Qosmio G50: Need advice Vista Ultimate Upgrade

Similar Questions

• Runtime error Vista Ultimate Upgrade

  I recently bought and downloaded Vista Ultimate Upgrade of the site ultimate steal Microsoft.  I downloaded all three components: X 14 - 63453.exe, install.wim and boot.wim.  I am running Windows XP Media Center edition 2005 with Service Pack 3 installed.  In preparation for the installation of Vista, I did a clean install of XPMC edition.  The Vista Upgrade advisor identified all my compatible material.

  Whenever I run the executable file either by hard drive, dvd or USB hard drive, I get the same error: "the application failed to start because the application configuration is incorrect.  Reinstalling the application may fix this problem. "I don't get an error number in the message window, but I get the following in under the errors to the system event viewer:

  Generate activation context failed for E:\Mike's Files\Burned discs\Vista Ultimate 64 bit Red\X14 - 63453.exe. Reference error message: the operation completed successfully.

  .

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  At the exact same time stamp, I get:

  Dependent Assembly Microsoft.VC80.CRT could not be found and last error was that the referenced assembly is not installed on your system.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Research leads me to believe that libraries VC ++ are not included with the installer and therefore need to be installed on my system.  In the case of corrent what application do I need to install to get these libraries?  Office 2007?  If this is not the case, correct, any advice on how to get my Vista downloaded to work?

  Mike

  Hi Mike

  Windows XP Media Center Edition is a 32-bit version of Windows.  You receive the error message because you are trying to level to a 64 bit Windows Vista version and is not possible.  There is more information about the installation of Windows Vista x 64 contained in the link below.

  http://support.Microsoft.com/default.aspx/KB/932795/en-us Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using Vista Ultimate upgrad DVD on the new machine

  I upgraded my computer which had OEM Vista Home of Windows Vista Ultimate Edition by buying an upgrade DVD, now 'only' computer died and I want to improve my new computer that has Vista Home OEM Vista Ultimate using the same Upgrade DVD. The final result uses the DVD to upgrade on a single computer, because the first died. How can I transfer the liscense to this software Vista Ultimate Upgrade to my new computer?

  Perform the upgrade to Windows Vista Ultimate as you normally and if you are unable to activate over the internet, then select the alternative "activate by phone".

• Reinstalled Vista Ultimate Upgrade disc, how can I do a full version licensed facility?

  I bought a Vista Ultimate upgrade version to upgrade my Vista Home 32-bit system. I wanted to update and it would be so 64 bits that takes care of my system. My HARD drive crashed and I had to reinstall from the Vista Ultimate Upgrade disk that I have. How can I make a legal full version?

  Provide your license key is valid for your upgrade DVD you install twice, once as a clean install and then again an upgrade. What you do is 'redeveloped' Vista Vista"which is a route valid.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

• will vista ultimate upgrade to windows 7 Home premium and back up my files.

  will vista ultimate upgrade to windows 7 Home premium and back up my files.

  Hello

  Loy it won't

  Vista Ultimate upgraded to Windows 7 Ultimate edition

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  ____________________________________________________________________

  and read this information, including where is the right Windows 7 Installation Forum for your questions:

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Compare editions of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  Windows 7 Compatibility Center to check software and hardware compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 price:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.

• Satellite A200: After Vista Ultimate upgrade Chicony webcam does not work

  Hello

  I hope someone can help me. For 3 weeks, I have buy the Toshiba A200 with Windows Vista Home Premium and very good built-in Webcam function. I have no problem.

  Yesterday I did an upgrade to Windows Vista Edition full and now the Webcam does not work.
  Every time when I want to launch the following software message come «Please activate the webcam»

  In the it´s control panel that wrote this function of Doesna´t of hardware because the software isn't fair. But I have the right software. I have try the original software on me the hard drive and, of course, I do a download from Toshiba and I try this.
  But I still got the same message.

  Please help me.

  Hello

  I m not an A200 owner and, therefore, I can not say much about this webcam tool, but to my eyes the Chicony webcam software should work with Windows Vista Ultimate Edition, because this version is almost the same as Windows Vista Home Premium. The ultimate version supports more features like Home Premium, but the software is running and must be compatible with both versions of Vista.

  How did you install Vista Ultimate? You perform a new installation of the OS, or you upgrade only the Home Premium-> Ultimate?

