Qosmio G30 - 175 - need a good market 17 inch screen

Similar Questions

• Qosmio G30-175 - where to find RAID driver for Windows 7?

  I have a Toshiba Qosmio G30-175 and I need raid driver so I can install Windows 7. My operating system is XP and on Toshiba-home page, I can't find the driver.
  Can Enyboby please?

  Kenneth

  Hello!

  Have you ever tried the Vista driver? If this isn't the case, you need to test, because most of the Vista drivers are also work on Windows 7.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I hope it will work for you, but you can give us feedback on this subject. I think it could be interesting to other people, too. ;)

  Good bye

• Qosmio G30-175: screen starts flickering pixels & funny

  Hello

  I have PC laptop Toshiba Qosmio G30-175. I was working fine until last week. But all of a sudden screen looks funny disappeared.
  When I start the laptop, it starts well and windows start too thin.
  But a few early screen minute flicker and everything on the screen disappear and all the screen do cover with kind of pixels.

  Could someone please advice me, what went wrong for this laptop. Is the motherboard or card went graph.
  If so, how can I get it fixed at a great price.
  Is it possible to change the graphics card.

  much thanks

  Hi mate

  I think I have bad news for you.
  According to your description the graphics card chip begins to malfunction, and I think you have only one chance to solve this problem; the defective part must be replaced!

  I would recommend so contact the nearest authorized service partner in your country and ask for later handling.

  Sorry mate but it isn't alternative :(

  Good luck

• Looked for a driver updated - should I all? Qosmio G30-175

  Hello people, new user here Toshiba.
  Last week, I bought a Qosmio G30-175. After an installation of Bluetooth problem, all right.
  I updated the BIOS updated today v1.70 (even if the version of Windows would not work)!
  I thought I'd do a search updates of pilot and I find 86 updates appear!
  Someone could tell me if all of these updates are only available for use, or my laptop especially requires all these updates?
  Thanks in advance.

  Hello

  What? 86 drivers?
  Are you sure? I checked the driver Toshiba Qosmio G30 - 175 page (PQG30E) and found only 50 drivers for Windows XP MCE.
  But two entries in the list of 50 drivers! For example there are 2 BIOS, 2 LAN drivers, different modem drivers, etc. listed.

  In the installation instructions document, you must install only the drivers and utilities that are listening. This guide line is important and if you install the Toshiba drivers manually, you should follow this guide line.

  You will also find the document in the section of the driver

• Qosmio G30-175: DVD player - RAM, it's a CD player

  Hello people, I once again.

  My 2 week old Qosmio G30 - 175 has a DVD-RAM drive that now appears in my computer as a CD player. As a result (I think) it will not automatically DVD playback. I can play manually through the media library or WMP, but no option does appear in the properties of the drive for auto, DVD playback.

  Can someone tell me why this happened? It is used to appear as a DVD - RAM drive. The only thing I did was to install Nero Premium. Who would have something to do with it?

  Thank you very much.

  Hello

  Some people here in the forum have had problems with burning and DVD recognition because the different burning applications were installed on the operating system.
  Try to remove the other burning software and use only Nero.

• Qosmio G30-175: why the properties system tell Media Center 2002 and not 2005?

  Hello

  I have a qosmio g30-175, it says on the sticker of the authentication windows on my laptop computer Media center 2005, the problem is that when I check the system properties in Control Panel, it says units media center 2002 SP2. I find it confusing, Toshiba gave me the wrong version, or is it quite normal.

  I installed windows by using the recovery disk of the product came with my computer.

  Thank you.

  Don't worry man. Everything is ok! You have a MCE 2005 version

  You have simply checked versions MCE in the wrong way!
  If you want to check the MCE versions open media center, click on "settings", then click "about media center". The version of MCE will appear.

  What you're watching now is the version of XP/OS. The XP is the Foundation for MCE. ;)

• Qosmio G30 - BIOS need to be updated for Windows 7

  Hey,.

  I am trying to install win7 (not beta) on Qosmio G30 (PQG32E with HD-DVD).
  I begin the installation, and copying the files on the hard drive. Then the computer restarts for installation.
  But every time you start ends in a blue screen with the error: stop 0x0000007E. The text of the blue screen is not little say on an update of the BIOS. But there is no latest BIOS available on the Toshiba site. BIOS 3.90 is installed. There is no other is available.

