Qosmio G30: Cannot burn DVD after installing Vista

Similar Questions

• Qosmio F10-124: some problems after installing Vista

  Hello world

  have upgraded to vista premium
  on laptop with update system and card nvidia geforce 6600 graphics
  rating for graphs 1 shows no transparency at all.

  Can not find driver of common modules like the others
  and also its being played at half speed
  Windows says all devices are working correctly (do not think)

  can you help me
  Alan

  Hello

  As far as I know, Toshiba does not support and does not all drivers vista for Qosmio G, G, F10, F20.
  The Vista drivers are available for G Qosmio F30 laptop
  Therefore, you will not be able to find common modules and others on the download site Tosh.

  The needs of Vista and wastes many resources of the laptop! File, the picture transparency and the Aero feature needs min on 256 MB graphic card, fast CPU and min 1024 MB of memory.
  Here are the requirements material min!

  But you should also check if the transparency of Vista (Eye Candy, magnifying glass effect) has been activated!
  To enable or disable this effect do this:

  1. right click on an empty area of the desktop
  2. Select Customize from the context menu
  3. click on window color and appearance Option
  4. check if you want to enable transparency or not.

• Satellite M60 - BK3: cannot get sound after installing Vista

  Hello

  I installed Windows Vista Ultimate (32 bit) on my Toshiba Satellite M60 - BK3, but I can't not all sounds is the correct video settings. I searched on the internet and it seems that this family of satellites is not supported to be upgraded to Windows Vista: S

  Does anyone have an idea of how get these drivers to make my laptop works fine with Vista?

  Thank you.

  Rodrigo

  Hello

  This Satellite M60 - BK3 model does not work for me. Where did you buy it?
  Try to install a hardware diagnostic tool to know what sound chip and the graphics card supports this laptop.

  You can download the drivers from the part manufacturer's website.

• After installing Vista, CD/DVD drive cannot be seen or read.

  After installing Vista, CD/DVD drive cannot be seen or read.

  Hi heartmanmd,

  You get the error message?

   

  Run the fixit available in the article below and check if that makes a difference

  
  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall MS OneNote2003 after installing Vista?

  Hello everyone,

  I was a bit confused of the 'ExpressUpgrade' action, because I first thought I would get
  a DVD-Windows Vista upgrade, but as I can see in ModusLink he is named "Windows Vista Home Premium 32 bit DVD"... OK, it's done now, but that's why I have other questions:

  There was additional software and utilities already installed (I have a Satellite P100 - 463 WinXP).
  I know that there is this "step by step Toshiba DVD" who has first updates the BIOS, install Vista and then the drivers needed and utility (as "Toshiba Assist" and all the others, I guess). As it is written in the guide step by step, all programs etc. will be deleted, as formatting of the hardddisk, ok.

  But with the laptop, there wasn't "MS Office OneNote 2003" already installed and this program, I have not found on one of the DVD / CD. On the CD is 'MS Works 8.5' and on 'Tools-CD"that I was burning of 'C:\toolscd' there are things like"InterVideo Win DVD Creator"(the player) and"recorder of Sonic.

  On the "Recovery-DVD" is just the Image of Windows XP preinstalled + software etc and I think of course, there is also the OneNote2003, but like I said I can't find the setup.exe from OneNote2003 anywhere...

  Or could it be that OneNote2003 will also be installed with the installation of Vista? What is a "core" Vista, don't not patched by Toshiba? As I was reading in the Vista_Express_Upgrade_instruction_multilanguage.pd f (the manual "upgrade progressive", first BIOS is up to date, then installed Vista and here again I have to use the toshiba DVD to install the software and drivers...) Is it only "utiltities' as"Toshiba Assist"or as software?

  Last question: update after the BIOS that is needed for Vista, is still possible to install the "old" Windows XP + stuff pre-installed recovery-DVD or this BBIOD goof only for Vista update and I cannot restore the original recovery image?

  And anyway, can I install new stuff like Works 8.5 etc. on Vista or will I have problems with it?

  Thanks for the replies.
  Greetings, launchee

  Hi kai

  I know that the Vista upgrade is a bit confusing
  So I'll try to clarify some things:

  1.) Toshiba Recovery XP CD contains all Toshiba drivers, utilities and tools, as well as additional programs like OneNote, Win DVD, etc.
  It is not possible to install this software separately without using the recovery CD because these programs are part of the image.

  2.) as far as I know the received "Windows Vista Home Premium 32 bit DVD of moduslink company is not a restore CD but the real Windows Vista installation CD. That's why you need to install all the tools of Toshiba and the drivers after installing Vista. This CD does not include additional software such as OneNote or WinDVD

  So finally, you will be able to install Works 8.5 on Vista because you have one working on CD separately but it s not possible to install OneNote from recovery CD

  But you can try another way. You could create a second partition and you could install the Vista to the second partition.
  Laptop you would use the two operating system; XP and Vista. The Vista also provides a clean boot manager.
  Therefore, it is very easy to switch between the two OS's.

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 0 x 80041003 after installing Vista?