  Anyway, currently version 1.0 of the Chicony camera software is available on the Toshiba page.
  You may need to wait until the new update has been published.

  By the way: also check these threads;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23587&MessageID=87055
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24161&MessageID=88732

  Good bye

• 32 to 64-bit Vista Ultimate upgrade "inplace"?

  My daughter now has a red material with the 32 Bit Version of Vista Ultimate 64 bit capable system running on it.

  Is it possible to do a "inplace" Upgrade Version of Vista Ultimate 32 Bit for the 64-bit Version?

  No, you will need to do a fresh install.  See here http://windows.microsoft.com/en-US/windows-vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• the Vista Home Premium, Vista Ultimate upgrade error

  I need to upgrade a laptop Vista Home Premium to Vista Ultimate to connect to a network of MS Server 2008. Home Premium runs on SP2 and I bought an upgrade ultimate retail package which has Ultimate SP1. When I go to install an update (I don't want to erase the old files and OS), I get the following error "upgrade cannot be started, cancel the installation and choose to upgrade to a version of Windows that is newer than the version you are currently using." Roll back the version Home Premium SP1 will allow me to upgrade to Ultimate, or is there something else that needs to be done? Thank you.

  That should do it.

  Here's the General information about your problem:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  And run the upgrade of a Vista operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Ultimate upgrade error - cannot find the driver

  I need to upgrade a laptop Vista Home Premium to Vista Ultimate to connect to a network of MS Server 2008. Home Premium runs on SP1, and I bought an upgrade ultimate retail package which has Ultimate SP1. When I go to install an update (I don't want to erase the old files and OS), installation involves copying the files, collecting info and half an hour in the installation, several times during "Expanding files", I get an error - upgrade can not find a driver file and install is abandoned, no error or anything else code mentions , and I couldn't find anything like this in the forums. There is no external device attached to the laptop. Any ideas?

  Thank you

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx

  Run the above.

  And try to disable/uninstall your anti-virus.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite U200-181 - his plays not after the Vista Ultimate upgrade

  I have restore Win XP disk recovery and upgrade to Windows Vista Ultimate. After you have reinstalled audio drivers (which is installed correctly), I have no sound in my system. All volumes maximum and not silent. It seems that his program (by pressing the sound keys jogdial). But all the volumes on the right level and not mute.

  Hey Buddy,

  I have an idea that might help you:

  Go to www.realtek.com download drivers, uninstall the drivers from the Toshiba website and install the drivers that you´ve downloaded on the realtek site.
  No matter if it s or not, give a short answer. Would be grateful. :)

  Welcome them

• Problem of camera Chicony after Vista Ultimate upgrade on the Satellite A200 - 1CZ PSAEC

  Hey all.

  I recently bought a Satellite A200-1CZ (PSAEC). It has Vista Home Premium preinstalled. But I wanted to be able to connect to my domain at work, so for this purpose, I had to upgrade to Vista Ultimate. The update itself went well, but after the upgrade, I can not the built-in Chicony webcam to work again. I tried to reinstall the software of the camera without success.

  I also tried to plug the driver installation to the place on the PC where the drivers. He says that it is indeed the correct drivers, but there could be missing a post in the INF file. It seems that it must be written specifically for ultimate.

  Anyone got a few other pilots or maybe a solution to this problem?

  -Dan

  Hi Dan

  Please don't be angry with me, but why you n t search here in the forum first?
  Advanced forum search is the option to find related discussions this topic.

  I found this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  Also, here is the solution to your problem
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  Greetings

• Windows Vista Ultimate upgrade

  I bought Vista Ultimate, a year and a half back pay about 170 Euros.

  I want to upgrade my Vista to Windows 7 Ultimate version, do I have to purchase the full product or I option to get the upgrade package, with cheaper rates?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Don't arrive after Vista Ultimate Upgrade Windows Update to download SP1 for Windows Vista

  I have 2 computers were pre-installed with Vista Edition family content and Basic Service Pack 2. Due to a new system of distribution to come in I had to upgrade to Vista Ultimate. I bought the DVD upgrade containing all Service Packs. After removing the Service Pack 2 and Service pack 1 (in that order) Windows Update will not download Service Pack 1

  You have made or has not upgraded Vista Basic to Vista Ultimate computers?

  That said, Windows Update has nothing to do with upgrading a Vista computer.

  Given that these are specific consumer forums, try to publish in the appropriate Vista IT Pro instead-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro forum