Qosmio F50 - 10Z - use of several screens

Similar Questions

• Screen not switch on the Qosmio F50 - 10Z

  Hello

  Recently, I received my laptop Toshiba Qosmio F50 - 10Z (yesterday), I am very pleased with. However I seem to have a problem with the screen does not reverse when you start the laptop in sleep or hibernation mode. I tried to change the output screen (Fn + F5) but it makes no difference, and the laptop screen is always off. I need to cut my machine (5 seconds by pressing the button / stop) and restart manually. Then, the screen lights up again.

  It doesn't seem to be drivers updated compared to those I already have / preinstalled.

  I hope someone can help solve my problem.

  Thank you

  The story is really strange for me also
  I'm 100% sure that Toshiba provides new laptops and if you bought a laptop with a few scratches then you should blame your laptop for the same problem dealer

  Maybe the dealer of the laptop used this camera for a show or similar

  Welcome them

• Qosmio F50 - 10Z overheating - Cooler recommendations

  Hello

  My Qosmio F50 - 10Z Guard stops due to overheating. I think Toshiba then set up this kind of configuration would have kept this question in mind. in any case, I thought that the solution would be to get a notebook cooler, but the problem is that the Qosmio F50 fan on the far upper right side and most portable coolers have fans more near the Center. I would be grateful if someone could recommend a good portable cooler for this model (or any other solution to the problem of overheating).

  Thank you

  Rehan.

  Rehan salvation!

  I can understand you, but I have at this point, I must say that I have too many Qosmio F50. He models the F50-10B s and also has Core 2 Duo 2.26 GHz but it s quick model with GeForece 9700 M GTS (I know your model contains only 9600M).

  What can I say about this? Well, first of all, I love this laptop. I love the laptops with 15.4 screen so it s not not little and not wholesale. The design of the silver/black is absolutely nice with white lighting. Not the same boring design than on most other phones. All my games work well on this laptop.

  On the issue of cooling, Windows and Office, the laptop is very cool fan doesn t usually works. On my Qosmio laptop I m using two power modes:
  (1) profile of PowerSaver I use for Internet and office: here I defined the maximum processor at 75 State and as cooling method I put in battery. If I can put a lot of power and it s enough for Internet and office.
  (2) balanced: I use it for my games so I maximum cooling performance and the status of the maximum processor that I have set to 100%.

  Moreover, I clean my Qosmio laptop every 3-4 months using a jet of compressed air. This could blow out the dust from the cooling fans and so I don't have to disassemble the laptop. I think that's really good.
  Here, you can get more information about this topic: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

  If you have any other questions, please let me know! :)

  Good bye

• Qosmio F50 - 10Z revolves around 80oc degress

  Hi guys,.

  Have a very little bit of trouble with my Qosmio F50 - 10Z, the GPU (9600M GT) revolves around 80 ^ o ^ c degrees when using, the system has been cleaned with air compress and is in perfect condition of the art, I use the laptop on a table computer as well to ensure air flow.

  Thank you very much.

  AFAIK Qosmio F50 is old enough laptop model and if you use every day on base maybe is time for cleaning professionals. Compress the air is OK but more of dust is just inside and cold air and cooling rack may be blocked by dust.

  I've seen repeatedly disassembled portable and it is raise what it looks like inside after two or three years of use. In my old notebook I found cat s hair.

  What is with cooling fan? It runs at maximum speed?

• Qosmio F50 - 10Z Bios Update crashed - how a cmos reset?

  I have a Qosmio F50 - 10Z and prompted by toshiba I downloaded the Bios Update and started to install.
  My screen saver came and it crashed.

  Not turn off (even after pressing the power button for 15 seconds).
  The drums and then put back. Computer skills on but the screen is blank and will not boot to the top.

  Tried to take part to Flash the bios by removing battery cmos/rtc (whatever it's called) but cannot find the battery and got to the point where I wasn't ready to dismantle any more (nobody else never disassembled a?)

  Could not find information or diagram or picture where the battery has been on the net... manual really useless laptop)

  Found reviews records of crisis, but I don't know what that means.

  So, how to I reset the bios?

  Please help - you're my only hope.

