Qosmio G25: editing DV PAL using WinDVD

Similar Questions

• Qosmio G25: Restore UK disks can work on machine USA?

  Hello
  I attended college in the United Kingdom since last September. Has decided to make use of the Easter hols to start on my Qosmio G25 (G30 to the United Kingdom). Unfortunately restore 2nd disc (3rd if count you the disc from the Qosmio player) has a read error.

  I've been in contact with a very nice toshiba service representative, but he says that records UK will be dependent not on a machine of USA due to the identifier is different (CMOS/processor or m/Board).
  Another that ask my brother to ship the original for me disks (I travelled with the backups that I did), the only thing I can think is to try software retreival data on the failed drive and burn a new disc.
  I'm off to a friend to do once I have validated.

  If anyone can shed some light on how to use a disc of UK to recover my system, assuming that it is a question, it would be great.

  Hello

  I don't really know if it will work. I heard that the American units have support different recovery check and if the drive is not the right installation is not possible.

• Activation microphone Qosmio G25

  Hello
  Unsuccessful so far tried to activate the built in mike as well as a plug-in of mike in spite of tweaking the settings of Soundmax.
  Any ideas?
  You want to use Skype on the mobile phone.
  See you soon,.
  Peter

  Hello

  I'm not very familiar with the Qosmio G25 because this device was designed for the American market.
  I'm not 100% sure if the internal MIC is available on this unit.
  But if the internal MIC is available so normally, it should be possible to enable this device in the Panel of control under "Sound and Audio device.

  The other side, you can use the external mic.

• Qosmio G25: Vertical lines of pixels blocked

  I have a huge problem with my Toshiba Qosmio G25:

  My LCD has 2 lines of pixels blocked, one pixel wide, going from top to bottom. Before we continue, I want to point out that my computer has not had any physical trauma of any kind and is usually used as an office.

  Everyone knows about this problem? Is there any miracle solution that I can handle it on my own or the only solution sends on laptop computer for the service? How the problems like that managed, toshiba will replace the screen or that they will completely replace the computer? I'd much rather prefer rather to solve this on my own with your suggestions as opposed to a long wait on the service.

  All of my school work depends on my computer and I would be helpless without him for several weeks. Please if someone has experienced this problem and it is resolved, I'd appreciate that they could share their experience and knowledge.

  Thanks for your time.

  Hello Makaroni

  It is not easy to say if this happens due to a malfunction LCD or even faulty graphics card. You can check its operation with an external monitor to see if the problem persists.

  In any case I put t believe you can do anything on your own, especially if the graphics card or the LCD is faulty. The hardware must be replaced. I know it's very annoying, but I recommend you contact the service in your country. Save all your data on USB and try to finish your work on some PC friends.

• Qosmio G25: Dust seems to accumulate behind my screen?

  Hello

  I use my Qosmio G25 for half a year now and over time, it seems that dust has been implemented behind my screen. It's not pretty to look at because it weakens my screen contain the dark spots. In fact it is not behind my screen, but between the screen and the protective layer that covers.

  I have beared to live with it, like two months now, but recently, to my surprise that I even found an eyelash taken down there.

  Does anyone have the same problem as me? Is there a way to remove the protective layer and clean the strainer, cause that it becomes a problem.
  Hope to hear from you guys...

  see you soon
  Dave

  Hello

  There is not really a way to do so without possibly damaging the LCD. If your computer is under warranty, I advise to take it to your authorized service provider and to replace the LCD screen. I remember the dark spots in LCDs are contained in security LCD which makes replaceable under warranty. Otherwise, you can try to clean behind the protective layer, but I don't think it will change anything.

  Hope that fix you and have a nice day.

• Qosmio G25-AV513: Windows XP and SATA HD RAID?

  Hi, I own a Qosmio G25 - AV513 (and HD Serial - ATA), and I am trying to install windows XP Professional. When I start to install, she prays for the scsi driver. I provided a usb floppy driver, which is always pressing S as requested. After installing windows begins, just after formatting my HD, it asks that the TOSHIBA RAID driver again. The problem is that now, it does not recognize the USB (I think), and it does not read the driver.

  What should I do?

  Hello

  Well, it s a strange question.
  Try to disable RAID in BIOS. Then try to install Windows Xp.
  After this procedure, if the operating system is running, select the RAID and install the drivers for the operating system.
  I m not 100% sure it works because I use only the recovery CD to recover the device, but you can try it.

  Hope this will help you.

  PS: Please check out the other topic on this strange problem.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7218&TSTART=15

  Good bye

• Qosmio G25: blue screen of death in the course of watching TV

  I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

  Does anyone else have this problem?

