Question about VMKernel iSCSI traffic and VLANS

Similar Questions

• Question on the iSCSI initiators and several NIC

  I read the attached document.

  The document speaks to create more iSCSI initiators to talk to the SAN (I understand this bit).

  Page 15 step 4: VMkernel Ports associated with physical cards

  The document speaks about 3 network cards that have been attributed to a vSwitch.

  The document then continue to talk about the creation of links to individual access to a network adapter for each VMkernel path.

  My question is:

  Why do this?

  Why not create three separate vSwitches and create an initiator iSCSI for each vSwitch?

  VCP3 & VCP4 32846

  VSP4

  VTSP4

  Why would you not create a vSwitch for each iSCSI NIC and VMkernel port. Why the document insists on putting all the NIC in a vSwitch?

  The number and type of vSwitches is not interesting.  You can use a vSwitch or vSwitches as much as you have physical NIC.  It works as well for the former two vSwitches static or vDS.  The configuration example is just one of the ways that you can do.  Any combination is supported.

  Andy

• Questions about syncing wireless keyboard and mouse 5000?

  How can I sync my old 5000 for a new mouse 5000 keyboard and the receiver?

  Hello Eamon,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that you are facing problem when connecting the new Microsoft mouse USB dongle receiver with the old keyboard Microsoft Wireless 5000.

  I suggest you to contact the Microsoft Hardware support for assistance.

  How to contact Microsoft if you have questions about your hardware device.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Question about the composition settings and make

  I looked for an answer to my question, but had to ask at resort, sorry, it's pretty basic, but a direct response is needed I think.

  I imported a project in Premiere pro with two layers of still images with movement and applied effects. I work for a few weeks now, with variations on these pictures and had many number of exports of EI through the render queue.

  After you import the compositions of first CC my starting point; composition and other settings of composition parameters are all resolved HDTV 1080 25 but the set resolution in which I unfortunately now has, is defined as 'Half' (960 * 540)... New compositions also sets the default resolution somehow half...

  My question is about my previous exports and subsequently.  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module? So far, all my renders are 1080 p by default and no 960 * 540. These have been uprezed to 1080 of 960? ... - I have not changed any setting on the resolution in the rendering module - they all came out 1080 after.

  Thank you

  Together of the composition to "Half" resolution affect the quality of my compositions exported using the render module?

  N ° except if you change the settings of default rendering, which is "Best settings" in "current Configuration".

• A few questions about integration between POET and EBS

  Hi you
  I am a new bie BIEE. In those days, have a look at the POET architecture and BIEE components. In the next project, there is some work on the development of POET based on request of the EBS. I have a few questions about integration:
  
  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?
  
  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?
  
  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?
  
  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?
  
  could someone give some pointers for me? I am very appreciated if you can also provide any other information.
  
  Thanks in advance.

  (1) generally, the POET application and database server is decentralized with application and database EBS? Both BIEE 10g and 11g version can be integrated with EBS R12?

  You shud look at OBI request here that uses OBIEE as a tool for reporting with pre-built modules. 10g & 11g comes with different versions of the applications of BI that supports sources such as Siebel CRM, EBS, Peoplesoft, JD Edwards, etc...

  (2) in the POET administration tool, the first step is to create arrays of physics. If the source application is EBS, is it still necessary to create the physical tables?

  His independent of any source. It comes to OBIEE modeling to create the RPD with all the layers. If you build from scratch, then you will need to create all layers else if BI Apps is used so you can get pre-built RPD and other pre-designed components.

  (3) if the physical creation of tables is needed, how to transfer data from the source of BSE BIEE physical tables tables? What ETL tool is preferred for most of developers? generator for warehouse or Oracle data integration?

  BI apps comes with ETL pre-built mapping to use with the tools majorly with Informatica. Only applications BI 7.9.5.2 comes with ODI, but oracle has the intention of having only ODI for any other versions.

