Qosmio F750 and external 3D monitor

Similar Questions

• Qosmio F750 and always 3D images

  When Qosmio F750 will be supported the rest of 3D images?

  You have already created another thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68960
  Recommend you to follow the discussion on thread to avoid some misunderstandings

• Qosmio F10 and external LCD

  I want to be able to get out my screen VGA Samsung 323 t its best resolution is 1280 x 768 is possible to get this resolution out of the F10? The nearest running 1024 x 768 (1280 x 720), but is noticibly infirior to my 1280 x 768 required.
  Any ideas?

  Hello

  I don t think that this resolution is possible on the F10.
  In addition the drivers for this device you will only find on the cd or on you site Web from Toshiba.

  Concerning

• How to connect Qosmio F750 to 2 projectors?

  I have a Qosmio F750 and 2 DLP projectors,
  a connected via RGB output and the other connected to the HDMI output via a HMDI/RGB adapter.

  I've set up the Nvidia control panel with 2 projectors with desktop across 2 projectors,
  both the value 1024 X 768. And then start windows Explorer by selecting a JPG image side by side 2048 X 768.

  The image is displayed on the screen with the two images side by side, projected from a projector, and the other projector displays the computer screen wallpaper.

  I want to display the image on the left on a projector and the other image on the other projector.
  How I set up correctly?

  Colinmeth

  I think you need some 3rd party software to do this:
  For example displayfusion
  (www.displayfusion.com)

• Differences between P750/05F Satellite and Qosmio F750/02Y?

  Hello
  I was comparing the characteristics between the P750/05F Satellite and Qosmio F750/02Y but I couldn't really grasp the difference.

  My guess would be only from the outside, perhaps the screen?
  On the card in the Toshiba website says as the Satellite battery last up to 5.5 h rather than 3.5 h on the Qosmio for some reason any!

  On the 3D, I'm not sure as it is said by Satellite can also be used with glasses but Qosmio on an external 3D TV...

  Can anyone help me pls. I really want to get one of them soon.
  The Satellite is cheaper $ 100.

  Thanks :)

  I like the Qosmio series and I would take the Qosmio F750.
  It of great multimedia laptop and if you want to watch 3D content without the use of 3D glasses then the F750 should be your preferred device.

• Portege M800 and external monitor Dynadock question

  I have a M800 connected to a U Dynadock docking station.
  I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

  I am running Windows XP.

  Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

  If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

  If someone could help that would be great.
  Otherwise, I would recommend is not to use the dynadock

  Sorry mate but I still don t understand what you are talking about what problem do you have?

  Is the Dynadock video drivers give you the ability to view a total of three screens.
  -L' screen of the laptop.
  -external monitor connected to the video port on the laptop (if available)
  -ewxternal monitor connected to the Dynadock

  In addition, you can use mirror Mode and Extended Mode.

  Mirror Mode creates an identical view between your computer screen and the external monitor
  Extended mode extended Mode lets you split your display on multiple monitors.

  These are the features that you can use with Dynadock

• How to connect the external Qosmio TV and VCR

  I'm nowhere with this are there instructions written on this.

  Best regards Walter Bisset

  [email protected]

  [Edited by: admin]

  Hello Walter

  I put t know what Qosmio model you have but as far as I know everything is described in s operating manuals. One of my friends has a Qosmio F10 and I checked manuals s use of his unit and in the page 154 (9-13), there is description how you can connect to external TV using S-video output port.

  Good luck!

• Qosmio F750 - CUDA driver problem and display

  Hello

  I do computer scientist parallel with my Qosmio F750, but I am unable to run CUDA database test, called "bandwidthTest.exe". It returns the following error:

  cudaGetDeviceProperties return 35
  -> CUDA driver version is not enough for the version of the runtime CUDA
  ...

  I did some research on this problem, and everyone agreed that the driver of my screen should be updated. I already 290 driver version, but the latest version is 301,24. Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?

  What can I do to fix this? I don't want the certified driver for Toshiba... I want just a standard NVidia driver.

  Thank you for all the efforts made.

  > Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?
  With computers, you mean laptops or desktops? I put t know where to work but I guess in your company or school where you work is THIS Department. Contact the people who work there and I hope they can help you with the explanation why you can't use the NVIDIA drivers.

  There is big difference between desktops and laptops. Desktop graphics cards are supported by the manufacturers of graphics directly, but on mobile units are mobile manufacturers.
  There are several reasons for this.

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Qosmio F750-10N - question on 2D and 3D display modes

  Hello

  I recently bought a Toshiba Qosmio F750 10N and it seems that she has two display cards and can support different resolutions in 3D and 2D mode.

  Is anyone aware of how go in 2D only mode to access a slightly higher resolution to 1366 x 768 capable 3D mode? None of the software control panels seem to be able to switch to 2D only mode in order to access a higher resolution.

  Of the product - the following internal video modes are supported: resolution: 2D mode: 1920 x 1080, 3D mode: equivalent to 1366 x 768

  Look forward to any assistance.

