Qosmio G30 - 163 stops sending the signal HDMI

Similar Questions

• Qosmio G30-161: cannot receive the signals of TV in MCE

  I recently bought the Qosmio G30-161 and have problems with watching TV via the media library. I get an error message that there is no signal. However another TV tuner I installed separately I'm not having any problems.

  I read somewhere that this could be solved by installing the last disc of tv tuner. If anyone can confirm this? If Yes, when I try to download the player from Toshiba online support, which comes in a file zip, after extracting it I don't see an option to install it.

  Thank you

  The second TV tuner installed on your Qosmio?
  Have you tested to receive TV signals without the second tuner but only with Qosmio internal tuner?

• Qosmio G30 - 163 - can I update the graphics card?

  Hello

  I bought a new monitor for my PC Toshiba Qosmio G30-163.

  The screen is a Samsung SyncMaster 305 T more. Link: Samsung SyncMaster 305 T more: DSB http://edbpriser.dk/Products/Listprices.asp?ID=447236&searchArea=products&Soege = samsung
  The screen has a resolution of 2560 x 1600.

  My problem is that my laptop Toshiba graphics card can run an og resolution 1900 x 1200.

  Is it possible for me to buy a new graphics card and insert it into my Toshiba laptop?

  -So, I'll be able to run the resolution of 2560 x 1600 of the screen of my new...

  If so, what graphics card will recommend you?

  Kind regards
  Tobias Storm

  Hi mate

  Unfortunately, the graphics card is not editable in most cases, it welded s and he a part of the motherboard.
  But even you would be able to remove the chip on board additional parts like BIOS, etc. would not address the new chip.

  Good bye

• No internet connection but the status is "connected" - Qosmio G30-163

  Why can't internet connection through some wireless networks, and never through the connection to the local network, even if the State of the connection is "connected"?

  I have a Toshiba Qosmio G30-163

  In the Manager of peripheral devices, network cards, there are two yellow mark points (next to "Other devices" and "Multimedia video controller")

  I made sure "Obtain IP address automatically" is a selection and "Obtain DNS address automatically" is selected as well.

  the IP address of my computer is 169.254.xxx, x, and I read somewhere that this indicates that there is no connection to a DHCP server and probably no connection at all. I was not able to renew the IP address.

  To repair internet connection doesn't work. I get the response "Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address." "For assistance, contact the personal who manages your network.

  Thank you

  Anne

  Try turning off the Windows Firewall. Or if you have installed a lot of 'Internet Security', reconfigure or disable the firewall.

  Update the BIOS and make sure have the latest network drivers and wireless installed.

  Try another browser such as Firefox or Google Chrome and verify that the Proxy settings are correct (if you are behind a proxy).

  Go to a command prompt and type: IPCONFIG/all
  If you see a gateway, you must be connected to the Internet.

• Qosmio G30-163: bad reception TV using the media library

  Very fuzzy TV reception gives my Qosmio G30-163. I use the Saudi Arabia country setting in the media library. I tried to connect to another air outlet that I know my TV works with the classic but that was still fuzzy, so is not the antenna for sure Jack. Any help appreciated.
  Thank you and best regards.

  Have you chosen the right settings to PAL/NTSC?
  Please check this box.

  For the most part these incorrect settings are responsible for bad reception of the TV signal.

  One question;
  Have you tried to update the TV tuner driver? Should do!

• Qosmio G30-163 - Installation Bluetooth - wedge several times to 10%

  It is a double issue.

  I have a Toshiba Qosmio G30-163 under MCE XP SP3. I am re-install the drivers after a corrupted registry problem.

  The laptop has Bluetooth hardware installed. I downloaded the latest Toshiba BT Stack s/w for XP and I'm trying to install it. I have so far. Installation takes over at the helm of the 99%. Then another window opens "Install Bluetooth Drivers". It has a blue progress bar. It stops at 5 bars = 10% full. It hangs there - although there is considerable activity on the main hard drive. Finally, I cancel the installation. The main installation window responds with Installation. But the BT service is not running.

  I raised a ticket with Sitecom, but the response has been to remove all the drivers because the dongle is just plug and play. This is false. The unit will not work without the drivers!

  I am also installing a dongle Sitecom CN 516 Bluetooth on my Acer Aspire One 532 h running Win 7 Starter. I try to install the latest Toshiba BT Stack s/w for Win 7 (32 bit). Yet once that seems to happen at about 99% completion. Then another window opens "Install Bluetooth Drivers". It has a blue progress bar. It also stops at 5 bars = 10% full. It hangs there - although there is still considerable activity on the main hard drive. A popup window opens then 'Insert Bluetooth Device', I have in fact already done. I click OK. Five minutes later the same popup window appears asking once again the BT device to be plugged. I click OK. It is repeatable. Finally, I cancel the installation. The main installation window responds with Installation. But the device does not work.

  What goes wrong if it pleases you, and how do I me BT to work in both scenarios? Thank you very much.

  Hello

  The laptop is already equipped with an internal BT module.
  But the BT module must be enabled in order to complete the installation procedure.
  Please use the key combination Fn + F8 to active the BT, then check if the bar progresses.

• Qosmio G30 - 163 - cold start takes more than 5 minutes

  Recently my Toshiba Qosmio G30 - 163 aged only 4 months takes a boot cold (from Qosmio Logo) 5-10 minutes of connection Windows users... I already used the disk recovery and reformatted the second drive, remove any software, but there are still more than 5 minutes at startup. Can anyone help?

  It's nice that you have installed OS again, but we don t know what applications do you use for you personal configuration. Is your laptop connected to the local network in the business or you use at home only?

