Qosmio G30: Cannot chang area settings DVD
I have a G30 and seem to have reset the dvd region using Qosmio rather than Windows MC.
When I try to reset the dvd Windows MC of the region (back to region 2) says that there is a change remaining but then won't let me edit, informing me that I have the media region wrong in the drive (I have not) or well I don't have administrator rights (me).
Where have you checked the disc region settings?
Have you checked in the properties of drive or somewhere else?
In my opinion you have already used tries to change region and change is no longer possible.
Tags: Toshiba
Similar Questions
-
Qosmio G30: Cannot burn DVD after installing Vista
Hello
I'll upgrade to Vista, but the problem is that there is no PILOT of RAM DVD!
What I ask is the following: -.1 at - it Web site that display all the drivers {for Toshiba}
2-if I was not installed this program, I could record DVDs?
3. If there is a driver for it, I am glade he get you {vista}
Yes I forgot to mention 1 thing, my machine is QOSMIO G30!
Best regards
knk2006
1. Yes, you can view all the drivers for your laptop model and the operating system on this page:
http://EU.computers.Toshiba-Europe.com (Support & downloads)
2. I think there, like WinXP, already supported this, a base built into a program for recording discs, but I do not like he doesn't have many options. I suggest you try other programs like nero 3rd party
3. normally, this DVD Ram driver should be included in Vista. Maybe you could try to use another program, as I mentioned above.
-
Cannot change the settings on the computer. No access to the administrator account
Original title: I can't access permissions to change settings or programs.
I can not access permissions to change any settings or programs and do not have access to an administrator account, I tried what allows one but you must have admin permission to do so. Please point me in the right direction, it seems that Ive tried everything. ID realyy don't want to spend money on software
Hi Christophe,
-With which user account you have connected? It is a standard user account?
-What happens when you try to change the settings? You receive an error? In the affirmative, please let us know the exact error message.
Since you are not able to create an administrator account, I suggest you to enable the built-in Administrator account.
1. you must start the computer by using the Windows 7 installation media.
Follow the steps in http://windows.microsoft.com/en-us/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7 to enter the recovery options in Windows 7.
Note: See the manual of the computer to change the Boot order in the BIOS and set the CD/DVD as first boot device.
2. Once you start the computer by using the Windows 7 installation disc, follow the instructions on the screen then go food Advanced Options and select command prompt.
In the command prompt, type net user administrator / Active: Yes
After the command finishes, restart the computer and then log on to the administrator account by default, change the account type of the old user account and make as administrator and check if you are able to change the settings.
Follow the steps in the http://windows.microsoft.com/en-in/windows7/change-a-users-account-type to change the account type of the user account.
Once you have set the administrator type account with your user account, disable the default user account by following these steps.
1. login to your user account.
2. open the command prompt, type cmd. exe in the run search and right click on cmd.exe and select Run as Administrator.
3. type net user administrator / active: No.
This will disable the built-in Administrator account.
Hope this information is useful.
-
Qosmio G30 - SSD drives are not recognized
I have a Toshiba Qosmio G30-140 with two hard drives.
One with Windows 7 and the other with XP.
The system allows to start the 1st or the 2nd.To speed up the system got two Samsung 830 Series SSD drives
model: MZ - 7PC256.
The BIOS (BIOS ACPI version = 3.90), do not have the option and I have AHCI, I adopted
1RAID-0.
In this option, the discs to work independently.
They work well, but the "Samsung SSD magician" application, does not recognize
No SSD.I'm afraid that you do not work in the best conditions and which could have
best performance.
Thank you for helping understand me what isn't here and can improve the performance of SSDS magician.
Thank youHello
I don t use this software Samsung SSD magician, but some people in the net reported that there is a new version of this utility in addition many people have problems using this software and this issue seems to depend on laptop but possible on the SSD drive.
As much as I know there are other tools like Driver Magician or SSD Tweaker that perform similar functions as magician Samsung SSD
-
You cannot change the settings of my Toshiba Power Management
Cannot change settings in my power toshiba management section... can someone help me?
Hi Matt
I want to help you, but first of all, it would be very interesting to know the name of your unit.
However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.Good bye
-
Qosmio G30 - can't read HD-DVD
Had this laptop for a while, but decided to try and find a HD DVD for the first time. Computer does not recognize the HDDVD.
Play normal DVD OK but will not play the HDDVD?
Anyone out there can help. I have very limited technical knowledge simple instructions would be appreciated.
Hello
Your Qosmio G30 is equipped with an HD-DVD player?
First check because it sounds like this your drive is just a DVD player.For more information, see the user's manual.
Welcome them
-
OfficeJet 8600: Cannot change network settings
I have the same problem, as described in this previous thread where you can't change any settings when connecting to the printer via EWS. Due to the installation, I use a box with Windows Server R2 2012.
I can't change the IP address I get the message 'invalid input '. I tried using the compatibility settings, but applying that makes blank pages. I noticed that I get the same message when I try to change the hostname also like the OP did in the above link.
Are there updates for this problem?
I could change it using Google Chrome on Windows 10... I guess he doesn't like IE on Windows Server?
-
You cannot change the settings of UAC with the guest account
adadadsadadsada
You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.
