Question about keyboard English / Korean

Similar Questions

• Re: Toshiba M70-165 (PSM70E) - question about keyboard

  On an old Toshiba laptop Satellite M70-165 (PSM70E), I installed Linux 13. But this laptop seems to have a strange keyboard. I think it's Spanish, since there is a right to the letter, and there is a on the letter as well. But every single Spanish keyboard, I checked on the internet is different from this 86-key keyboard that I have.

  So I'm rather perplexed and I hope you can help me... Thanks in advance!

  And what kind of help do you expect now?
  You want to buy a new keyboard for another language or change some keyboard with good?
  Can you please post exact model part number?

  Is your keyboard layout identical with this one I found in s manuals Toshiba?

• Question about keyboard input language settings

  Some wrong characters when you press on pump keys. for example: "when printing on keys 2 gives a @ onscreen, while that, you guessed it: @ gives '." "

  I think I got some settings wrong somewhere, I put everything to the United Kingdom in the language folder in the control panel (also in advance).

  It's probably pretty simple, but annoying, as usual, it is difficult to find what exactly to do in windows.

  If anyone knows what to do, please let me know.

  Hello

  As far as I know if you instead of, you just change the keyboard input language. Please click the taskbar with the right button of the mouse and go to Toolbars > and enable the language bar option. On this way, you can see which input language is active.

• question about keyboard

  using HP PAVILLIION g7 2010nr

  need help understanding keyboard like the keys are not 1-12

  How can I make them work the way I want

  example - f11 is usually to help get into the safe mode TU where is f11 here?

  Thank you for the help

  Thanks, it works, now I just need to know what will do the different keys

  rickp400 wrote:
  

  some laptops have a func button you press on # at the same time

  and f11 is the recovery mode, and if you try to get into safe mode, press f8

  soon the hp logo disappear press f8 and hold for a few seconds

  Thank you, Rick, now I just have to figure out what will make the different keys

  How can I send a "kudo".

• Question about keyboards keys Tecra A3

  I have a whole new Tecra A3 and when you type certain keys randomly will work. Occasions, I can type or press a key several times until it works.
  Is there something I can do before I return it to the dealer?

  Hi Bob

  It's really not easy to say why this is happening. The only thing you can try is to reinstall the OS using the recovery CD.

  In my opinion it shouldn't happen if the unit is a new brand. Please contact your dealer and ask him if you can have another. You paid for a new product and it should work properly.

• Material, bilingual, English/Korean keyboard

  Microsoft makes ergonomic bilingual, English/Korean?  I'm learning the Korean language.  I prefer to be able to have a physical keyboard that allows me to easily switch between the inputs of both languages.

  Thank you

  Hello

  Thank you for your response. I appreciate your efforts to resolve the issue.

  I understand that you need a physical ergonomic, bilingual Korean/English keyboard. You can find the keyboard of your choice and buy on the below given link:

  http://www.Microsoft.com/hardware/en-us

  Hope this information helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Where should questions about the JDEV/ADF positions?

  Hello

  Where should questions about the JDEV/ADF positions?

  JDeveloper and ADF or

  JDeveloper and ADF?

  I found there may be some different advantageous:

  https://forums.Oracle.com/message/11109674?TSTART=0#11109674

  Thank you.

  Well, the other forum you mentioned is the Korean equivalent of the English forum.

  You have already discovered, it is not controlled to many users. I didn't know that it exists at all.

  In general it is to you where you ask your questions. All for one here are driven by the community and some employees of the Oracle, you cannot wait has answered all your questions. If you really need to answer you go through paid support.

  A tip for getting help is to provide a well-defined use cases, information relating to your environment and documented code showing what you have already tried.

  Timo

• Where can I ask a handful of general order questions about Firefox OS as a consumer and get the answers? (a forum or something similar)

  I have about seven questions about Firefox OS. I'm potentially interested in opting for a tablet that works instead of Android or iOS. I couldn't find a place to ask questions like that. Thank you!

  https://support.Mozilla.org/en-us/forums/Firefox-OS-English-Forum

  There is another option.

• Many questions about the HP 50 g

  I just ordered a HP 50 g graphic calculator! I have a few questions about this so hang on tight! What is the USB connector on the calculator? Mini-USB, micro USB, or is it a connector owner, "custom". Then, it would be possible to connect a keyboard to the HP 50 g by using the USB Port? Is there a program that would make this possible? (I doubt it would work if you plug it..) I have a Mini-USB to female USB 2.0 connector. So I could just plug the keyboard right, provided that the port on the calculator is a Mini-USB Port. If this is not so that I could use my female to female USB adaptor to connect the keyboard.

  Thanks for your help,

  Zekelegge

  Hi!, zekelegge:

  Welcome to Forum!

  The only printer I use, 50G calculators, 48GII, 39GS and 17BII +, as well as many former models, such as the 48 s/SX/G/G + / GX, 38 G, 39 G, 42, 41 C/CV/CX and 28 C/S, is the infrared printer HP 82240 b. If you can use the emulator HP50G, on the PC, the simulator of the printer, you can download, since... http://www.HPCalc.org/details.php?id=7386

  The printer... HP 82240 B

  

  The cable series...

  

  The description... http://www.allenwan.com/hpcalcserialcable/

  The original cable...

  

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• I want to ask questions about all kinds of drivers Format?

  Welcome to all here and sorry for my bad language in English

  I want to ask questions about format player a full format and quick format like this

  Format X:/q and format X:/s

  because I format my hard drive a lot of time

  I heard that it's in trouble and sometimes I heard that quick format have no problem and I heard the difference

  so, what kind of format I have much time to do and have no problem

  Incidentally I know well the difference between full and quick and low level format too, so my question to rally is what type of format I have answer it a lot of time and are no problem for my hard drive

  and sorry again for my bad language

  Use the quick format unless you have a specific reason to use the full format.

  Tom Ferguson

• stupid question about UAC

  OK, it's a REALLY stupid question about UAC.

  I have several icons on my desktop. Some of them are games that must be run as administrator in XP compatibility mode.

  I rarely accidentally tried to open the icon, particularly if you use the keyboard to choose what I want.

  Is there a reason if I accidentally open a game that pushes me in height DO NOT hit 'Cancel' if I didn't intend to play the game at the moment, but trying to open something else? Something like a process being left in suspense, memory leaks, or any other reason why I can't Abort to launch the application to the UAC prompt?

  Hey, Slick,

  Clicking Cancel will prevent the running total process if you do not have to worry about the still ongoing services for memory leaks or game, etc..
  I hope this helps.