  Here in the forum, it is not easy to say something concrete, because nobody knows how you have configured your Qosmio. Of my friends a Qosmio G30 and start taking some time but not so long.

• Qosmio G30-163: Core Duo T2500 Core 2 Duo T2500 processor upgrade?

  I have a Toshiba Qosmio G30-163 which has 2.0 GHz Core duo. That I wonder if it is possible to change this processor to processor core 2 duo at the same speed or maybe a lil faster since the duo core 2 CPU produced less heat than core duo, I've heard...

  Is guaranteed get trashed if I pay an official toshiba service bureau to replace the cpu?
  Why I want to change the processor is think about running 64 bit OS that is not supported by core duo cpu, core 2 duo CPU does support 64-bit...

  Hello

  Of course, everything is theoretically possible ;) but practice isn't very easy.
  To my knowledge, Toshiba doesn't support any replacement of CPU and upgrades and so I don t think you will get a new BIOS specially for this laptop.

  The F30 seems to be a new laptop. Therefore, you must know that you will lose your warranty if you open the notebook and remove the CPU!
  In my view, it is not worth

• Qosmio G30-163: encoder Windows media does not recognize video devices

  I can't get the Windows media encoder to recognize my video camera connected to the S-video (Qosmio G30-163) port.

  I have a similar problem with Web conferencing pro application Marratech (it crashes after 15-20 seconds if I try to use it-during the time the application is inactive - in configuration I see the photo/video test).

  If I use InterVideo® WinDVD Creator 2 Platinum software packaged for video capture it works fine.

  Hello

  In my opinion there would be something wrong with the compatibility of the MCE and s-video. Have you tried to run the MCE updates?
  If the s-video connection works with InterVideo WinDVD Creator, then I guess there is no hardware malfunction (s-video port).

  How about the video and the port? Have you checked if it works?
  This port allows you to import video data from analog video camera.
  I recommend you this option

• Replacement adapter for Qosmio G30-163

  Hi, I inquire about part No. PA3237E-3ACA (adapter for my Qosmio G30-163). Due to damage I require a replacement but am unable to find this component on your Irish site. Can you direct me to the component, or an equivalent as I required emergency. (go away)

  Any help appreciated

  If you don't have a lot of time, please contact the partner in your country. Maybe they can order one for you in a very short time.

  Addresses and phone numbers, which you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• Small icons on Qosmio G30-163

  Qosmio G30-163, letter and icon seem so small.

  With a resolution of 1920 x 1200, it is nothing unusual. Am I wrong?

• Qosmio G30-163: WLan signal is too weak

  Hello

  I have a new Toshiba G30-163 with Intel Proset wireless 3945ABG card.

  My internet connection is broadband via a Linksys router, and the router is away from the 2 rooms.

  It fluctuates between 2 bars bars 0 signal and changes between 60 kb/s and 6 KB/s download speed. The fan will also complete whenever I try to connect to the internet.

  I have places than an old portable Satellite of 4 year next to my laptop and it picks up 3 bars of signal.
  My neighbour is able to get 3 bars signal also on another laptop (at about 20 meters).

  1. I installed the latest drivers from Toshiba without change.
  2. I have installed the latest drivers and software from Intel Proset and Toshiba with no. change (V105159 and Toshiba 1050174) and (V10.5.0.3 of Intel)
  3. I turned the power to Max on map Proset to no effect.
  4. I disabled power save also, but now that the internet option disconnects more frequently.
  5. I bought a card Linksys thinking that it would be more compatible with the router, but no change.
  6. I get full signal - 5 bars - when using the laptop next to a strong WiFi area.

  So in summary.
  Two other laptops, an old Toshiba, one can pick up a signal of great connection - one next to me and the other as far.
  I upgraded to the latest version of the Intel Proset software and drivers and always poor-to-no signal with signal falls.

  I wonder if there is a way to test if the problem is something else on the laptop, statuette etc.?

  Any ideas please?

  Thank you

  Brian

  Hello Savo

  I understand your problem, but I have a question. Your Qosmio there so weak signal just with the home router? I realized that the signal is good enough when it is connected to another router.

  If a friend you have WLAN router at home, try to test it. The strange is that the Linksys card shows the same result. Because of this, I guess that problem is not the laptop WLAN card feature.

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• Qosmio G30-163: HD-DVD player will not recognize the Matrix Trilogy

  It is the last issue. WinDVD HD crashes after playing the opening for Blood Diamond and The Island WB logo. I posted a message about it, but it disappeared.

  Anyone know when the last update is due? He has not been one since December 26.

  Thks

  This post initially you're talking about? :
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=95884#95884

  I have checked the European driver of Toshiba page and chose the Qosmio G30 PGQ31E series and found the update to the most recent Firmware for HD DVD-R + r DL DRIVE (SD-L902A) and for the readers of disc-DVD-HD TS - L802A.
  There are two different firmware updates.

  In addition, I would recommend looking for an update of the HD DVD player. It of necessary.

  Toshiab HD DVD player update was published on the Toshiab driver page. Update!

• HDMI is not send the signal on external monitor once the laptop awakens from his sleep

  I have my TV as a second monitor for my laptop. I connected via HDMI. Once I leave my laptop a little past in mode 'sleep' and the screen loses the connection. Once I wake up the laptop, the monitor is not turning back on my desktop. It remains off. I disconnect and reconnect the HDMI and it does nothing. During this operation, my laptop screen flickers as when he connects to it, but nothing happens. My TV does not receive the signal, but the laptop says it's connected. What can I do to fix this? Thank you

  PS. I have to restart my laptop each time to allow to work my external monitor.

  Right-click anywhere in your option chart click homepage > output > and choose computer laptop + moniter