  > So, now, I find the cmos/rtc battery (if it's rechargeable explains so why does not easily localized) removed, he persevered on in a more accessible place - always reset BIOS

  Removing battery RTC would not help reset you mate sorry to the ROM BIOS module but what you did was completely useless
  It seems that the ROM modules where the BIOS is stored, was not properly flashed or something went wrong during the flash procedure

  In case of bad you the mobo is unfortunate but I think that Flash module ROM once more with a disc of crisis could help solve this case
  But the fact is that flashing the ROM module with a disc of crisis can be done by a technician of Toshiba ASP.
  That's why I recommend contacting the guys in your country and ask for flashing ROM

• Qosmio F50 - 10Z with windows XP

  Hi all

  I just bought an a Qosmio F50 - 10Z to run a CAD program, which does not work with Vista, unfortunately. I would like to keep Vista and add windows XP in a Setup to dual boot with Vista BootPro.

  Everything seems simple so far, but I am a novice to what follows. Apparently, after some research, I learned to integrate a XP disc with the necessary drivers. I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the toshiba site then it is not possible to install XP at all.

  Is this true?, or is there anything else we can do? The interest to buy the laptop was running the CAD program (which only works on XP).

  Any help is very appreciated.

  > I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the Toshiba site then it is not possible to install XP at all.

  That's nonsense!
  Of course, you will be able to install Win XP but the point is that a lot of portable devices does not work with Win XP due to unavailable drivers or tools

  The XP drivers are not available on the Toshiba driver page, but you can find it on other sites.

  For example;
  Sounds and driver LAN can be downloaded from the Realtek page.
  WLAN driver Intel page or here:
  http://APS2.toshiba-tro.de/WLAN/

  Driver BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Touchpad driver can be used other mobile computer series

• Boot from the disk ESATA on the Qosmio F50 - 10Z

  Hello

  is it possible to boot from an external drive using the ESATA port?
  I have BIOS 1.60 installed but I don't see an option for ESATA?

  What a USB? Laptop is a Qosmio F50 - 10Z

  Thank you

  I think that it of not possible to start from eSATA. The BIOS should provide this type of functionality.
  I've never tried, but I think that's not possible.

  As far as I know, it must be possible to boot from a USB device.
  The BIOS does not support this then try it.

• Microphone does not work - Qosmio F50 - 10Z

  Hello

  I have a laptop Qosmio F50 - 10Z.
  For the past two weeks, the internal microphone of my laptop stopped working.
  Its working fine but suddenly stopped working. However when I plug headphones to the microphone and speaker slots pins, it works.

  But without plugging the headphones, it won't work.
  Its really annoying me.

  Advice and assistance is appreciated. Thank you!!

  Have you checked all the settings of the recording device?
  Click on the volume symbol in the taskbar with the right button of the mouse and choose devices to record option.

• Vista on Qosmio G20 - impossible to activate several screens

  Hi all!

  I have a QOSMIO G20, and I put on him, with very hard work, WIDOWS VISTA ULTIMATE.
  Everything work ok, just one thing make me in trouble... I have a Gforce GO 6600 graphics card and when I want to activate SEVERAL SCREENS, don t want detect my TV.

  I try to change your driver, but Vista say NO, this IS THE BEST DRIVER.
  I'm trying to change all the options in the NVIDIA Control Panel... nothing!

  Please, I need help! Maybe my graphics card is damaged? Is too old?
  When I connect the laptop with TV, I have sound on TV but no picture.
  All ideas are welcome and thank you!

  >... and when I want to activate SEVERAL SCREENS, don t want detect my TV.
  Can you please describe to us what you want to do exactly and how do you do that?

  It's a running application when you try to use several poster?

• Problem on the Qosmio F50 - 10Z card reader

  I had this problem for a while, he started with the original OS Vista 32-bit, so I decided to buy the cd to upgrade toshiba for windows 7, after the update level, everything worked fine, except for the card reader, regardless of how many times I have installed/uninstalled, installed the driver, it wouldn't work!

  So I used the recovery cd, not once BUT TWICE, and nothing helps I sent to repair.
  I received a message on a piece of paper telling me that it would work on the original operating system, I thought that they had something fixed.
  Then I used the recovery cd AGAIN and to my excitement thrown short to see any yellow explanation points I put a micro sd card (2 GB) that worked when I bought this laptop first and got no response.
  The biggest problem is that my warranty is now closed!, so basically, I've been HIT MORE, cause the memory card slot does NOT WORK and it wasn't a software problem!

