Quarter units

Similar Questions

• Toshiba still 2 write - when they are available in the United Kingdom?

  I'm desperately looking for a tablet of budget / 2 in 1 laptop that will allow me to take decent notes with a stylus. The Surface Pro 3 is beautiful but out of my price range at that time.

  The Toshiba Encore 2 write is available in the United States since the beginning of this year, but when it will be introduced to the United Kingdom?

  I have heard that it should be at the end of the quarter, a.

  I hope that would mean March 2015 BUT I know different businesses will begin their exercises at different times and there had been no other news releases about this since January :(

  Anyone has any ideas on scales of time for its release?

  Hello

  I found some information about the Tablet still 2 write on this page from Toshiba:
  http://www.Toshiba.co.UK/press/releases/Encore-2-write/

  You will find the info yet 2 tablets to write will be available in the United Kingdom during the first quarter of 2015.

  So please stay tuned and check the availability of the tablet on a regular basis.

• NEITHER 9237 quarter bridge absolute accuracy

  Given a NI 9237 bridge completion Module with NI 9944 accessory Terminal strain gauges and 120 ohms with GF = 2.11, how calculate we precision of strain?

  I was told that the absolute accuracy for bridges of quarter is given by

  Absolute accuracy = (Gain error * reading) + (error offset * range) + noise + half bridge watchkeeping tolerance tolerance.

  Since I'm on the NI 9944, watchkeeping tolerance would be 500 uV/V (given by OR R & D). The tolerance of half bridge is given in the manual OR 9237 being 1.2 mV/V.

  (1) it has no value of 'Noise' of entry for bridges on watch in the NI 9237 manual; We use only the sound of half-bridge?

  (2) if I use a sample rate of 1,613 kech. / s (the rate guaranteed valid sampling for the NI 9237 module) and my system is always in his 1st year of use, always is my gain error 0.05%? It is worth noting that 0.05% applies to the 50 kech. / s ; If the gain error does not apply to my low sampling frequency, how can I find the error of gain?

  (3) if my maximum/minimum deformation measures around 600 EU (microstrains), how can I change my values "Reading" and "Range" in the equation for absolute accuracy above, if they need to be adjusted?

  (4) why the absolute accuracy for a quarter-bridge set up does not include the half bridge tolerance?

  (5) is the equation for the conversion of precision of voltage precision for quarter of a bridge, of the strain , where U is the precision of the voltage given by the equation of absolute accuracy above.

  Example of calculation using the values assumed for quarter-bridge:

  Error error/gain Offset = 0.05%

  Reading distance / = 25 mV/V

  Half bridge noise = 1.6 mV/V * 3

  Half bridge tolerance = 1.2 mV/V

  Tolerance of watchkeeping = 500 uV/V

  Absolute accuracy = (V/V 0.0005*.025) + (0.0005*.025 V/V) + ((1.6e-6) * 3 V/V) + (1.2e - 3 V/V) + (500-6 V/V) = 25 mV/V +/-1.73 mV/V

  Accuracy of the strain =-4(V/Vex) / GF (1 + 4 (V/Vex)) = - 4 * (25 mV/V +/-1.73 mV/V) / (2.11) * (1 + 4 * (25 mV/V +/-1.73 mV/V))

  How to simplify this precision of strain to get a reading + / range of precision?

  Thanks for any help.

  (2) if I use a sample rate of 1,613 kech. / s (the rate guaranteed valid sampling for the NI 9237 module) and my system is always in his 1st year of use, always is my gain error 0.05%? It is worth noting that 0.05% applies to the 50 kech. / s ; If the gain error does not apply to my low sampling frequency, how can I find the error of gain?

  This applies at a rate of 50 kech. / s. lower data rate can have up to 0.20% gain additional error reading.  This can be found on page 24 the unit operating instructions and specifications document

  You get to know how to calculate what percentage of Reading (Gain error) I'd get according to what sampling frequency use? Otherwise, I guess I could use the error of gain of 0.20% in the worst case scenario.

