"Querying volume for available shrink space" does not
I tried to create an empty partition on my 500 GB drive C (which I still have more than 350 GB free) to be able to dual boot another OS next to my already installed Windows 7 Ultimate 64-bit, but I encountered a problem from the beginning. While trying to shrink the space on drive C for the partition, the computer management hangs on 'Volume mark for available shrink space' for about a minute, and then said computer management "not responding". I have retried several times, and I still have the same result. I tried running "sfc/scannow" as administrator CMD, but there is no problems found. Afterwards, I checked errors on drive C, but the result is always the same. I don't know how to go further with this problem. Any help would be greatly appreciated...
Here are a few options:
- Use a third-party disk manager, or a commercial (e.g. Acronis DiskDirector) or one that is free.
- Use diskpart.exe in a command prompt if you are comfortable to work at this level. It might give you a more explicit feedback. Here is what you would see:
d:\>Diskpart
Microsoft Corporation.
On computer: ACORN
DISKPART > select disk 0
Disk 0 is now the selected disk.
DISKPART > detail disk
Crucial_CT512MX100SSD1 ATA Device
. . .
Volume # Ltr Label Fs Type size status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Healthy Volume 1 c System NTFS Partition 68 GB system
Sound data 2 D NTFS Partition 97 GB Pagefile volume
Volume 3 e drivers NTFS Partition 310 GB healthy
DISKPART > select partition 3
Partition 3 is now the selected partition.
DISKPART > retractable help
(read the help text)
DISKPART > shrink Desired = Minimum 150 = 100
DISKPART > exit
Tags: Windows
Similar Questions
-
I'm trying to reduce my Windows 7 partition but the computer management tool is stuck on "volume volume queries for available shrink space, please wait". I used to have a Linux installation on it earlier and I uninstalled it properly, but Windows still work, so that could be the problem. Anyone have any ideas?
I don't know if l could help but try the system, sfc file Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
And after doing so clean the PC boot to see if you can access disk management
-
Lack of available disk space; does not recognize that I have deleted files
Today I found out, I had 2 GB left on my hard drive 150 GB (Windows XP Home edition, HP mini, purchased mid-2010). I deleted about 20 GB of different files is no longer needed. The properties of my C drive still say it be only 2 GB of free space, as if these files have not been deleted. How can I force to actually evaluate disk space? He always acts as if the hard drive is full, I can't save anything bigger than 2 GB because he thinks that's all he opened.
I tried disk clean, defragment, properties of the material, Manager Matrix Storage Manager hardware, intel and now compress, then decompress it. He still refuses to admit that I released 20 GB of space.Hi akbk28,
I suggest that you perform a cleaning disc again and see if it helps. Check out the following link and make sure that you follow the steps mentioned.
-
* Original title: charging the battery
My battery stopped charging. For four days, the power button says "59% available (plugged in, does not support)."
How can I get the computer to start the battery again?
The battery is probably faulty. You can say as follows:
- Shut down Windows.
- Remove the battery.
- Wait an hour.
- The power supply is cold? If Yes, then the laptop consumes no power (which is normal).
- Insert the battery.
- Wait an hour.
- The power supply is hot? If so, the battery is recharged.
- Start normally and check the charge level. If she's still around 59% while the battery no longer accepts the full load. You need to replace it.
-
volume and the touch screen does not work
good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy
OT:
my / Tablet PC
Dorothy salvation,
Thanks for posting your query in Microsoft Community.
I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;
- When was the last time that the two have worked?
- Remember to no particular change in the device before the show?
- Since the touch screen does not work, you are able to use the options settings?
The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.
Method 1: Run the troubleshooter of material and check if that helps.
a. type in the right edge of the screen, and then click Search.
(If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.
c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.
Method 2: Update the drivers
Step 1: Update the driver through Device Manager
a. press the Windows key + X , and then click Device Manager
b. expand driver Sound
c. make a right click driver, and then click Update driver software
Step 2: Install the Windows updates pending
To check the updates:
Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.
Press or click check nowand then wait while Windows searches the latest updates for your PC.
If updates are found, tap or click install updates.
Read and accept the terms of the license and then press or click Finish if the update requires it.
Restart the computer for the updates to be applied.
Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.
You can also check: touch and pen settings: FAQ
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
This is the second time I've been here for help and I had to use IE in recent weeks because I still I have this problem. The pictures on individual E - Bay auctions start to load then stop, I think it is a Javascript problem. I already tried the troubleshooting tips for the "images are not displayed" AND I uninstalled/reinstalled Firefox without result. My space does not seem to be display correctly, for example, if I want to change the color of a font in a message boxes appear, but no color... Please HELP somebody! Thank you!
URL of affected sites
http://CGI.eBay.com/WS/eBayISAPI.dll?ViewItem & Item = 230497781181 & ADME:B:SS:US:1123 = getting
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problemsIf this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
.