  Any reccomendations?

  Hi karimtarek,

  Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and I m using the version of the driver on Toshiba page 1.00.29.02.
  You use the same version?

  In addition, it would be interesting to know if the SD card has worked once you have received the notebook service center back. Have you tested before or did you start installation recovery immediately?

  Have you tried different brands of SD cards? I always use the SanDisk Extreme cards because they did not no problem.
  In addition, you could try updating the BIOS. Maybe this works if you are using an older version

  Last but not least if it s does not always work and you think that it s a hardware malfunction, ask at the center of service again. If you speak a bit with technicians, maybe they can fix it as a gesture of goodwill.

  Good luck! :)

• Qosmio F50 - 10Z - how to set up the bar multimedia?

  Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...

  On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?

  Thanks for help

  Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19

• Qosmio F50 - 10Z - after update BIOS lit buttons do not work

  TEMPRO alerted me on an update of the BIOS - bios - 20090415092322.zip - for 32-bit Vista, published April 15, 2009 for my F50 - 10Z.

  Since then, the enlightened "buttons" at the top of my keyboard no longer work - including, annoyingly, the key to turn the light off.

  Is that what I can do at this point? I tried a system restore but it did not affect the BIOS.

  I agree with Akuma. Now, you can try to set the BIOS to default settings and also reinstall the package of added value.
  This package also contains command buttons utility.

  Perhaps after having reinstalled it everything will work properly again.

  Please send us a feedback!

• Qosmio G20-139: use the laptop screen to play on the Xbox 360

  Hi I have a question about the monitor function with the G20-139,

  I have an xbox 360 and would like to know if there is a way to use laptops screen to play on the 360 in high definition or composite mode using the monitor function. With the laptop came a composite cable at one end and a sort of headphone 3.5 mm at the other.

  I read the manual about the case and it does not work.

  Any help would be appreciated thanks

  Hello

  The port monitor - where you can connect with the composite cable can be used to display video from your digital camcorder, video game or VCR on the internal LCD screen. It can be used as a line-in port to allow the connection of a stereo device for audio input.

  In my opinion, you also need this cable to connect the Xbox to the Qosmio with composite cable plug-in software component.
  http://www.madcatz.com/default.asp?page=257&CategoryImg=Xbox_360_Cables

  Then to commence the Qosmio with the Monitor-in button that starts the Qosmio player.

  Good bye

• The use of several screens with the iMac (late 2009)

  Despite a few good support here to support the communities I'm unfortunately still not able to use my 2 Macs the best average.

  When you use the 'Cmd F2' keys on the main iMac everything seems ok, but the iMac display is at the head and

  When I press Cmd-F2 on the iMac screen only the bottum menu bar appears...

  Anyone know what are the exact steps to follow?

  What to start first?

  Thank you!

  I'm confused as to why you started another thread. Your original-> thread screen connect 2 iMac (late 2009) with mini DisplayPort

• Qosmio F50 - 10Z - fan cycling on and outside, even when idle

  My f50 is constantly the fan turns and turns off every couple of minutes, even when the computer is idle and does not run applications.

  SpeedFan shows that the GPU is constantly cycling between 55 and 65 degrees C even if there are no applications running (for example just after the start)-the fan kicks in at age 65, died at 55, and then slowly warms up again. The noise of the fan is noticeable (I don't think it's going full speed, however), and it is a bit abrupt and boring happen constantly and is not normal behavior. Core 1 and 2 on Speedfan are cycles between 40 and 45 C

  Outside temperature is 20 degrees, so the environment is unlikely to be a factor. I blasted air fan for dust (as much as you can because the f50 is not built to be taken by a user to the home page), but even when the fan runs at the output seems visibly warm.

  I am only drivers of toshiba running on the site (currently 7.15.11.7590)

  My main concern is that this will negatively affect the life of the fan. Am I being too picky or is there something else I could do?

  Thanks for the tips

  Hello!

  It's not easy to say what's the reason of this problem, I so a few questions:
  Did you install the laptop with the recovery disk or Microsoft?
  What operating system do you use?

  First of all, you should try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also, make sure that there is enough free space a tower the specifications that the air circulation is not blocked.

  I hope I could help a bit.

  Good bye