  Yes, I so calculate the error of Gain for the worst case scenario (0.2%)

  (5) is the equation for the conversion of precision of voltage precision for quarter of a bridge, of the strain , where U is the precision of the voltage given by the equation of absolute accuracy above.

  Yes, I think it's the correct equation.

  It is more a matter of math - since you will be in the form of a reading + / a range (for example 25 mV/V +/-1.73 mV/V), do you know how I simplify or interpret the accuracy of strain after its replacement by the U-value?

  Accuracy of the strain =-4(V/Vex) / GF (1 + 4 (V/Vex)) = - 4 * (25 mV/V +/-1.73 mV/V) / (2.11) * (1 + 4 * (25 mV/V +/-1.73 mV/V))

  Just reuse the worst cases to calculate positive and negative values on 1.73mV.

• When are you going to release the Xperia Tablet Z in the United States?

  It was announced at the Japan, will be on the Community market on April 13 (?)... Ask yourself when it comes to the United States?

  You can check the Xperia bog @ http://www.xperiablog.net/2013/03/07/xperia-tablet-z-on-sale-in-japan-on-22-march/

  The wifi version is scheduled for March 22. World release 2nd quarter of 2013

• Get the data from the current quarter

  Hello

  I was wondering how I would go about getting data from a table that is in the current fiscal quarter?

  It's the simple query to get all the data:

  $q_calls_sql = "SELECT * FROM renewal_contact WHERE userid ='". "." ' $user_id. "'";

  $q_calls_query = $con-> query ($q_calls_sql);

  $q_calls_numrow = $q_calls_query-> num_rows;

  Here's what I currently show the quarterly data, but only shows do not all data:

  $q_calls_sql = "SELECT."

  OF renewal_contact

  WHERE the timestamp > = GETDATE(), DATEADD (qq, 1, getdate ()) & & timestamp < GETDATE(), DATEADD (qq, 2, getdate ()) ';

  $q_calls_query = $con-> query ($q_calls_sql);

  $q_calls_numrow = $q_calls_query-> num_rows;

  All I have to do is show the num_rows of the above query.

  MySQL QUARTER() function deals with calendar quarters rather than the fiscal quarters. In the United States, first by the federal Government's fiscal quarter begins October 1, dealing with MySQL as in the fourth quarter. The first fiscal quarter in California begins on 1 July, that MySQL considers (rightly) as of the third quarter.

  A way to get the quarter is to use a custom like this function:

  function getFiscalQuarter() {
    $month = date('n');
    $year = date('Y');
    switch ($month) {
        case 1:
        case 2:
        case 3:
            return ["$year-01-01", "$year-03-31"];
        case 4:
        case 5:
        case 6:
            return ["$year-04-01", "$year-06-30"];
        case 7:
        case 8:
        case 9:
            return ["$year-07-01", "$year-09-30"];
        default:
            return ["$year-10-01", "$year-12-31"];
    }
  }
  
  $quarter = getFiscalQuarter();
  
  $sql = 'SELECT * FROM renewal_contact
          WHERE `timestamp` BETWEEN "' . $quarter[0] . '" AND "' . $quarter[1] . '"';
  

• How to calculate an average for each quarter in a year

  Hello world
  
  
  I have a table that stores all the unit tests for the data. I'm figuring avg unit tests that have been recorded by quarter in one year
  
  I tried with avg and the meter, but I'm sure that the results returned are not perfect
  
  Help me in this scenario.
  
  Thank you
  Sriks

  user10699584 wrote:

  so if there are 10 unit tests then the avg is 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10/10

  It is a weird way to definig average. Anyway, why:

  2005-2 Q 5 2.5

  According to your package:

  (1 + 2 + 3 + 4 + 5) / 5 = 3

  not 2.5. I'll assume that it's a typo. Now based on Mathematics:

  1 + 2 + 3 +... + n = (1 + n) * n / 2

  The foregoing your 'average' would be:

  (Count + 1 / 2)

  Also, I suspect tc_vts column data type is DATE, if so:

  select  to_char(tc_vts,'YYYY-Q"Q"') "year-Quarter",
          count(*) "Total cases",
          (1 + count(*)) / 2 "Average of total cases"
    from  Testcycl
    group by to_char(tc_vts,'YYYY-Q"Q"')
    order by "year-Quarter"
  /
  

  SY.