  I get the following error message after installing Vista on my laptop. It causes the computer freezes. It will also freeze after restarting. I have not installed anything, or deleted all the programs. After researching on the forums, I discovered that it is a Vista/Microsoft error that happens regardless of the manufacturer of the computer or installed equipment.

  Microsoft has found the answer to this yet?

  Log name: Application
  Source: Microsoft-Windows-WMI
  Date: 2010-01-07 22:18:41
  Event ID: 10
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: SatellitePro-PC
  Description:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      10
      0
      2
      0
      0
      0 x 80000000000000
     
      1434
     
     
      Application
      SatellitePro-PC
     
   
   
      ./root/CIMV2
      SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
      0 x 80041003
   
  

  Hello melm12,

  This problem occurs if the WMI filter is accessible without the necessary permissions. To resolve this problem, run a script to stop the event ID 10 messages. Here's an article in the knowledge base with details on how to do it: http://support.microsoft.com/kb/950375. Otherwise, it might be a hardware failure. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• VISTA HOME PREMIUM 643 ERROR MESSAGE AND COMPUTER SLOW AFTER INSTALLING VISTA

  I WANT TO GET MY PC RUN FASTER AND AFTER INSTALLING VISTA, IT SEEMS MORE SLOW TO EVERYTHING I TRY TO RUN I HAVE AN EMACHINES T5052 AND IT SAYS THAT I ONLY HAVE 1 GB MEMORY (RAM) BEFORE I WAS USING WINDOWS XP PLEASE I NEED HELP, THUS FREEING UP SPACE AND DO IT RUN BETTER

  OD WINDOW ADVANCED CARE?

  You must have only ONE AV installed; otherwise, you get crashes, freezing, program conflicts, etc.

  Defender is an Anti-Spyware, not an AV.

  The FREE Malwarebytes will work OK with them.

  And do the work that I advised to do. Mick Murphy - Microsoft partner

• Device CD/DVD Toshiba HD DVD (not Bluray) does not work after installing Vista Service Pact 2

  Computer computer = laptop Acer Aspire AS9810-6829
  S/N = LXAF 15 707 0065 023 00 60V0
  Operating system = Windows Vista Ultimate... Service Pack 2
  Problem = DVD player does not work!
  DVD model = TOSHIBA DVGW/HD TS-L802A ATA Device

  Measures taken by the owner to correct the problem.
  1. check the Device Manager and records the following information:

  Windows cannot start this hardware device because its
  information of configuration (in the registry) is incomplete or damaged.
  (Code 19)

  Click on 'Search for solutions' to send data about this device to
  Microsoft and see if there is a solution available.

  2. Replace hard drive with a backup hard drive for 8 monthe ago.
  The DVD worked correctly with the old disk installed hard & Vista Service Pact 1.

  3. has concluded that the information in the registry for the DVD has been damaged.

  4. do you have a complete 'Clean Install' of the operating system and all applications.

  5. the problem seems to be resolved.  The DVD worked.

  6 Windows began its update procedure.  Several updates have been installed as well as
  Service Pack 1.  After each installation of the DVD worked fine.

  03:07 days of windows update, Windows Service Pack 2 has been installed.

  8. immediately after installing Windows Service Pact 2 DVD has stopped working
  Device Manager displays the same message that appears at the point 1 above.

  9. Please help!

  Ken Lewis
  E-mail address is removed from the privacy *.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Qosmio G30: Cannot install XP because of the RAID

  Hello

  I have a problem installing Windows XP PRO on G30.
  I have downloaded the driver RAID for Windows XP, make a copy of records in 'root' of the FDD.
  I have connected USB FDD and beginning of the installation of Windows
  You press F6 and install drivers TOSHIBA RAID
  Continue through the 1st partition of formatting.

  After installing Windows considered my HARD disk after formatting, I got this screen:
  ______________________________
  Insert the diskette labeled:
  RAID TOSHIBA driver
  in drive A:

  Press enter when ready
  ______________________________

  By pressing enter, nothing happens, just stay screen.
  Pressing F3 closed unexpectedly instalation!

  And again and again...

  Hello

  I think I have a solution

  I presume that you have formatted the HARD drive after installing the RAID driver. That's wrong! Don t it!
  If you format the RAID driver HARD drive is removed and the installation program cannot recognize the HARD drive!
  Once you have included the RAID driver from the floppy disk, you need to follow the installation of the OS.

  Please check this!

• Qosmio G10-133: cannot burn DVDs more

  Since the first day I was never able to record on a DVD. I've tried many discs. Different software. I get that day, but when the deer of burning starts, he discusses the creation of a newspaper report. Any ideas.

  Do I need a new rom?

  Hello

  I guess it was possible to burn DVDs to the start time.
  Well, it's not easy to say why it doesn t burn DVD media.
  Sometimes, perhaps because the wrong lens calibration.
  But in this case, you should replace the disk.

  Also a non compatible DVD media could be responsible for these issues.
  Please see the manual for the DVD compatible and tested.

  You can also try to remove the drive from Device Manager. After restarting again the operating system should recognize the drive again.
  Then check if it of possible to burn DVDs