Qosmio F10 - VHS to DVD

Similar Questions

• Transfer VHS video to DVD with Qosmio F10

  Hello
  I really need help, I want to transfer my VHS to my Qosmio F10 videos, edit them and then burn to DVD. I have cable supplied with the machine, more I bought a Svideo cable. I have tried all the ways to connect to their place, but without success. Someone would have a go at describing the steps I must follow to do this?
  I'm not a computer expert, simple language not techno would be appreciated.

  Hi Walter,

  You are looking at a three-step process: -.

  1. connect your VHS player to your laptop (S-Video/s-Video is recommended for better quality imagery, but you'll also need to connect the audio cables from your VHS player to your Qosmio for sound.)

  2. change the captured audio and video using a proprietary software package. You may already have Windows Movie Maker installed, but you can also consider other packages of Nero, Ulead, Pinnacle, Roxio, etc.

  3 burn the project finished on a DVD.

  The whole project can be a minefield, so I recommend taking each step in turn and carefully progressing thanks to gain experience.

  Finally, don't download discouraged by the apparent conflicts between the different pieces of hardware and software. The final result will be very rewarding.

  HTH :-)

• Qosmio F10: Cannot read all DVDs recorded on JVC DVDRW

  I have a Toshiba Qosmio F10 in general I am very satisfied with the camera, but... I don't no why I can't play SOME DVD saved on my DVDRW JVC home and not in others, it's driving me crazy, no matter who else has this crazy situation, any suggestions would be most appreciated, as I add another HARD drive to this unit, 60 GB seems a bit small for a work of TV/DVD etc.

  Thank you very much, keep up the good work Toshiba ;-)

  Hello

  What you mean exactly with some DVD s? There is a specific difference between s DVD? Do you use several virgins DVD s from different producers?

  As far as I know you can built in 100 GB HARD drive.

• Qosmio F10 - the DVD writer speed

  The engraver of DVD on my Qosmio F10 is supposed to get 8 X speed, but the speed option I get using Nero or Sonic is 2 X. can someone please advice on how I can burn at X 8 speed

  Hello

  Well, it's not easy to say what the problem is, but are you sure that it s not a defect of operation of media?
  Have you tested another dvd?

  Good bye

• Qosmio F10 - DVD RAM mast * a UJ - 830 s firmware 1.0

  Hi all.

  My work takes me to travel regularly in several countries and therefore, my DVD drive is running out of parts.
  I thought the point of having a laptop to use it everywhere.
  Well well, not in this case.
  The irony is that it affects only DVD legal copies of inferior quality are region free anyway.
  I have 2 solutions: make the DVD in my final area, or buy disappointing copies.
  A research on carpet * a DVD RAM XX-8XXX came back many messages but no response.
  Change the disc completely work?
  I think that the film industry has completely missed the point, and I gave you a lot of money to get a product that is limited.
  Any idea?

  Hello Chris

  You are absolutely right about the mobility and I agree with you, but the problem is that the laptop manufacturers have no influence on this. Film companies are responsible for this circus. Cell phone manufacturers offer equipment for each region. For the European market, they must offer a driver of DVD that can read the code 2 and so on.

  Qosmio F10 is known to me and on this laptop is not so easy to exchange the ODD. For me it will be stupid to run around the world with laptop and four sides in the bag. What you can do is make your code free WEIRD but it is not legal and without a doubt, you will lose the warranty.

  Sorry, but buddy is a stupid situation. If you want to read interesting comments for this theme please use the search option on this forum and free region as search terms.

  Good luck!

• Qosmio F10: Recovery DVD does not work?

  Hello. I have a qosmio series lappy F10 series well well I still get random stops, crashes and error log every time that I start.
  It's been very disturbing to me. I tried to use the system recovery cd, that I got with my laptop and when I followed the procedure in the user manual it starts the recovery then flashes that my system does not support recovery.

  Is this normal especially when I had my restore disk with my laptop. I want to reformat my drive hard back to the factory settings and it was completely wiped out with having to buy a new hard drive and windows xp.

  What I do and how can you help me in this? I'm at the end of my teather as one of my tasks is a dj from the internet and I can't keep crashing in the middle of my streaming. I don't want to lose my job!

  Help, please!

  Hello

  Very strange! The fact is that you cannot use the different recovery CD because each recovery CD is designed for a Toshiba laptop model. For example, you can not use a Qosmio F10 on a Qosmio G20 recovery CD.

  However, I assume that you use the recovery CD provided (as you say) and the recovery procedure should generally work without any warnings or error messages.
  I think there is something wrong with the CD. Maybe the wrong CD was shipped with this laptop?
  I recommend to ask the Toshiba ASP in your country. Here, you can also order the new CD.

  Good bye

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• Qosmio F10: How do I reinstall the OS from the recovery CD

  Hi all

  I anticipate a full spring clean reinstallation of my Qosmio F10.
  I have all the CDs.
  Any advice on this frightening surgery would be welcome.
  Furthermore, what happened to reactivate Windows. I read that, as it has already been saved once, it might be difficult to rectivate it.

  Thank you in advance.

  Hello

  Recovery delivered image allows simply and fast installation of the software. After the installation of recovery, you don't need to make a record.

  1. simply insert the recovery disc into the CD/DVD-ROM drive.
  2. turn on your PC while keeping the 'C' key.
  3. follow the instructions that appear on the screen.

  All that s!

• Qosmio F10 does not accept my recovery cd

  My Qosmio F10 does not accept my restore cd. It will not work in windows or dos mode. In windows, I get the error message. This recovery and applications cd is not configured to work with this machine (laptop). This cd is for: Qosmio G10, Qosmio F10.
  Please use the correct recovery and Applications cd.
  I want to format this model and would really like to use the adequate recovery cd to reinstall all applications that I don't have a windows xp disc. Recovery, one is the only one I have.

