Qosmio G20-127: how to upgrade the GPU

Hello

I want to change the video card in my Qosmio G20 - 127 better one. Can anyone tell me, is this possible and what video card I can use.

Hello

I can tell you that this is not possible because the GPU is still welded on the map and it of not possible to remove it on an ongoing basis.

So unfortunately, but you o forget him!

Welcome them

Tags: Toshiba

Similar Questions

  • Qosmio F30-125 - how to upgrade the RAM?

    Hello

    I have a model PQF30E Qosmio and who seek to increase the RAM.

    I read that this model can take 2 GB max as opposed to the PQF32E which can take 4 GB.

    I have the standard 512 MB installed at the moment and when I open the back I have only a slot for expansion. Should I put a 2 GB upgrade in this slot I can not find a 1.5 GB upgrade or is it possible to delete the original 512 and replace with2 x 1 or 1 x 2 GB.

    Thank you
    Ben

    Hi mate

    What boarder said is right.
    The user manual provides information on the possible RAM upgrade and there is also an instruction how to put the RAM in the slots.
    Usually it s not difficult and can be done very quickly.

    View just the words to the subject of the upgrade of RAM max;
    It's material and limited to Intel chipset limitation.
    If you want to know how much RAM is possible then check your type of chipset and visit Intel for chipset details.
    In the datasheet, you can find the specifications of the chipset.

  • Qosmio F30-127: how to use the SD - no SD card reader icon

    Could someone how to use SD F30-127.
    I tried to get the image from my SD card.
    I inserted in the slot, but no drive ICON displayed

    Hmmm. Please check if the SD card has been recognized in the Device Manager.
    There should be no yellow exclamation!

    Another allusion;
    -Remove the SD card in the slot
    -Go to Device Manager and remove the SD card controller
    -Now reboot the laptop
    -After restarting again windows should recognize and install new hardware. It is a SD card controller.
    -Now, try to reinsert the SD card!

    By the way; have you used the format SD card?

  • Qosmio G20 - 108 - want to upgrade the graphics card

    Hiya,

    I've got a g20-108 and I really want to spend the nvidia card to something with a little more umph. I would just get a new laptop, but I like the machine, and I think that its worth the hassle. I was looking at the nvidia geforce go 6800 ultra 256 MB card but was not sure it was compatible. If any1 knows of a card that would be better or if it can be please let me no

    Cheers for any info

    Hi skimming_skinner,

    The problem is that this graphics card is not extendable part. That means t, you can exchange it with another model because it s fixed/soldered to the motherboard and nontradable.

    You can read about it here:
    http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  • Qosmio G20-127: failure to screen after closing the lid on Vista

    Hello

    I have a Qosmio G20-127 and I recently installed Vista Ultimate (32 bit). I managed to put everything in its place (except the magic buttons, but the drivers are not on yet), but I have a problem that makes me seriously reconsider coming back to XP MCE.

    When I close the lid of my computer, the screen turns off of course, but when I open again, it does not turn, but it stays black. And I can't turn it on again no matter what. I have to turn off the entire computer and it is quite unrealistic.

    Funny is that after a restart for about 20-30 minutes, I can open and close the lid normally, but the same problem occurs after a bit more time to work on the computer.
    The problem persists even though I disabled everything remotely connected to the closing of the cover.

    Does anyone have a solution?

    Hello English

    Try you update the BIOS on the VISTA OS?

    I can imagine you will always find something new and unusual, but please note that Vista is not supported by the OS for Qosmio G20 (Vista drivers are not available on the Toshiba download page) and you can expect that from time to time, you will discover new disturbing behavior.

    I recommend you to install and configure Vista as described in the topic of s Francisco, configure OS for your needs, and be happy if you use Vista without any serious problems. In my opinion, for OS installation and configuration software Qosmio is Toshiba laptop more complicated template, and you will never be able to configure it as a supported and preinstalled WXP MCE. Commands supported are tested and bugs are fixed, but not with Vista on Qosmio G20.

    Sorry my friend. Sounds stupid, but maybe that's just the truth. By the way: I like Qosmio G20. Maybe I'll buy one if the price is Ok.

    Good bye

  • Kingston KTT533D2/512 for Toshiba Qosmio G20-127 RAM memory

    I'll install additional 512 x 2 sticks of RAM in my computer Toshiba Qosmio G20-127. Someone has already installed RAM Kingston memory? BTW, how many RAM slots in Qosmio is? There are 4?