  XP and Vista runs without problem.

  BIOS with a standard configuration.

  Concerning
  File

  Hello

  I don't see any question in your message, but you probably want to know if Toshiba will offer BIOS updates. I am sure that nobody here can give you a definitive answer but, in my opinion, Qosmio G30 will be not supported with Win7.

  The first series of Qosmio G30 is delivered with WXP MCE and later with Vista. Thus, this model of laptop is quite old. I watched how Toshiba treated with old laptops when Vista was on the market again and not over a year of two laptops have been supported. So I think with Win7 will be the same story. All laptops, not more than one year one or one and a half not will be not supported for Win7.
  I think in the future that Toshiba does not update the BIOS designed for Win7.

  Of course, I wish wrong me about this, but the future will show whether or not it is just my opinion.

  In any case, good luck.

• Qosmio G30 - 10F - need mainboard partnumber

  Hello

  I need to reference my motherboard, because it is defective and I want to replace the motherboard.
  and my dealer wants the right partnumber to find the right spare parts.

  But I can't find the reference to the Board of Directors, one and only one i found is:
  + A5A001964 / 030 A0 / C074AGOT +.
  + Model: Qosmio G30-10 +.
  + PQG32E-03903NGR +.
  + S/N: 47816895 +.

  And my dealer said, the partnumber resembles this example: P000462640

  Thank you

  As far as I know Toshiba service partner has this info. They have access to Toshiba of database and that you can check this. As much as I know that Toshiba has offered two platforms for the Qosmio G30, so it is very important for you to get the motherboard for PQG32E.

  I mean if you have this number, you can order only and you don't need some special shopping.
  Try to contact the nearest Toshiba service provider and ask for help.
  It's really not easy to help you with this.

  And Yes. Part number is something like K000xxxx.

• Qosmio G30 - 175 GB nVidia series 7600 Code 10/43

  I recently updated my G30-175 of windows update (Windows XP), then I started getting a "Code 10" on my chipset nVidia Go 7600 series. Since this happened I tried to roll back the graphics driver (when that happens first,) which when it restarts it worked very well, and I then shut down the system. When I started again the next day, I had the same problem of Code 10.

  I tried to use a restore of the system, but to no avail. I decided to uninstall the graphics drivers and install the Toshiba drivers, those for winXP and everything I got was Blue Screen of Death, once to start in safe mode, I uninstalled the driver, and recommended installed nVidia Driver (beta version 179,48 for winXP) I've also tried a few more nVidia drivers that I found for the Go 7600 and the result remained the same "Code 10" cannot start device.

  I read a lot of blog to this topic for series 7, 8 and 9, who generally say that there are "Problems" with the pilots, and to use the windows update the nVidia drivers. I tried this and still no change.

  Not seen floppy disks of origin for the laptop, I decided to take it on myself and upgrade of the 2x512mb RAM sticks to 2x2gb DDR3 laptop RAM, the system started very well and I decided to install windows 7, from what I read, it was the best option (for Office 7 cards of the series) (, after not found 'NO' blog on the Go 7 series) after installing win7 chipset began to work properly, it's up to windows update, and once again, the same "Code 43 windows reports errors and the unit stopped.

  I tried the Windows7 Drivers to support Toshiba, once again BSOD, I tried to reinstall the windows update the nVidia drivers, and the drivers from the nVidia site (179.48 version beta for Windows Vista/7), which none are working.

  I tried to solve this problem now for 10 days and not a glimmer of hope. It is possible that the chipset is not, however, I think it's a malfunction of the software, it is also a coincidence that when I update windows, I get a chipset failure.

  Any help is good help.

  Thanks for listening

  Hello

  What is the BSOD STOP Code?

  We will be able to identify the problem by using the STOP code.

  0x000000?

• Qosmio G30-175: how to install Qosimo Player after changing RAID

  I noticed on my G30-175 x 2 80 GB hard drive, I had the opportunity to do RAID1 but don't want that.
  I want RAID0, I understand that I have to rebuild, said drivers on the disk that is ready to go, but I noticed that the player seems to use a small partition on the hard disk 1.
  After I changed the raid settings in the Bios I assume that that info will be lost so now, during reconstruction, which will be reinstalled from the cd rocevery aswell?