  Concerning

  Post edited by: neural

  Hello

  I agree with Akuma.
  Go to display properties.

  Make a right click on the desktop allows you to change the theme and the resolution of the screen.
  You can also click the Customize option after right clicking on the desktop and in the lower left corner, click on the option called display.
  You will find the ability to change the resolution.

  Notes; the 1 920 x 1080 is only available in 2D mode.

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• Qosmio F750 screen replacement problems

  Hi all

  I hope you can help me,

  I just replaced the display on my Qosmio F750 which unfortunately took out of warranty two weeks ago so I do not qualify for support.

  When I replaced the screen I followed all standard procedure to replace any screen,

  But for some reason, now, the screen didn't come on come (everything works when plugged into HDMI).

  There is no backlight or image on the screen, I tried mounting the old screen and that also does not work.

  Any help at all would be much appreciated.

  Thank you all,

  Gavin

  Hello

  Are you sure that the new screen is OK and compatible?
  The screen is connected correctly?

  I guess there is nothing wrong with the motherboard or the graphics chip because the external monitor seems to be OK.
  That's why I think that it s to display either a connection problem, or maybe you used wrong or defective.

• Qosmio F750 - 12 p / BD - RW Pioneer BDR-TD04A - Bluray discs will not play

  Qosmio F750 - 12 p
  BD - RW Pioneer BDR-TD04A
  Windows 7 Home Premium

  Problem: Bluray discs will not play. CD will play.

  History: I did a clean install of Windows 7 and then installed 60 all the drivers from the support site for this laptop model. Or at least those that would install. Interestingly, the driver of Toshiba Bluray would not install. the installation process stated "player not found on your system" or something like that.

  What works the device currently is a 2006 (?) Microsoft driver.

  Clues? It's the second Toshiba laptop, I had to (second-hand), and they both had this problem: DVD players do not play DVD right from the start. Very annoying.

  Update:

  The "Bluray driver" mentioned above is just the own DVD from Toshiba software. It is not a driver. And it does not find the optical drive Bluray on my laptop!

  - The Bluray optical drive will play DVDs, but not of Bluray discs. I'll borrow an another DVD Bluray at the local library, to ensure that it is not a disk failure.

  -The Wifi does not work ("network controller driver is bad / missing")

  - I probably deleted the hidden partition that contains the Toshiba "system recovery disk". I have re-installed Windows and written too. [You are supposed to press "0" when the power, but it does not show the Toshiba Recovery console. I scoured the hidden with a freeware Windows partition and there is nothing usable here.]

  It is a stupid economy, not providing a system restore disk AND do not provide drivers download work. (The drivers offered on the site are simply updated). It makes the laptop value much less long term and creates bad word-of-mouth over time.

  The only station I have is to buy a Blu - Ray external drive and perhaps a Wifi dongle. Crazy.

• Qosmio F750 - how to change the graphics memory dedicated to 2 GB...

  In order to get my Qosmio F750 ready to run some games, I've updated all the drivers on via the toshiba Web site and the NVIDIA site also the software downloading. This includes upgrading the BIOS to version 2.00.

  According to the [laptop specifications given on the Toshiba site | http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications].

  I should have the following allocation of memory for the graphics:
  "4095 MB Total: 2048 MB of memory dedicated + 2047 MB shared memory.

  When I check the window Information on the performance and tools, I'm getting shows the following information:

  Graphics
  --------------------------------------------------------------------------------

  Display type card Intel(r) HD Graphics 3000
  Total available graphics memory: 1 696 MB
  Dedicated graphics memory: 64 MB
  Dedicated system memory: 0 MB
  Shared system memory: 1632 MB
  Display adapter driver version: 9.18.13.1422
  The primary monitor resolution: 1366 x 768
  DirectX version: DirectX 10

  Of course, when I look at the specifications of the laptop, I realize that the current graphic memory allocation matches the economy power Mode i.e. allocation of graphics when running on battery

  Normally, it would be nice, however, I don't see any change in the displayed info even when I'm running on current alternative.
  I checked all my power settings, but even when everything is set to "performance mode", the information displayed is the same.
  I try to look in the system bios to change manually the graphical distribution but none this option doesn't exist. Rather all options are defined in performance mode...

  So my final question is, * how can I change memory allocation performance mode graph as it is stated in the specifications of the system? *
  Is this something that happens automatically without changing the displayed Info?
  Is there a driver that I forgot to update? An update of the driver caused cela?
  A BIOS update caused this?

  On a side note, the audit of the DirectX Diagnostic tool, I have the version of directx is displayed as version 11. So I thought that the problem was with the displayed information. But even on the Diagnostic tool gives me the same information.

  I would be very grateful if someone could help me with this.

  Thank you
  Jean-Pierre

  Hello

  This is controlled automatically by the graphics driver.
  If the application that is running would require more RAM (IE game), the graphics card would control this value and I would add some of the memory to the memory of the graphics card.