  (4) during the data transfer phase, there are many many large data to transfer, how to keep the entire? for example, it must transfer 1 million lines of source to physical tables BIEE database, when 50% is completed, users try to open the POET report, they can see the new data of 50% on the reports? is there some transaction in phase control ETL?

  User will see still old data because its good enable Cache and serving it after each load.

  See http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html...
  and a lot more docs on google

  Hope this helps

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Question about removing a HOST and add it again with the other IP management

  Thanks in advance for your help.

  I have an environment with two centers of data/clusters inside my virtual Center 2.5

  One of her consistes of clusters on two ESXi 3.5 licensed nodes. Each of them has 2 VMKernel ports form management. One of them has an IP (A.A.A.1) with any VLAN, the other port is in VLAN111 and IP (B.B.B.1). The other host ESXi has A.A.A.2 and B.B.B.2 IP.

  The other cluster has two 3.5 ESX (not i) and they have a single port/IP managemente (in the VLAN111, which is the same as the other cluster)

  The first cluster appears associated with the virtual center with the No.-VLAN port (IP A.A.A.1 and 2). Is a problem for me because I need to access the first cluster of other machines having no visibility on the A.A.A.x subnet, but it has visibility to the VLAN111. If I connect to the virtual Center, he shows me the IP A.A.A.x but when I try to access them, I can't.

  I would like to do the following WITHOUT affecting the first cluster:

  -Remove each host in my Center Virtual (The VM will continue to work without problem?)

  -Add each host the virtual Center, but this time I'll add the IP VLAN111 (B.B.B.x)

  My question is if these will generate instabilities problems on my dock.

  Thanks in advance

  This process has worked for us when the old VC (2.5) ESX Servers moving again VC (4.0).

  1 undo the HA and DRS configuration on the farm.

  2. unplug all battery ESX servers.

  3 remove all ESX server farm servers.

  4. Add the ESX Server to new cluster in VC (4.0).

  5. configure the HA and DRS on the new farm.

  Used for over 700 ESX servers with zero impact.

• Qosmio G20: Question about networking & monitor in and Xbox

  Just bought a G20 last week and I'm in love. First laptop I've ever owned and its worth every penny.

  A few scarecrows.

  I never received an antenna adapter to connect my in arial, but I'm sure I sohuld of fact. In the quick start manual of what it listed everything that I should received in the pack, and who was listed. Was not enough one - if anyone knows a number to contact Toshiba and get one of these sent to me? Can't seem to find one anywhere.

  Second... I'm going to my brother's computer network. Novice course of network, it does not work that well. I'm not sure whether if we need a router? I just want to connect to his computer and use the internet through that. As you would with a network cable. So he bought himself a wireless network card... but we'll be buggered if we can get it too work. Any advice or a definitive guide... or do we this router after all?

  And thirdly, sorry for the long post, but I'm playing my Xbox by the G20, but I'm having no luck what so ever. I plugged the monitor using the three composite cards (white, yellow and red) but nothing that passes through. The only way I've seen a photo is when you set up a decoder and it happens in a small box when its analyses for channels... but I can't select to see and it seems s delay 1 second.

  Sorry for the post long-term... just try to make it all sorted.

  Thanks in advance for any help.

  Hello

  You are right that the Qosmio is a very nice unit.
  But I'm not sure about the antenna adapter. I found the information in the user manual that the antenna adapter is optional. In this case the adapter will not always come with the laptop, but you can ask that the Toshiba service partner.

  Well well, on the network connection: If you want to connect two computer, you need a crossover network cable if you don t use the router. In addition, two laptop computers must be in the same workgroup. In addition, you must manually set the IP address, the default gateway and the subnet mask in the internet protocol TCP/IP properties.