  Kind regards
  Stephen

  Hello

  AFAIK the Qosmio G25 was designed for the American market.
  All laptops that end in 5 are for the U.S. market.
  However, it is not easy to say why it happens.
  I assume you are using the image of Toshiba's own operating system.
  I checked the driver Toshiba U.S. page and found a few drivers.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

  You can check that you have installed driver TV tuner driver and BIOS versions.
  Maybe a BIOS update will help you.

  But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

• Qosmio G25-AV513 CD/DVD does not work anymore

  Model: Qosmio G25-AV513

  CD/DVD drive will read/play all CDs and DVDs, but does not burn, Help!
  Ive Tried: uninstall, reinstall the Cd/Dvd driver, using the brand different cd burning programs, activating/deactivating the drive. Help! Please

  In my case the removal of the upper and lower registry filters helped get the CD/DVD is working again.
  You should try this:

  -go to the Device Manager and remove the drive from the list CD/DVD
  -Start the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -restart the laptop.

  Like I said it was very useful for me. Maybe it helps you too.

  Good bye

• Need of replacement of CD/DVD for Qosmio G25

  Hello everyone

  I have a Qosmio G25-AV513. This is very similar to the G20. It is out of warranty. The Dvd/rw drive is a carpet * a 845 s. The trouble started just after a year of purchase. After a complete system restore and update the reader has a very unpredictable reliability with optical media. The brands it has previously burned without problems now are not recognized or fail with the error "power calibration".

  I went through the administrative service, various burning software settings, revising flash's 102D. Various resources on the net show that the other laptop brands that use this model reader also suffer these problems. I'm therefore looking to confirm a suitable replacement disk. I have taken note that the master/slave jumpers may be hard together.

  If you are looking for a replacement, that I fell on the Panasonic UJ - 85J. Can anyone confirm this or another drive as a replacement right? Although I would like to keep away from the mat * a readers.
  Pointers would be appreciated, it's not fun drag an external drive.

  Tony

  Hello

  > He previously serious with no problems are currently not recognized or fail with the error "power calibration".

  The power calibration error because the lens of the drive cannot calibrate in the correct position and that's why the drive can't handle the different CD or DVD.
  As you assume already that the drive needs to be replaced

  All compatible readers should be mentioned in the manual of the user who is always pre-installed on Toshiba laptops
  Take a look here.

  You can also try to contact the ASP in your country. You can order each taken part supported and compatible with the service partner
  In my opinion it of a safe way to buy a really compatible player

• Qosmio G25: Qosmioplayer TV button function change

  I have a Qosmio G25, but instead of switching to the analog tuner Qosmioplayer key I want to turn on my hdtv usb device. Is this possible?
  Any help is appreciated.
  Thank you

  Hello

  I agree with Quad. Just reply: not possible :(

• How to use "Sélective" and "Color range" in the edition of video using Photoshop CC

  0 down vote favorite

  I am very familiar in the use of "Sélective" and "Color range" on the image, but not on video. I have a video with a few yellow flowers moving because of the wind. I want to make this black and white video and change the yellow color of the flowers in red. I can manage to do everything except to change the yellow color in red. It is very simple on the image editing because I used to use "range of colors" to have the mask that contains all the yellow and then apply a hue/saturation layer on this mask. If I want to use the same logic on a video, I should have a layer to "color range" which create a mask dynamically on all video frames but I don't know how to do in Photoshop CC and even if it is possible. Can someone help me? Is there a simple way to do it? Thank you.

  Best done in Adobe After Effects

• Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Hi janeslens,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.
  • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

  Let me know if it helps.

  Kind regards

  Tanuj

• You can edit pdf files using Acrobat Reader or do you need to upgrade?

  You can edit pdf files using Acrobat Reader or do you need to upgrade?

  Hi juanj50577838,

  You will need Acrobat free trial download Adobe Acrobat application | Acrobat Pro DC to edit PDF files: using Acrobat | Edit PDF files.

  Kind regards
  Nicos

• I don't have the Edit option when using my iPad

  I don't have the Edit option when using on my iPad

  The forum of cloud is not on the use of individual programs

  The forum of cloud is on the cloud as a delivery & installation process

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll

• Cold Fusion Developer Edition can be used to develop the product and deliver to the customer

  Cold Fusion Developer Edition can be used to develop the product and deliver to the customer

  The limit of two IP resists don't not to, the EULA for ColdFusion legally using Developer Edition keeps you in any production environment.  Use it for development is very good, however.

  -Carl V.