• My iPad is registered in the United States, but I live in Germany. I want to change it now to my German address. What are the implications?

  I bought my iPad 3 to the United States by giving a U.S. address. I had assumed (perhaps wrongly) that give my German address would be denying me access to the English user interface.

  I live in Germany and I have a iPhone5s that I bought here in Germany where I live.

  I want to "App PAYBACK" (which helps me to accumulate points when I shop here in Germany) to use on my iPhone5s , but when I search in the App store, I see only a Mexican version. When I tried to download this app on here https://www.payback.de/app

  I get the message "not available in the US store.

  When I communicate with the help of Apple, told me that, if I switch to my German address the Apps that I downloaded from the US store may not get an update whenever they are released.

  Are there other problems that I should wait if I move to my German address?

  Hello

  Go downstairs homepage itunes itunes page by Email support

  See you soon

  Brian

• I bought my Iphone7 United States, is it guaranteed in India?

  In fact I bought my phone at home I want to ask that is it is guaranteed in India

  No, the iPhone must be returned to the United States for repair or replacement.

• iPhone 7 dead LTE in the United Kingdom

  Bought the iPhone on Apple store 7 in. I tried to find out why the 4 G/LTE does not work on the apple support unit had no alternative but to refund... Are all iPhone 7s sold to the United Kingdom having the same problem?

  Take it back to the Store where you bought it and ask them

• We have dish as a TV provider in the United States.  We have an Apple TV 3rd generation that we use in the Mexico.  Even if I connect to my account of dish, I can't Apps to work on the Mexico.  Applications such as CNN GO.

  In the United States I have the dish as a TV provider.  I can connect flat with my 4 Apple TV version and look at Apps like CBS, CNN, go, etc...  When I try to do the same thing in Mexico with my 3 Apple TV version these same apps do not work.  In Mexico, I have tried resetting everything and through other steps proposed in this forum.  Nothing has worked.

  Hello. I think they can tell where you are by your IP address. Their servers can block content if they are not allowed to provide at your location. You can try to contact the dish.

• Siri has a quarter vote?

  Siri has a quarter vote?

  N °

• How to activate facetime for the Arab Emirates UNITED

  I brought the Iphone 6s in Dubai

  My iphone 6s without factime

  I want to get Facetime

  Help, please

  If the iPhone is a native of the United Arab Emirates and you have already put your operator's SIM card (this will only works in a few countries and all those who are in the Middle East), you cannot get it. iPhones that fall into this category have AB, AE or possibly AH just before the slash in their model numbers.

  If it came from another region, check the restrictions of the device.

  (145035)

• FaceTime on the UNITED Arab Emirates have bought iPhone 7 when return to the Netherlands

  Hey, I am currently a few months in the UNITED Arab Emirates. Here, the iPhones are cheaper so I want to buy an iPhone. However I heard that it may be a problem with FaceTime. Can I access FaceTime etc as soon as I put my SIM back in or through I will never be able to FaceTime with phone purchased WATER?

  see you soon,

  Sebas

  Hello. You will not be able to access FaceTime if you buy the iPhone in the UNITED Arab Emirates and use it in any other country.

• My billing address is in the United Kingdom.  Currently, I try to order a book iphoto outside the United Kingdom project.  I get a message indicating the country not supported.  Any ideas please on how to proceed?

  I am trying to buy a photo book.

  I get a message saying that "orders must be shipped in your billing country.

  My ID apple is up to date and my billing address and House are in the United Kingdom.

  Please tell us how I can move forward. Thank you

  Concerning

  Christophe Clark

  Apple is no longer offer these services from iPhoto or Aperture, and have not changed since March 31.

  You need only generate a pdf and find a 3rd party printing service.

• Lion at El Capitan iPhoto update does not update iPhoto not available in the United Kingdom

  Lion at El Capitan iPhoto update does not update iPhoto not available in applications to the United Kingdom

  The iPhoto application has been replaced by the Photos app > Photos for OS X - Apple iPhoto support update