Qosmio G50 - 12 q - AC IN LED flashes orange

Similar Questions

• Satellite Pro M10 cannot start properly - AC LED flashing orange

  Hello

  I have a weird problem that I can't solve.

  (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
  (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
  _________
  When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

  I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

  I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

  My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

  Do anyone know how to solve the poblem? Thanks in advance.

  Hello

  These problems are very rare and shouldn't t happen if hardware or software is ok.
  Power LED blinking orange means there could be a hardware malfunction.
  It is a code flashing microphone and a technician can be read.
  This code must be translated into the hexadecimal digit.

  But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

• Qosmio F20 won't start - power light flashes orange

  My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

  I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

  I am really puzzled.

  If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
  In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

  They have manuals containing instructions and the exact description of the code how do I solve this problem.
  Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.

• Acer V5 - 571P says "plugged in, not charging" and battery LED flashes orange from time to time.

  Laptop didn't work when it's plugged in and the battery says "plugged in, not charging." Battery LED also flashes a few times from time to time, so I don't know if it's a circuit board problem or the battery itself.

  I tried updated driver battery without success.

  You can try to unplug the power and remove the battery. Press and hold power for 30 seconds, Plug and see if it is supported.

  Generate a report on the battery

  http://www.howtogeek.com/217010/how-to-generate-a-battery-health-report-on-Windows-8-or-Windows-10/

  Your numbers will be different from the one below, but the left is good, the right is bad.

  

• Tecra 8100 won't turn on no - DC led flashes orange

  Hello. Tonight I turned off my Tecra after working for hours without any problem. Now I try to turn it on and the DC led blinks with a light orange. the model is:

  Short-Short-Short-short-long-short-short-long

  and then the rehearsals...

  With battery, it's the same thing. It's strange because the battery seems to be getting charged...

  Thanks for your help.

  Hi Toka

  Only thing you can try is to remove the battery, then try again. If this doesn't help you should contact the partner in your country. I put t know what means this hexadecimal code, but there is a problem of electronic power supply.

• Flashing orange LED on Qosmio F20

  To cut a long story short, my Qosmio is no longer in effect.

  It has 5 LED lights on the front. I need to know what message they give some in order to identify the problem.

  Five to the left led flashes orange (irregular) and refuse it to power Qosmio. The flashing light does not occur when the Qosmio is not connected to the electric network.

  Basically, I need to know what know me.

  Thank you.

  Hello

  Of course, there is a power electronic and portable problem sends the hexadecimal code. To know what this code means that you know exactly how to read this code.

  Unfortunately I didn't find any public documents about it. In any case, I believe that without service there is not much to do. Or maybe you try fix it yourself?

• Satellite L500 is OFF and the Green LED flashes if hooked on sector

  Help!

  I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else

  Hello

  What indicator do you mean exactly?

  DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

  The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

  Also if there is a failure of memory Power LED repeatedly flashes
  0.5 sec and off 0.5 sec
  If there is a problem with the slot A the LED flashes two times orange then green once
  If there is an error in the B slot, the LED flashes orange green once then twice
  If there is error in the slot A and B the LED flashes two times in orange and green.

  But if the power light flashes green only, I guess there is a motherboard problem.

• Tecra 9100 don't start - power suplly LED flashes

  Hi all.

  I have a problem with a laptop Tecra 9100. When I push the button start the suplly power LED flashes orange for eight times to make a quick stop in flash 2 and flash 8. Can someone explain to me this error code is this?

  Thank you for all your answers

  Hello

  If electronic power supply detects that some portable problem send a blink code. This code allows you to identify the problem. I can't tell you much these codes, but what I know for sure, is that you need professional help.

  Please contact the service allowed in your country and explain the problem that you have.

• Satellite A10: Battery-LED flashes with AC

  Not too long ago I bought a new battery for my laptop. About a year and a half he worked well. But one day I just couldn't start Notepad without AC. I thought, just dead battery. If I set up the adapter sector, but the next time, the laptop didn't start either. With AC, no problem.
  So I charged the battery, and when Windows says, full battery, and the Green LED, I unplugged the AC. But then the computer laptop completely stopped, as if there is no battery.

  Now, it's this way: it is not serious what know Windows. The laptop does not start without AC. After a disconnect from the AC, the battery led flashes orange fastly. When windows is running, it only slowly blinks orange.

  Where is the problem? Anyone know a solution?

  Hello

  In my opinion, there are two possibilities.
  Either the battery is dead and needs to be replaced or to power portable electronic malfunctions.