-
Cannot change the settings after the take snapshot in VM
Hello forum, I need to increase a disc size and the number of virtual processors on couple of virtual machines, the last week I have instant tool of these virtual machines. Today, when I try to change the settings, I see that the options are grayed out. Why is it so? This is a limitation of vmware. Do I have to delete the snapshots before making changes? Which will remove the ability to roll back changes if necessary. I'm under Windows 2008 R2 virtual machines.
Virtual disks can only increase if they have no active snapshots. The snapshot files contains modified data blocks that correspond to their parent records, and this mapping I lost if you have increased a virtual disk with snapshots.
André
-
Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled
Hello
I activated a supervisor for 1.50 acpi BIOS password.Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.THX in advance
elitecamperHave you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversBefore setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.
-
Family - sorry, you cannot change your settings now. Please try again later.
I'm trying to add a site in the list for my children. It fails and I get the error: "sorry, you can not change your settings now. Please try again later. "I tried for two weeks and wait until"later"is a euphemism for '' never. ''
Has anyone else seen elsewhere? What should I try next?Hello
Our support specialist verified the information you provided. Please follow the steps below to solve the problem:
- Connect to Family Safety Web site
- Select the child who is not associated with a user account.
- In the blue bar above, click Remove family member and then confirm by clicking Remove.
Let us know the results later.
Thank you.
-
Hello
I had a quick glance around my system because I think it has been compromised. Today, I noticed something I never saw before a "Remote Desktop connection" icon in my documents - time created yesterday - at about 20:00 - 08/04 when I was not on the machine and certainly don't remember updated anything.I went into control panel / system/distance and unchecked boxes related to assistance remotely etc. Is there anyway that anyone can access my machine remotely? or how would I know if they have? The sudden appearance of this icon and the calendar has caused me some alarm. I deleted it + at the present time, it is in the trash. I did it because it gives an error when I try to save changes to settings that do not allow access.Someone could give me some advice please on what this could be and how I can assure any remote access to my pc. (Windows XP / wired ethernet via Bt Home Hub connection) Thank you.HelloIf you think that your computer is infected with malware, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.Brian -
Solved: Cannot change notification settings music app playing / open in Lollipop
I have not found anyway to change notification settings (priority/silent/sound) in Xperia Z2 while listening to music or if the music app is running listening to music. I tried different applications (Walkman, Spotify, Google Music) with the music and the problem is present with all music applications. This problem came with the Android 5.0 update (Lollipop). If I want to change my mind, I have to stop the music and close the music application. KitKat, I could just press the power button longer and get notification settings, but no more with Android 5.0.
There is a fix for this in 5.1 Android, but I have not found information there will be updates 5.1.
If anyone has found a way to change settings while the music running application, or that I need to hope and wait for Android 5.1 upgrade?
See you soon,.
Janne
Edit 2015-04-22: Add 'Resolved' prefix to the subject.
jsavikko wrote:
If anyone has found a way to change settings while the music running application, or that I need to hope and wait for Android 5.1 upgrade?
Answering my own question:
Pause music, turn the widescreen (or one if it was turned off and then first on the road once again) power button for a while, and then on again. Now you should be able to control sound notification settings when you press the volume key. If the playback volume volume touch control instead of notifications, turns the screen turned off again and wait a little longer before turning back on.
With this method you don't need to close the music app notifications of control.
-
Cannot change preview settings
MacBook Pro (17 inch, late 2011)
OS X 10.10
First CC 2015
Trying to change my settings to preview a sequence and can not. Delete all previews thru first and manually through osx. Any ideas?
Thks
Hernan
Create a new sequence and copy and paste in the new sequence.
-
Qosmio G30-117: WinDVD Creator 2 - DVD creation does not work on DVD player
Hi all, need help.
When I create a DVD on WDVD2 all the menus and the toggles are working on a PC but not on any DVD player. They only work on a PC when I use the mouse and click. On a DVD Player do not have arrow keys and / enter the game.Am I missing something?
Hello
It is not easy to say why this is happening. I recommend you to use another application to create DVD and check if the problem persists.
I created a few DVDs with Qosmio G20 and same application without any problem.
Maybe you are looking for
-
How to stop firefox to shutoff valve of the desktop computer
have not been able to stop the desktop computer, while in firefox there is no button on the keyboard
-
I have Mac OSX 10.7.5 - suddenly - one day when I opened Mozilla - the bookmarks toolbar is only half showing. I have to use a white "slider bar" to the right in order to display all the bookmarks already always showing without having to scroll. That
-
Connection of a Bravia HX-800 to a home theater BDV - #570 system. With the help of HDMI connections. When you use the Blu - Ray player - all right. When he was watching television (cable) can't switch all sounds home theater (sound works well on tel
-
W500 and Windows XP Professional x 64-emission sound
I managed to get all the installed drivers I need installed. As Lenovo does not officially support XP x 64, it has been rather difficult. I had a driver for the Conexant HD SmartAudio 221 card installed and Windows claims that it works correctly, but
-
move Windows 8 Enterprise n to Windows 8 Pro
I currently have Windows 8 Enterprise N RTM installed on my PC at home (for work purposes). Now, I want to buy Windows 8 Pro for my personal use. Is it possible to go from Windows 8 Enterprise N to Windows 8 Pro without losing my settings/application