash-plugine-install" either through the Ubuntu Software Center, Manager Synaptic package, or command line, 'sudo apt - get install flash-plugin-manager '.

    Thank you very much for the time you took to help me.

  • HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

    Hello

    I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

    Please help me and guide what is the cause of this problem and how to solve this problem.

    Gassab

    HI @Kartic

    Welcome to the HP Forums!

    This is a fantastic place to find answers and suggestions!
    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

    How can I find my model number or product number?

    I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

    Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

    You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

    Here is a link to an overheating and Auto Shutdown problem troubleshooting.

    Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

    You can run the Wizard to help HPin order to facilitate this process.

    Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

    Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

    World wide phone holder

    Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

    You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

    How to apply thermal paste

    Good luck!

  • Fan has stopped working on the satellite

    I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

    I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

    How long they tend to take to fix these things?

    Hello

    I put t know 100% if they work on Sunday, but I presume that they don t
    However, can you please tell what camera do you use?

    I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
    So if the fans don't turn you should not turn on the laptop.

    But maybe the cooling modules run only with the lower speed?
    This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

  • GPU on Satellite P100-217 fan never turns on running Linux Gentoo

    Hello

    I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

    Can someone Toshiba please give me some information on how to solve this problem under Linux.

    Here is some additional information:
    Driver version: 1.0.9755
    nvclock version: 0.80.
    Nvclock message: you the fanspeed adjustment only is not supported on your video card type

    Thank you

    Chris

    Hello

    I'm not Toshiba, but maybe I can help you too.

    Type in the console:

    detection sensors

    and follow the instructions. Maybe you need to compile some kernel modules yourself.

  • Windows 7 Ultimate. Computer never stops when windows update is running.

    I recently got windows 7 ultimate system and with the exception of two questions im love it.

    The big one, is that, since at least two to three weeks every time the automatic windows update installs something windows closed, never stops.

    I think the updates are installing, windows just hangs after the update is complete. (history of update of windows said that they where successful)

    The screen will tell me its 1 installation of updates for a few minutes.

    then it will say that its closure, that she will never be.

    Hello
     
    First lets try resetting the components of Windows updates and check whether the problem is resolved.
     
    To reset the Windows Update components, you can follow the link provided below.
     
    Thank you, and in what concerns:
    I. Suuresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • MacOS Sierra not properly to access the Keychain for OpenSSL/SSH passwords

    Hello It seems to be a problem in the Sierra of MacOS on the passwords for SSH keys. I have my public/private key pair that is enabled for access to some linux servers, so I can't SSH in without inserting my password. After upgrading to Mac OS sierra

  • iPhone activation problems

    I erased my new iphone to use go to iOS feature. Later when you set the phone, prompt action came to put the apple id credentials associated with the phone. My own credentials do not work. Do not know how to proceed now

  • A relocation of key for Windows 7 64-bit (y560) recovery

    Hey,. I have an ideapad Y560 and HDD recently crashed, I did have enough time to make a backup of my copy of windows. I bought a new hard drive and install a fresh copy of windows 7 on it, downloaded all the drivers from the website lenovo, but I wou

  • Question of Panel throw

    Hello When I close my program (QUIT button LabWindows) I thought that with the line "DiscardPanel (MainPanelHandle)"; the program is closed and the application is not running. But now I have seen that after this call every button I have in my applica

  • LG G3 for Z3

    I had a quick question. I had a very bad experience with Xperia Z1s and it has me very skeptical to go back to Sony. I'll make this quick, I have a LG G3 and my gripes are lag, stutter, slow response UI trottling and heat into play, leading to a slow