QOSMIO F10: works slowly--> upgrade RAM?

Similar Questions

• Tecra 8100 does not work after upgrading RAM

  Hello
  I bought a kingston KTT-SO815/256 pc100 144 pin, did a 2.50.on of my Tecra 8100 BIOS update
  It still does not.
  In my BIOS total ram is ok, so the computer knows that it is in the slot B, but when I try to boot the computer to a blue screen appears necessary a bios update. (Already done) APCI is not good.
  Someone has an idea?
  Now there is in the slot A - 64 MB
  Tried to put 256 MB in the B slot
  them, that nothing worked changed

  Hello

  Well, the blue screen error message usually appears because of the failure of the software matter or material. In case you I guess, apparently because of the new RAM.

  The fact is that you can upgrade the memory to the maximum. 512 MB.
  These modules are compatible:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  I recommend that you check you modules and try to use another compatible.

• Fan on my Qosmio F10 works very often

  I just got my f10 back from repairs, the motherboard was changed.
  It also means that the graphics had put go5200 (I think, or was it 5700?) to a go6600.
  Now the fan is driving me crazy. No matter what I do, navigation or not even touch, regardless of the energy saving settings, the fan is switched on for about 2 minutes, followed with a second brake 30.

  Before repair the fan would not go on during navigation, that if the game or other demanding tasks.

  Is this a software problem or just my F10 is not done to manipulate graphics go6600 wise cooling?

  It's a really important question for me, be a recording musician, more or less the difference between a fantastic machine and a door stop.

  Any advice?
  Thanks to a bouquet.
  Jonathan Nilsson

  ?? It's a little crazy!

  > This also meant that the graphics had put go5200 (I think, or was it 5700?) to a go6600.

  What makes you think that? In the Windows Device Manager, it now says Geforce GO6600?

  Have you asked specifically for this upgrade?

  I never thought this to be possible.
  You bet that the fan now works at full speed at all times!
  The F10 was never designed for this vga card!

  I don't understand how this could have happened.
  He is a fan you can get here:
  http://users.PCNET.ro/SP/Toshiba.html
  However, I fear that this may damage your F10 because he is not a normal configuration with the Go6600!
  Incredible...
  Later,.

  Alcahest

• Quick start Intel stops working when upgrading RAM

  I have a laptop dv7-7212nr of nine ENVY running 64-bit Windows 8.

  This machine has Intel Rapid Storage Technology that caches the data on the hard drive (I think on the SSD of 32 GB) and active Intel Rapid Start technology that stores memory in the SSD cache (I think) when the computer enters a State of hibernation.

  The first thing I did was upgraded to 8 GB to 16 GB RAM.  It works fine, but then I get an error message "your system does not appear to be with technology intel quick ignition."

  HP provides very little information about it, virtually none.  I suppose memory is cached on the SSD, but I don't know how to check this.  I also noticed that acceleration is not enabled under the Rapid Storage Technology applet for the reader.

  I called tech support twice, but technicians knew nothing of the upgrade of RAM beyond the usual and couldn't do it worked either.

  Does anyone know yet exactly how the SSD is used in my system?  It would be valuable information for me.

  Thanks in advance!

  Third times the charm.  The tech 3rd to aware of this problem.  This motherboard has a 8GB cache forIntel fast boot technology.  You can upgrade the RAM to a maximum of 16 GB, but Intel Rapid Start will never work again.  So there you go.  I will return the 16 GB of RAM.  I saved a lot of money, because if I had ordered the machine with 16 GB was an another $300 (RAM on Amazon was $ 80).  But it is not really scalable.

  The SSD that appears in the management of the computer is the motherboard cache.  There is only a single drive on this computer.

• Why Windows Aero does not work after upgrade RAM?

  After that I recently updated my computer desk with 2 new modules 1 GB DDR PC3200 400 mhz 184pin RAM

  PROBLEMS:
  * Windows Aero stopped working.
  * Windows recognizes only 3.5 GB of RAM on 4.
  * Windows Experience Index will not refresh the WEI Score.
  Any help with this?
  I'm back to the old RAM modules and all is well, but whenever I update the last two RAM modules, these errors occur.
  
  MY RIG:
  OS: Windows 7 Ultimate.
  SR1830NX Compaq
  Max supported RAM: 4 GB PC3200 400 Mhz 184pin DDR (4 Slots of 1 GB each)
  Configuration of the RAM before upgrading (physical)
  SLOT 1: 1 GB
  SLOT 2: 1 GB
  SLOT 3: 512 MB
  SLOT 4: 512 MB
  (although she had 3 GB installed, only 2.5 were recognized).
  Configuration of the RAM after upgrading (physical)
  Slots 1-4: 1 GB each
  Configuration of the BIOS:
  Slot SCHEDULES 1,2 & 4: 1 GB in each slot
  SLOT 3: 512 MB (even if it has 1 GB installed in this slot)

  You seem to have a hardware failure with slot 3. See if there is an update to the BIOS of your card mother, but don't hold your breath. There may not be one and he will probably not correct the problem if there is.