    Hello

    Just 2 slots are available. The device can handle with 2 GB max. unfortunately I can't tell you anything on the module of RAM Kingston, but the Configurator Kingston said that these modules are compatible should avoid any problems.

    Good bye

  • Disabling Raid in my Qosmio G20-127? !!

    Can someone help me how to disable the raid in my Qosmio G20-127
    Coz, I bought norton system works 2008 the Prime Minister, but I can not install the new 4.1 goback coz I have raid on my laptop
    & goback is important to me.
    Experts please I need your advice
    Thanks aloot

    Hello

    The RAID can be disabled in the BIOS!
    You must select the 3rd page of the BIOS, and then you will receive these options.

    How to enter the BIOS?
    Well, press ESC, then F1 immediately after that the laptop was turned on.

    But note; If you change the RAID option, you will lose all the data and the operating system must be installed again!
    For RAID details, see your user manual! You will find all the information necessary and important.

    Good bye

  • Drivers of WIDCOMM 5.0.1.1200 Qosmio G20-127

    Is it possible to install software drivers Widcomm Bluetooth on Qosmio G20-127? I want to use them instead of Toshiba and Microsoft Bluetooth stacks. I modified the btwusb.inf file in Widcomm 5.0.1.1200 with my own PID and VID (taken from the Toshiba inf file) but I'm unable to install the drivers again.

    Hi Alex

    You will be very happy if someone can give you a correct and precise response to this topic. As you know Toshiba doesn't support and test some third part software.

  • Qosmio G20-127: very strange noise coming from HARD drive

    so...
    I have a problem with my "hdd2" I believe that I have a Qosmio G20-127
    It all started yesterday... and now it's like this (http://www.youtube.com/watch?v=D3Pzea1xMR8) this noise that makes me sic.

    Please help me and tell me what to do to get rid of him...

    Thank you.

    You sound queue is no longer available ;(
    But if you're 100% HARD drive makes any strange noises, then you must create a backup of HARD drive.
    Several months ago my HARD drive died and the day before I noticed some strange noises. Today, I know it's HDD ;(

  • Qosmio G20 - 127 connection with plasma TV

    What is the best way to connect the Qosmio G20-127 with plasma Panasonic TV? Plasma TV has HDMI port. Should what cable I be able to connect to the HDMI port?

    Hello

    The Qosmio G20-127 supports a component port (D-video output port)
    You can connect you laptop to TV with a D-video cable.
    You can google a bit and you will find a lot of offers.

  • Qosmio G20-127: after that Windows update I can not see list fax and printer

    Description of the problem
    Model: Toshiba Qosmio G20-127
    Operating Sysytem: Microsoft Windows Media Center Edition

    After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

    I just installed printers.

    It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
    See this Microsoft Knowledge base article:
    http://support.Microsoft.com/kb/823447/

  • Drive necessary recovery for Qosmio G20-127

    Hello

    I would ask, can someone help my, I lost my recovery disc (Qosmio G20 - 127 Xp MCE) and can't download via serial on toshiba.com said that the old model.

    I put t know what to do.

    Thanks in advance :)

    Saved on DVD recovery disc recovery image can not be downloaded then don t spent yout time looking for him.

    You can download are all necessary drivers, tools and utilities and you can use if you decide to install the clean version of Windows XP Home edition.
    Problem is that this Qosmio is old enough and I don t think you will be able to order the new DVD of recovery for her.

    What you can try is to contact Toshiba nearest service and ask if they can get a Cie for you.

  • Need driver audio for Vista - QOSMIO G20-127

    Hi mates,

    I have a Qosmio G20-127 (PQG21E) series. I try to install Windows Vista, but I have no driver sound for this machine. If anyone knows the solution for sound please help me and send me a mail on [email protected]

    Concerning
    AZHAR

    Hello

    I do not have a Qosmio G20, but everything you want to know about Qosmio G20 and Vista you will find under http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=75318 or other subjects where FranciscoJr posted.

    Good luck!

  • Equium A210-1AS: how to upgrade the graphics card from 128 MB to 256 MB

    Hello

    can someone tell me how to upgrade the graphics card 128 MB to 256 MB on the Satellite A210-1as... thx

    Hello

    Update graphics card is not possible.
    The GPU chip is soldered on the Board and it of not possible to remove the sleeve.

    Good bye

  • 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

    I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

    How to pass the video?

    What cards are best for this system?

    What has changed in the BIOS or other settings I should do?  How can I get them?

    Thank you

    Art

    The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

    Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

    Please click the White Star of KUDOS to show your appreciation

Maybe you are looking for