  Help me please

  Hello

  You re right. Changing the settings in the BIOS RAID leads to loss of data on the hard drives.
  = RAID0 mirroring. This means that all data are saved on the first HARD disk will also be stored on the HARD drive second.

  So I guess that the Qosmio Player will be installed on the first HARD drive on a small partition.
  Do you have the Qosmio Player recovery CD?
  If Yes, then you should be able to reinstall this application.

  Note: To my knowledge the recovery CD contains only the operating system, drivers and utilities but not a Qosmio Player. So you must install it in addition form the Qosmio CD player!

• Question about the memory of the speeds on Qosmio G30-175

  Hi all

  I have a G30 - 175 and it came with 1gig of memory. and the other day I went to pc world and bought a 2 giga upgrade. The seller asked me what memory speed would I like for my laptop, knowing that the ddr2 at 533 mhz memory, so I asked for it.

  When I came home and replaced the memory, I noticed that the memory supplied with the laptop was actually s pc2-4200 ddr2 533 mhz. the memory that I got from pc world was of the pc2-4300 ddr2 at 533 mhz.

  It would be allowed to go ahead and install this memory, or should I expect pc2-4200?

  Thanks in advance

  Jay

  Hello

  I would recommend using DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM as here on this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24718&ft=m&St=3

  Train to my knowledge it s advisable to not to mix modules

• Failure motherboard on Qosmio G30-175

  My G30-175 simply refused to power one morning without warning and in the middle of important work. And after about 3 weeks without a backup.

  At first, I thought it was a power supply problem and taken to a store and tried other adapters sector and batteries.
  I called the warranty and the machine was taken over in a few days.

  Repairers diagnosed the problem of the main card and said that I should wait for it to come.
  It was a month ago and they don't see a Board to come for another month. They said that they also have other users G30 waiting.
  Apart from this nightmare situation, I have the info on my hard drive.

  A friendly technology sent my drive and I thought he bung in an enclosed and read it.
  Now I find a SATA 2.5 enclosure is hard to get! I have finally a hunted and am awaiting delivery.

  Then if it works I have to configure the master drive or slave? If so, how?

  How do I know which drive has been sent and I think that it was configured as a raid set up will be giving me problems?

  Tech from Toshiba materials are accessible and useful, but there is no number for the customer service

  Anyone who suffers from long repair time?
  Is this normal?

  Hello

  Reading some earlier assignments, he has concluded that the replacement of the motherboard cannot be done in a few days. As far as I know service must send defective Board back and they will get a new. It also depends on the country where the repair must be made. You know that sending package takes different time for different countries.

  There's nothing unusual in my view 3 or 4 weeks.

• Qosmio G30-140 - cannot adjust the brightness of the screen on Windows 7

  Hello

  I installed Windows 7 on my Qosmio G30-140, but I can't adjust the brightness settings.
  Instead of allowing me to place the cursor on any position, I want that I'm stuck with only 3 steps which elect to.
  The last of them is way to bright and my eyes keep tear having to deal with this crazy amount of white, especially on white background.
  The other two are very, very dark.
  What is going on? I installed the right Nvidia drivers.
  Also, I can't adjust the brightness using the FN keys on my keyboard. They simply produce no result at all.

  Need help appreciated, I can't work like this.

  Thank you!

  Hello

  The brightness of the display can be controlled by the FN + F7 and Fn + F6.
  I think you should install the VAP and buttons of the Support of Flash memory card utility in order to get this to work!

  Check the added value Package and Support Flash Card which are released for Satellite L500 utility or new models of laptops.
  In my case it worked!

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• Qosmio G30 - 175 virus and the need to recover

  Unfortunately, my husband has downloaded a virus Smart Engine and now my laptop does not work.

  Sometimes I can get on the internet and Word for example, but sometimes takes several attempts.
  Slowly, has worsened over the last days even though I thought I had removed the virus.

  Cannot back up data because IE components cannot be read etc.
  I wonder if I use the recovery disk will I lose all my data, photographs and documents?

  Any help would be appreciated

  > I wonder if I use the recovery disk will I lose all my data, photographs and documents?
  Unfortunately, Yes. The recovery would be to format the whole HARD drive and would erase the partitions too.
  I recommend starting the Live CD WinPE and BartPE. (use google)

  These are Boot CD. This will start Notepad with Windows operating system environment that allows you to access the data on the HARD drive.
  Then, you can back up important data, and can then use the recovery disk to reinstall new OS.