  Hello Pam

  Insert the recovery media in the drive and turn off the laptop. Wait a second and turn it on. Press the C button and keep it down. On this track, the unit will start playback DVD recovery and if you use original recovery the recovery procedure will be implemented.

  You cannot reinstall the unit if the operating system is running.
  Good bye

• Qosmio F10 - the Qosmio player Partition Recovery

  I have a Qosmio F10. He had the motherboard factory upgrade, RAM max, and a new 160 GB Samsung HARD drive mounted. So far so good. I've recently updated to Win7 and it was OK, once the drivers have been found, but I couldn't reinstall the Qosmio Player because apparently he found too little space.

  Hotline do not have much help, but I now realize that the QP is a Linux package in its own hidden partition. I've cleaned the disc, which makes an image of the system W7 on a USB HDD. Then I managed on the basis of reinstall the QP and update her, but the image will not recover in the form of images of Windows, I find now, will only recover a disk the same as the original or more.

  It is not of course because of the score of the PS. So how is it removed please? I tried everything so far.
  Just to make things to complete the product Toshiba Recovery DVD sent with the repaired machine is 70% complete and abandoned.

  Stephen

  Qosmioplayer is small application based on Linux, and according to the instructions of Toshiba s, must be installed as a first step, before you install the operating system. I m not 100% sure, but about 200 MB of free space on the HARD drive is required for installation of Qosmioplayer.
  It works perfectly when you use original Qosmioplayer and recovery disks but I put t know how it will work when you try to use your own image.

  I hope that someone else has the same model of laptop and solution for this.
  If you will be able to manage this please send a feedback.

• Qosmio F10: battery life

  I have a Qosmio F10 (2 months) and am pretty disappointed with the battery life.
  20 minutes running on battery at full power yesterday and the computer was turned off (3%)...
  Forget watching a DVD on the plane!
  I wonder if it is a BIOS issue or if there is no possibility to buy a more powerful battery.
  It seems to me that this computer was designed to run on a/c with the battery pack in as a secondary power (short!) option.
  Any comments?
  Also, did anyone tried these plane Chargers sold in airports?

  Hello

  In my opinion, you should try to set up your Qosmio for optimal battery usage. To optimize the battery DURATION use the Toshiba Power Saver utility. "TOSHIBA Power Saver" allows according to the specific use power management allows the reduction of the power consumption of your device and allows you to use your PC for a longer period when running on battery.

  You can reduce your energy consumption PC mainly for its use by reducing the brightness of the screen LCD or CPU processing speed. There are also various games of management settings power or 'profiles', prepared in advance. These profiles are designed to be used in some of the most common environments of the user. You can use these standard profiles or create your own profiles based on your own custom power management settings.

  I'm sure that all the settings of this can help you to use the device for a longer time. To watch DVDs using DVD player profile. You can change the profiles using the FN + F2 key combination.

• Qosmio F10-125 TV tuner

  I just took delivery of a F10. Excitedly, I plugged the Jack on the back of the PC to the regular Arial and searched the signal by the auto scan the media Wizard. No signal has been detected. I tried to use the analog RF signal of my Sky digi-box, which must be a good sign that can be achieved. Still nothing. In both cases, coaxial cables carrying a signal healthy as evidenced by TV happily play all channels on the cable from the two sources

  Someone knows what to do? or this wonder Qosmio F10 is a joke!

  Post edited by: Ronaldat

  Hi Ron

  As far as I know that you use Composite in the port if you want to watch TV using Qosmio player. In this case, you can change the channel on your cable box and watch it on your Qoamio. In this case, Qosmio player should find a single channel.

  Composite in the port is for video and audio signals. If you use S - VHS to it's just for video signal without the sound and I don't know if it will work properly with Qoamio player.
  Please try again with Composite in the port. I am very interesting if there is some success.

• Qosmio F10: WinDVD creator

  Qosmio F10 is for sale with DVD creator, anyone who acquires an analog video with her

  I have a Qosmio (a G10) which came with WinDVD creator but I am unable to capture analog with her. I tried many programs of the trial and can't get something to recognize Tv Tuner or analog in.
  The Qosmio seems to purely through MCE

• Qosmio F10: How can I install Win XP MCE 2004 again

  Hello

  I have a problem with my recovery dvd - rom supplied with my laptop TOSHIBA QOSMIO F10. I bought in London, message of cams of upward on the screen error "\WINDOWS\SYSTEM32\CONFIG\SYSTEM / Windows didn't start because the following file is missing or damaged '

  But now I live in Brazil, so how can I install again my operation system XP MCE?
  Because I have the OEM software pre-installed in.
  Can someone help me please?

  Don t understand why you open a new topic!
  You have already posted this here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25711

• Qosmio F10 does not start system missing or damaged

  I have a Qosmio F10, and I use all the proper procedures for RECOVERY DVD-ROM PROUDCT.

  "I did all the necessary readers updates as well, but when I turn on the laptop came with an error message:" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  "Windows was not start because the following file is missing or damaged:

  So, now my computer with startup options start, but what that you choose the system starts again and again...

  What to do? Please, I beg you.

  Hmmm usually after using the CD recovery Toshiba, everything should work ok.
  I read on some computer expert sites that this problem could be linked to the hardware failure. The HARD drive or the module memory is possibly corrupt.

  I would first recommend formatting the entire HARD drive (remove also all partitions).
  Install the operating system again.
  If it does not solve this problem you could check if it is possible to install from the original CD of Microsoft XP.
  Further, you can see the memory modules. Try to remove one and use only one or replace it with a new one.

  But please note that these are just my suggestions and I m not 100% sure if these proposals will allow you to solve problems. In any case it s worth a try