  The first possibility is not serious because the battery change should help solve this problem, but if the power of electronic books is not working properly, the entire motherboard must be replaced.

  I think that it s advisable to contact the ASP in your country, because the guy has found the fault very quickly and could provide the best solution.

  Good luck buddy

• Satellite L455 - plug-and - battery LEDs power LED and it flashes orange

  I have a Satellite L455, which worked perfectly for more than six months now, but two weeks ago he began to behave strangely.

  I turned off the machine normally in the evening I was going to sleep. In the morning when I turned on it it turned on, HARD drive and on power LED blinked blue for a few seconds then they are gone. Machine does not start. I tried to turn it on again and it does the same thing. Then I saw the "power plug on" and "battery on" LED flashes orange at the same time. I unplugged the power adapter. Both lights were continuous blinking but machine will not feed. I removed the battery for a piece of 5 minutes, then reinserted it and the machine has worked all day.

  I went he deleted off the power plug and the morning again it wouldn't start until the when I removed the battery for a few minutes then it works again. The battery recharges very well that when I remove and reinsert it even without connecting the power cable still lights up and works perfectly.

  Then, I removed the battery and the power supply Plug and you press the power button for 30 seconds to unload the machine and then return power and battery and it worked until I turned off again and shutting off the power and then it didn't once again.

  If I stop just of machine and do not turn off the power cord, then I can turn it back on to and work with the machine without hassle even for three days without interruption.

  What could be wrong? Any help will be really appreciated.

  Concerning
  Yusuf

  Hi chidzungo,

  It must certainly be a hardware malfunction but he s strange why it pops up every day after you have closed the laptop. Do you use batteries and AC/DC to original Toshiba adapter? Have you connected external devices to your laptop? If so delete them before you turn on your laptop.

  What version of BIOS is installed at the moment? You should look on the Web from Toshiba website for an update. Update of the BIOS might also help and it s worth a try.

  Before you start reading the BIOS BIOS update instructions update [HERE: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60]

  Satellite L455 seems to be an American model, so the BIOS update can be downloaded from the Toshiba U.S. page but first check the exact part number:
  http://www.CSD.Toshiba.com/

• Power supply question - amber LED flashing - Dimension E520

  So, I'm working on the dust removal and re - install windows on a machine. I've done dusting, but now I have problems with a LED flashes orange. The system will not top all - fuel without fans or beeps.

  After looking through some posts for ideas, I think it is a bad power supply or a problem with the heat sink.

  I think power because this seems to be a common problem. How can I test the existing? Is there a way to fire unless it is connected to the motherboard?

  The reason why I am wary of the heatsink is that I removed it when I was doing the dusting. I had the intention of fire tonight and get a new thermal paste in the coming days. Since then, I have read that this could be a recipe for frying the total CPU and I wonder if the machine is not pulled up like a check for free preservation any.

  It detects if I removed the heatsink? If it's happening, it will automatically detect when the new thermal paste is in there? Or is there a reset procedure any?

  Any help would be great. Thank you!

  As a side note, the design of this box is poor. I can't find some way to dust effectively the heatsink without removing it from the central unit. Supply openings do not match, so you cannot blow a good flow of air through the box.

  chelseasounder

  A flashing orange switch LED means that the computer is under voltage, but a power problem internal may exist.

  This may indicate a bad diet

  Are the Diagnostic LEDs on the front panel lite?

  The diagnosis Codes are HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Have you checked that all the cables to the motherboard and the disks are properly connected, by disconnecting and then reconnecting them?

  Bev.

• Qosmio G50 - HARD drive blinks every second

  Well, if she's here,

  I have a Qosmio G50. I installed WindowXP Pro 64-bit.

  I noticed the hard drive light flashes every second. I spent some time searching the net for a soultion. This led me to download a utility called "process explorer" from microsoft.

  This utility show me that the active process is services.exe. The properties of this service suggest that it handles "eventlog" and 'plugplay '.

  I realize that I can't go to the event log, nor what I want.

  Can anyone help?

  Thanks in advance.

  Hello

  The HDD led always flashes if it read all the data or written to the HARD disk.
  The service.exe (Service Control Manager) belongs to the Windows operating system and it s of Microsoft which is necessary and my knowledge background process, it cannot be disabled.

  Good bye

• Disassembly of the Qosmio G50

  A few months ago I spilled a glass of wine the keyboard of my G50. End of G50, flashing orange power light and would not turn. Insurance replaced with a nice model of Satellite AC and no data has been lost.