  There is always to be small amount of RAM allocated to the system. Integrated video will be stick like a leech some as well as the network interface card. It's normal, regardless of the version of the installed operating system bit...

• Qosmio F10: After Vista upgrade common module blocked due to incompatibility

  I was wondering if anyone has a solution for this. I have upgraded to Vista ultimate and have gotten most of the things to work but on each startup, he said that the common module driver from Toshiba has been blocked due to incompatibility.

  Most of the things work it just seems to be media and SD reader card buttons that have no card.
  All ideas welcome.

  Hello

  This message appears because you have updated the OS from XP to Vista and common modules installed are not compatible with the Vista operating system.

  Is Toshiba didn't publish the drivers and tools for this laptop and it's why some features don't work.

  That's why I don't recommend to UPDATE the XP to Vista, but to clean install Vista on the second partition.
  In this case, you will be able to use the two BONES. XP and Vista.

• Satellite A110-260 does not work after upgrading RAM

  A110-260 - 512 MB Ram - 533 MHZ - 100 GB - BIOS V1.20 (2 years)

  Hello

  My first attempt to upgrade my RAM has failed.
  After correct installation of the 2 Kingston 1 GB of Ram (Typ: 2,800/1 GB SO-Dimm DDR 2 NMR), my laptop has not started yet, only 5 short sounds (in the owner's Manual: not the duty extended memory).

  Trinkets: 1 Kingston 1 GB - Ram mixed with original Toshiba 512 MB - Ram, Notepad starts, but reached only 896 MB of memory. Performance not signifikant better.

  Who can help me?

  Andi11

  Hello

  I think that simply there is a compatibility problem between the memory modules.
  5 short beeps that appear during POST is a common signal that appears if an error has been detected.

  I think you simply test the different memory modules.

  Big names

• HP Pavilion 11-n010 dx: Touch Screen NOT working after upgrading RAM

  I've recently updated the RAM on my HP Pavilion 2 in 1 portable from 4 GB to 8 GB and now the touchscreen does not work. I preformed a refresh on the PC when updgrading memory. Now, windows does mean no net or touch input is available. I updated and reinstalled the BIOS and this has not solved the problem. Any ideas?

  andrewstarr09 wrote:

  I solved the problem. I had to download the HP Support Assistant program again this orginially came with the PC. Downloaded once, I opened it and course and everything, but it was the new BIOS update that fixed I think. Anyway, the touchscreen works now. So if you do a refresh on 8.1 of Windows and your use of an HP product, Microsoft will remove most of the HP stuff and you have to reinstall them all yourself.

  It is good to hear that it works. In fact, Microsoft provides the touch screen driver, not HP. It is located in the directory DriverStore.

• Qosmio F10: Question about RAM upgrades

  Hello

  I have a laptop Qosmio F10, and it crashed in the summer 2006, so I sent it to Toshiba and changed it the motherboard. I got a new version with the nVidia card 6600 and I have 2x512MB PC2700S DDR - RAM (the one that came with it, the one I added).

  Recently, I managed to find a buyer for these Rams, to switch to 2 x 1 GB, so my question is: can the motherboard handle faster DDR - RAM (with 400 MHz instead of 333 MHz like the ones I have) or should I just stick with the same model (PC2700 - 333 MHz)?

  Thank you

  Hello

  I recommend you to install a program of diagnosis of equipment as Everest Home edition for example. Then check how fast the bus (FSB) front supports.
  If it s 400 Mhz or faster, then you can use the 400 Mhz memory modules.

  I hope I could help

  At soon amigo ;)

• Upgrade CPU on Qosmio F10-101

  Hello people,
  I tried to upgrade my Qosmio F10-101 1.7 to 1.8 GHz CPU, but the whole system runs very slowly.
  In fact, it runs up to 500 MHz and it is not possible to operate at full capacity.
  Finally, I went back to my original CPU, 1.7 Pentium chip.
  I think Toshiba is using a method to control the CPU serial number and reject any new CPU unless it is replaced by them.
  Does anyone have an idea how to make my notebook to accept the 1.8 GHz Centrino?

  Concerning
  Kypros

  Hello

  The fact is that after changing the motherboard or a unit firmware must be updated.
  Unfortunately, it is not possible to update the firmware for a common user.
  This can be done only by the Toshiba service partner.
  After this update the CPU has to work with maximum efficiency.

  I guess it's a question why the CPU works only with 500 MhZ

  Please check these messages:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12377&MessageID=47478
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=1513&MessageID=3563

• Upgrading RAM on Qosmio G30-204

  Hi people like many of you would know that the G30-204 works on 2GB of memory RAM.
  I would like to spend so the most I could probably install is that isn't a 2 GB?

