Question about to leave apps and cleaning

Similar Questions

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• Two questions about the shortcut app keys

  Hi, there! ~

  As we know, we can assign a keyboard shortcut to our applications for the quick start, but there is something different between my apps and os, my apps and os applications will show their hot keys on the home screen, it looks like figure 1 and figure 2, but in the screen switching Applications, my apps will always show shortcut keys and applications from the os will not looks like figure 3 and figure 4, my first question is how do my apps looks like os apps?

  

  Figure 1

  

  Figure 2

  

  Figure 3

  

  Figure 4

  And then my second question is how to enumerate all the shortcut keys assigned in the system of the device?

  Thank you!!! ~

  The reason for the issuance of keys to switch Application screen, is that I have been called the HomeScreen.setName method to change the display name of my application.

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Qosmio G20: Question about networking & monitor in and Xbox

  Just bought a G20 last week and I'm in love. First laptop I've ever owned and its worth every penny.

  A few scarecrows.

  I never received an antenna adapter to connect my in arial, but I'm sure I sohuld of fact. In the quick start manual of what it listed everything that I should received in the pack, and who was listed. Was not enough one - if anyone knows a number to contact Toshiba and get one of these sent to me? Can't seem to find one anywhere.

  Second... I'm going to my brother's computer network. Novice course of network, it does not work that well. I'm not sure whether if we need a router? I just want to connect to his computer and use the internet through that. As you would with a network cable. So he bought himself a wireless network card... but we'll be buggered if we can get it too work. Any advice or a definitive guide... or do we this router after all?

  And thirdly, sorry for the long post, but I'm playing my Xbox by the G20, but I'm having no luck what so ever. I plugged the monitor using the three composite cards (white, yellow and red) but nothing that passes through. The only way I've seen a photo is when you set up a decoder and it happens in a small box when its analyses for channels... but I can't select to see and it seems s delay 1 second.

  Sorry for the post long-term... just try to make it all sorted.

  Thanks in advance for any help.

  Hello

  You are right that the Qosmio is a very nice unit.
  But I'm not sure about the antenna adapter. I found the information in the user manual that the antenna adapter is optional. In this case the adapter will not always come with the laptop, but you can ask that the Toshiba service partner.

  Well well, on the network connection: If you want to connect two computer, you need a crossover network cable if you don t use the router. In addition, two laptop computers must be in the same workgroup. In addition, you must manually set the IP address, the default gateway and the subnet mask in the internet protocol TCP/IP properties.

  On the Xbox:
  If you want to know more on the connection of MCE and Xbox, see this Microsoft Web site.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Check also questions other messages of the forum on the Xbox:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794#33794

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9756&MessageID=34462#34462

  Good luck

• Question about the Apple Watch and tattoos

  I think buy a Apple Watch very soon.

  I have a full sleeve (which is where I would like to wear the watch) and I wonder if it will cause problems with readings with the heart monitor since I want to use the Apple Watch for fitness training, mainly.

  I read on the page of the heart rate for the saying of Apple Watch:

  "Permanent or temporary changes to your skin, such as some tattoos, can also impact performance heart rate sensor. Ink, model and the saturation of some tattoos can block light from the sensor, making it difficult to get reliable readings. »

  There are other problems in addition to playback of heart rate on the Apple Watch for inked people that may know you?

  Thanks for your comments just to decide if this watch will really be for me before making this purchase, because I missed one for some time.

  If you are looking for, there was a very long discussion about this in the past, only shortly after the release of the Apple Watch. What I've read, it seems that the heart rate monitor is the only victim when it comes to the watch, since this is the only thing that requires the sensors to work through ink. Not all inks makes a difference, but most don't. The activity of exercise/app also uses the heart rate monitor to determine the rate for the year. You can take the time to go to the nearest Apple Store and try on the Apple Watch and see if the monitor works with your sleeve.

• Questions about Amazon AppStore App BlackBerry

  Hello Forum,

  the Amazon AppStore on my passport contains a few nice applications.

  But I have a few questions:

  • AppStore app tells me that there is a possible update. Can I do this without a doubt?
  • Please tell me the way how to remove installed Android apps.

  Thanks a lot for the answers.

  Best regards

  JueDan

  Yes, you can do the update of the Amazon App store.

  Delete same as any other app android applications. Tap and hold the icon. When it pulses, tap the trash icon.

• General questions about backup, restore, upgrade and migration

  Hello

  1 can restore you a backup in windows xp, vista or windows 7 to windows 8 after clean installtion of it, or which is not possible due to differences in file format!

  2. What is the difference beween upgrade and migration in normal version of windows xp, vista, 7?

  3. when pass you any version of windows to superior version whitout a wil stay intact messaging and data backup?