  I would now like to see if the G50 can be repaired/cleaned, thin hope I know. I removed all visible screws from the base and the back of the computer, but does not know how to go further. Have used a moderate strength but do not want to destroy the beast while pulling outward.

  Can anyone advise my next steps?

  Thank you

  David McKeand

  Disassembly procedure is not complicated, but this must be done step by step following steps.
  What you do is first remove the battery, RAM and HARD drive. After doing this, you must remove keyboard. On this step, you must be very gently. As a first step, you need to remove the keyboard on top of the keyboard stand, then remove the screws that attach the keyboard.

  After removing the keyboard check if there's a few screws on the side of the optical drive. If Yes, remove it and shoot the STRANGE (I presume that the screw is down already deleted).

  When all the screws at the bottom are removed, return your Qosmio and unplug all connectors.
  As last step remove all screws that secure cover.
  Now you should be able to remove the cover from the base and you should have access to the motherboard.

  Please be very gently. Small error can be responsible for the damage, and you can have a more significant problem than now. Everything you do is at your own risk.
  I can't say for sure, but I think that your motherboard is faulty and must be replaced.

  Good luck

• Qosmio G50-10 q - driver has stopped responding and has recovered

  My father has a Qosmio g50-10 q for more than a year, and as he bought it he could not see the videos with a resolution more than 640 * 480 and preview of the photos by right click on them and select Preview.

  The problem exists on the operating system preinstalled Vista and today Ive tried to install an operating system windows 7 Professional 32-bit edition.
  The problem is he stil.

  I downloaded the drivers from the official website of toshiba.
  After a lot of testing, I downloaded nvidia nvidia drivers but the problem is exactly the same.
  I am a COMPUTER expert, but I've never found a problem not solved like this.

  I can not even go on youtube and watch a video in full screen.
  Whenever I try to play a video, the screen will start to Flash and then the video becomes black and a notification that says "display driver stopped responding and has recovered".

  I can't even see the video demo in the video folder of windows (wild life).
  And the situation really strange when I click with the right button on an image and select Preview. It shows a white or a black image.

  If I press the button of the screen adjustment, the image appears, but when I go to the next pixture I can't see him again.
  If I choose to see a presentation full screen, I can see all normally.
  Its really frustrating for a laptop of this award and I don't know if this problem is drivers or the 9700 M GTS was defective from the start.

  I hope I can find an answer here before I return it to Toshiba

  Thanks in advance

  Hi mate

  I had the same error happened on my laptop satellite.
  The display driver crashed and recovered
  I've updated the display driver and this has solved my problem.

  In your case, it of really strange that you can not watch movies in 640 * 480 or higher
  Maybe you need to update the BIOS. Check if there is a newer version
  If so, then an update of the BIOS would be worth a try

  Sorry, but I have no other recommendation for you outside the update driver as mentioned it has helped in my case

• Qosmio G50 not sound on HDMI

  * Qosmio G50 not sound on HDMI *.

  Hi all

  I hope everyone recognizes the following and would be kind enough to help me. I searched the forum and tried several of the solutions proposed mainly apply to Vista, but still.

  I hooked up my Qosmio G50 to my Philips LCD HDMI cable. Picture is ok, but there is no sound. I tested the cable with a Toshiba Satellite Pro L550 and it works allright. Image and sound work. But this laptop has Intel HDMI audio.

  I am Windows 7 Home Premium 64 bit slot. I improved by upgrading Toshiba DVD of Vista 64-bit. Unfortunately I do not know with certainty if the HDMI audio worked before that. I think so because I used the laptop to watch a movie on a Panasonic plasma. But I don't remember if it was before or after the upgrade.

  Realtek HD Audio device is installed driver version 6.0.1.5923
  Realtek HDMI Output is selected as default playback device.
  Test gives me graphic response (flashing) but no sound from my TV.
  Choose the other audio device Realtek Digital output doesn't change anything and I do not think it would work anyway.
  I tried to remove the device and then reinstalling the original drivers. I tried the REaltek drivers on their site.
  I tried to change the HDMI view only but what does nog change anything either.

  One thing that worries me is that, under his / Realtek HDMI Output / Properties / he supported Formats are no current format. The satellite gives me audio DTS and others. So I wonder if there should be present formats and if so, how can I change that / add a few.

  Please forgive me if there are mistakes in the text. I translate this to a Dutch version of Windows 7.

  Please help me. All suggestions are welcome!

  I found an article of * Support technique Toshiba * but for Qosmio G30. You must set a default to playback HDMI device

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Perhaps, it allows you to...