  What businesses would be recommended?
  Is the RAM200pin?
  Its 533 mhz would be something higher cause a problem?

  Thank you

  Hello!

  Why you n check t your user manual? You will find the denunciations, al you want to know.

  However, the Qosmio G30 can be upgraded to 4 GB of RAM. Therefore, you must with 200pin laptop RAM and DDR2 533/667 MHz.
  I have good experiences with the Kingston modules. I always use for the upgrade of my notebooks.

  Good bye

• Qosmio F10 - DVD RAM mast * a UJ - 830 s firmware 1.0

  Hi all.

  My work takes me to travel regularly in several countries and therefore, my DVD drive is running out of parts.
  I thought the point of having a laptop to use it everywhere.
  Well well, not in this case.
  The irony is that it affects only DVD legal copies of inferior quality are region free anyway.
  I have 2 solutions: make the DVD in my final area, or buy disappointing copies.
  A research on carpet * a DVD RAM XX-8XXX came back many messages but no response.
  Change the disc completely work?
  I think that the film industry has completely missed the point, and I gave you a lot of money to get a product that is limited.
  Any idea?

  Hello Chris

  You are absolutely right about the mobility and I agree with you, but the problem is that the laptop manufacturers have no influence on this. Film companies are responsible for this circus. Cell phone manufacturers offer equipment for each region. For the European market, they must offer a driver of DVD that can read the code 2 and so on.

  Qosmio F10 is known to me and on this laptop is not so easy to exchange the ODD. For me it will be stupid to run around the world with laptop and four sides in the bag. What you can do is make your code free WEIRD but it is not legal and without a doubt, you will lose the warranty.

  Sorry, but buddy is a stupid situation. If you want to read interesting comments for this theme please use the search option on this forum and free region as search terms.

  Good luck!

• UPGRADE MEMORY ON THE QOSMIO F10

  IN CASE OF...

  HI, COULD someone EXPLAIN WHY SAME TIME MY LAPTOP (QOSMIO F10 1.7 Mghz, 512 MB RAM), POP-UP WINDOWS LIKE THIS "WINDOWS. INSUFFICIENT VIRTUAL MEMORY. "
  DO YOU KNOW WHAT THE BEST THING TO DO?
  I WAS THINK to be upgraded up to 2 GB of RAM, BUT I'M NOT SURE IF it will SOLVE THE PROBLEM...
  MUCH THANK THE OF FOR THAT ANSWER.

  Hello

  Well, I think that you can solve this problem without upgrading the memory.
  Please follow these steps:

  1. find out how virtual memory is managed. Right click on 'My Computer' and choose 'properties '. Click the Advanced tab, and then under Performance click settings.
  2. which opens your performance Options. Click the Advanced tab. For private users 'typical' Processor Scheduling & Memory use must be set to "programs".
  3. under virtual memory, click change.
  4. which opens the virtual memory options. If you have more than one hard drive, make sure that your primary hard drive is selected under "Drive".
  5. under "Paging File Size for selected device" check the box indicating the size of the managed system.
  6. click OK in all the 3 boxes to close off these settings and restart your computer

  Hope that this will help solve this problem

  Good bye

• Qosmio F10-136 VGA does not work with the INVENTOR

  Hi, I bought a qosmio f10-136, I use CAD/CAM software and when I started working on the INVENTOR he used to close, when I contacted AUTODESK they told me that my VGA is not certified for use with INVENTOR 10.0, I tried to update my VGA driver toshiba but Web site it still was usless, is there a solution for this problem?

  [Edited by: admin November 13 05 10:25]

  Have you tried to run the program compatibility Wizard?

• Qosmio F10: Recovery DVD does not work?

  Hello. I have a qosmio series lappy F10 series well well I still get random stops, crashes and error log every time that I start.
  It's been very disturbing to me. I tried to use the system recovery cd, that I got with my laptop and when I followed the procedure in the user manual it starts the recovery then flashes that my system does not support recovery.

  Is this normal especially when I had my restore disk with my laptop. I want to reformat my drive hard back to the factory settings and it was completely wiped out with having to buy a new hard drive and windows xp.

  What I do and how can you help me in this? I'm at the end of my teather as one of my tasks is a dj from the internet and I can't keep crashing in the middle of my streaming. I don't want to lose my job!

  Help, please!

  Hello

  Very strange! The fact is that you cannot use the different recovery CD because each recovery CD is designed for a Toshiba laptop model. For example, you can not use a Qosmio F10 on a Qosmio G20 recovery CD.

  However, I assume that you use the recovery CD provided (as you say) and the recovery procedure should generally work without any warnings or error messages.
  I think there is something wrong with the CD. Maybe the wrong CD was shipped with this laptop?
  I recommend to ask the Toshiba ASP in your country. Here, you can also order the new CD.

  Good bye