  Thank you

  Johan

  Thanks for all the useful information, my last two questions are:

  1 can spend you xp to 8 or 8.1 pro or Enterprise version?

  See my answer

  2. can you use the original release of windows 7 or 8 in a network of windows server environment or it must be pro, ultimate and Enterprise version?

  Unfortunately not.
  Comapare editions: what each restriction versions are
  https://www.Microsoft.com/Windows/Business/Windows-version-comparison-chart.aspx

  Upgrade to Windows 8.1 of Windows Vista or Windows XP
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-Vista-XP-tutorial

  Note: If your PC is currently provided with pre-installed XP, the processor (CPU) is perhaps not able to support any version of Windows 8 or 8.1 as 8 or 8.1 requires the CPU supported the NX bit. That one version of the Intel Pentium 4 a NX supports, if you purchased a late model XP computer comes with an Intel Core 2 Duo processor, then chances are that it supports NX.

  For more information, see this post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-requires-support-for-NX/f30ec261-4378-4a31-9d46-abb7620dd5ef

  Also download and run the upgrade wizard
  http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ

  J W Stuart: http://www.pagestart.com

• Question about the memory consumed and active

  I have esx4.1 on three dl585 running. I have about 100 active vm running, and I have a small question.

  My vm is all 2008 r2 datacenter and I gave them 1 cpu and 4 GB of ram. When I recover a single virtual machine and look at the summary page, I see the bones of memory consumed host 4075 mb and the active guest memory 81 MB operating system. My question is can I reduce the host cunsumed memory to 2 GB without noticing a difference within the virtual machine?

  It looks like you can.   To be absolutely sure that you'd need monitor assets long enough to have a good idea of what the average is and what are the tops.

• Question about restoring In - App purchase

  We have this scenario and wanted to know the recommendations of Adobe.

  A customer has a multfolio app on the App Store with in-app purchases and active as well suscriptiones. Issues sold for several months. For some reason, he needs change the account of publication of DPS that it uses to publish folios.  He has already copied the current folios to the new DPS account and publishes them with the same folio product ID. He has not touched something else in the In - App purchases setting in iTunes Connect since there is nothing new to change on this section. Only, it creates a new application with the new DPS account ID. Subsequently, the .ipa installed fine and when you try to restore purchases, it displays an error (screenshot attached)...

  Have you ever been in this scenario before? That your suggestions about to compile one application with another account DPS without changing anything of the configuration of Apple?

  I really appreciate your recommendations

  Leo

  

  You must call the Gold support and ask for help.

  Neil

• questions about iOS 10 SMS and iMessage notification

  Hi all

  Having some problems with the SMS and iMessage notification since the upgrade to iOS 10. The problem is that sometimes there is no noise or vibration or anything like that when I get a message. I will just have to pick up the phone and there is a banner on the lock screen. And until someone asks, it isn't that I was away from the phone, or I didn't hear it go off... there was just no notification. It's as if the phone was in DND (which it was not).

  The other thing is, I NEVER receive a notification when I am sent an iMessage from a sender that is the only email address (like an iPad wifi only). In this situation, my phone never plays a sound never vibrates... you open the lock screen, but there's a new banner of message sitting there... as I said before - just as the phone is in DND... which is not.

  This problem happens on mine and my wife's phone. For any help or suggestion would be greatly appreciated.

  Here is an update. I think I can find a solution to the problem. I used to have my "send and receive" in the messages app implemented with my phone number and checked e-mail address. I have deselected the e-mail address and have now received a notifcation for every message I've received so far. The sample size is a bit small at the moment but before this change, it is 50-50 at best.

• Designjet Z2600: Questions about head of ink and printer maintenance

  We have recently acquired a printer, Designjet Z2600 24 "large format.  A few questions so we can know what to expect:

  • Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently.  We plan on it using every two weeks, but there may be times when a month or two will pass between uses.  Is this a problem?
  • Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
  • Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?

  Thank you!

  Hello

  The recommendation is to keep it at any time.

  If you use the printer turns off completely the power button.

  When not in use, it will go in standby mode, wake up maintenance and sleep.

• Question about batteries for laptops and a station (HP Elitebook 840)

  Hello

  I have a question for plagging the laptop to the docking station and battery, basically my main concern is not to connect to the laptop to run a/c, while it is fully charged and I'm always load only up to 100% and then when it reaches the minmum load then I connect it comes back to a/c, so my question here

  So do you think that that plug the laptop into the docking station will not decrease the duration of battery life because it will always be in charge mode?

  Thank you.

  After this announcement, I made a simple google image search with different keywords before 'docking and battery' and I found the following thread that answers my question

  Docking station ruin the battery?

  http://h30434.www3.HP.com/T5/notebook-hardware/is-docking-station-ruining-the-battery/TD-p/3249345

  Thank you rcspencer

  Thank you.