You can also try to 'Reset all the preferences for the default user of Firefox' on the starting window of Firefox to solve the issues in Safe Mode - see http://kb.mozillazine.org/Resetting_preferences -
the volume on my laptop lenovo does not work
the volume on my laptop lenovo does not work, I ran the troubleshooting but he days my driver does not work properly, I have uninstalled/reinstalled but still have the same issue - no volume. everything I've tried has not worked. I can't put the volume up and down but always the same volume no matter what I try! Could someone please!
Hello
1. you receive an error message?
2 did you change on your computer before this problem?
3. what operating system is installed on your computer?
What version of the operating system Windows am I running?
Follow the suggestions and see if it helps.
Method 1
You can follow the steps and see if it helps.
(a) right click on the Volume icon in the Notification area.
b) click on tab reading.
(c) right click on the box empty.
d) select Show disabled devices.
e) right click speakers and select allow.
f) right click on speakers and go to the Properties.
g) select use this device from the use of the device.
h) click apply and OK.
Method 2
If it was working fine before, you can restore the computer settings to a date where he worked very well earlier.
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
See also:
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Sound cards: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sound-cards-frequently-asked-questions
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
-
Bank accounts is not available. connection icons does not
Bank accounts is not available. connection icons does not
Hello
Thanks for the above information.
1 have you tried the methods mentioned in the post above?
I suggest you try the steps from the link below.
You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444
Registry warning
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/322756/ )
If the problem persists then I suggest you contact with the support of Barclaycard from the link below.
http://www.Barclaycard.co.UK/personal/contact-us
Hope this information is useful.
-
Software for embroidery machine Pfaff does not work
Have a new computer with windows 7 installed. Old program for the sewing machine does not work. Suggested that I go to creative 3D as a correction and some people say that it works with 7. Can see some of its parts at the opening, but the main game continues to tell me that the HASP is missing (-3). I googled until I'm crazy nearlly and have installed all the latest drivers available on the computer. Can someone please guide me through the maze because I feel that I am close to her but not how to get there again.
Thanks, Lesley
Unfortunately, we have already tried the links above which I thank you for your suggestions. Now, we will contact pfaff which I did not really expect an answer, I asked a question before.
Again thank you and if someone else could suggest I would appreciate
Lesley
-
I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.
Settings > privacy > location Services > confirm you always give permission to these applications to use your location.
If not, try these standard troubleshooting steps.
-Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).
-Restore your iDevice: https://support.apple.com/en-us/HT204184
If your backup is in iTunes, make sure that it is encrypted.
-
File sharing Mac for iphone via Airdrop does not
File sharing Mac for iphone via Airdrop does not. Please suggest me.
In the finder of mac and iPhone, I clicked on "Let me o find out for everybody". IPhone is still not release shows.
IPhone is the model of 5 s (10 iOS) and mac MAc mini end of 2014 (OS X EL Capitan - 10.11.4).)Cross the writeup here. Make sure that both devices have Wi - Fi and Bluetooth connection 'On '.
Use AirDrop to send the contents of your Mac - Apple Support
-
AppleID asks a password for an ID that does not exist
When I try to update my apps on my phone I wonder to enter a password for an AppleID that does not exist.
I am connected and can't seem to download applications, but not updated. I don't have this problem with my iPad using the same account, just the iPhone.
Help please!
Girlactik wrote:
When I try to update my apps on my phone I wonder to enter a password for an AppleID that does not exist.
This identifier Apple is not simply "composed" without any basis.
- The iPhone is already possessed? Maybe it's the Apple ID of the previous owner?
- Maybe it's the Apple ID you entered by mistake at settings > iTunes and App Store? Or settings > iCloud?
- Wouldn't be the Apple ID of the owner of the apps? You use apps (or music or books) someone else bought?
-
Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10
Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10
Double post please see also /questions/925441 #answer - 326583
-
My new laptop usb port for the left side does not, only 1 work on 3 Please help me
Hello:
Have you installed the drivers for W7 32 bit amd chipset?
If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.
You want the first file on the Web page.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032
-
WiFi link for printer EPSON-750 does not work
WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work
Have you also tried to restart the router?
Maybe you are looking for
-
Tecra S10-10th revision necessary
HelloDoes anyone found a review for the Toshiba Tecra S10 - 10F P8600?
-
DV6 - 2150ca does not start after upgrading RAM
I have HP dv6 - 2150ca with Windows 7 Home Premium 64-bit. I had 4 GB of RAM. I move to 8 GB of RAM. Both from the same manufacturer and purchased at the same time. RAM card http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+DV6+series/Pavili
-
How can I get my card to bracts newspaper to zoom to get closer to an order of magnitude?
I have data may vary over several orders of magnitude and sometimes vary closely. To properly handle the former, I chose to use a logarithmic scale on the graph for these data. However, when the differences are subtle, the graph does not close any ti
-
Is it possible to deploy RDC 7.0 (KB969084) via WSUS? I searched WSUS and I don't find it as a patch approvable.
-
HelloThank you for taking the time to read this post.We try to create 2D (datamatrix) barcodes in BIPublisher report. We are on Oracle 11.5.10 applications and BI publisher is 10.3.4.1Follow the instructions on the links following but still unable to