  On the Xbox:
  If you want to know more on the connection of MCE and Xbox, see this Microsoft Web site.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Check also questions other messages of the forum on the Xbox:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794#33794

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9756&MessageID=34462#34462

  Good luck

• Question about VMware Converter traffic

  Hi all

  Hoping someone can shed some light on this. I do a P2V on a physical server in site A and destination ESXi host is also at the site. However, the field 'destination' in the VMware converter must be the vCenter server which is on the Site B (via a 6 MB WAN connection) as the destination host is managed by a vCenter server. My question is if I use the server vCenter (located on a WAN connection) as a destination and then choose the host located on the local site in the converter, converter traffic flow over the WAN? Or is it just flow locally from the Source to the Destination and just use the vCenter server as a server of type "authentication" for the initial Setup?

  And as a side note, if I set the destination host ESXi as a destination in the converter instead of the vCenter server, I get the error indicated in this KB. http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2012310

  With the help of converter 5.5.1

  Thanks for your help!

  Hello

  Traffic passes from the source computer to the destination ESX. You will have a small slowdown in the wizard before you start converting mainly to get the VC inventory. See the graphics in the user pp. 11-13 guide

  Concerning

  P.S. If you want to V2V, keep the server converter on site A, too as in this case, that the data passes through it.

• Question about the memory consumed and active

  I have esx4.1 on three dl585 running. I have about 100 active vm running, and I have a small question.

  My vm is all 2008 r2 datacenter and I gave them 1 cpu and 4 GB of ram. When I recover a single virtual machine and look at the summary page, I see the bones of memory consumed host 4075 mb and the active guest memory 81 MB operating system. My question is can I reduce the host cunsumed memory to 2 GB without noticing a difference within the virtual machine?

  It looks like you can.   To be absolutely sure that you'd need monitor assets long enough to have a good idea of what the average is and what are the tops.

• Designjet Z2600: Questions about head of ink and printer maintenance

  We have recently acquired a printer, Designjet Z2600 24 "large format.  A few questions so we can know what to expect:

  • Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently.  We plan on it using every two weeks, but there may be times when a month or two will pass between uses.  Is this a problem?
  • Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
  • Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?

  Thank you!

  Hello

  The recommendation is to keep it at any time.

  If you use the printer turns off completely the power button.

  When not in use, it will go in standby mode, wake up maintenance and sleep.

• Question about batteries for laptops and a station (HP Elitebook 840)

  Hello

  I have a question for plagging the laptop to the docking station and battery, basically my main concern is not to connect to the laptop to run a/c, while it is fully charged and I'm always load only up to 100% and then when it reaches the minmum load then I connect it comes back to a/c, so my question here

  So do you think that that plug the laptop into the docking station will not decrease the duration of battery life because it will always be in charge mode?

  Thank you.

  After this announcement, I made a simple google image search with different keywords before 'docking and battery' and I found the following thread that answers my question

  Docking station ruin the battery?

  http://h30434.www3.HP.com/T5/notebook-hardware/is-docking-station-ruining-the-battery/TD-p/3249345

  Thank you rcspencer

  Thank you.

• Portege R700-1hd: Questions about HARD drive replacement and passwords

  I have a 1hd R700 with 320 GB HARD drive in stock. I want to upgrade it to 500 GB. This update should be pretty simple, cloning from the old to the new.

  However, I was wondering about the HARD drive password / finger.
  My HARD drive it configured to use a fingerprint/password on boot - I guess that it is involved in the BIOS and the drive itself, but I'm not exactly sure how.
  I think the HARD drive itself is locked, it is not a Windows or BIOS password.

  If I change the HARD drive will still be able to use startup disk HARD password/fingerprint? Are there requirements for material of HARD drive I need to consider before buying new HARD drive? As should be a specific type of HARD drive to work with password disk HARD/fingerprint digital?

  Thank you

  Hi bullerd,

  The HARD drive password is stored on the HARD drive so when you replace the HARD drive you must set a new password of HDD in BIOS. The password is not stored in the BIOS. In addition fingerprints can also be stored on the HARD drive or let s say fingerprint digital software but all of the operating system must be installed after Exchange HARD drive so it s new problem.

  So the two passwords you mentioned are stored on the HARD drive so it s no problem to swap the HARD drive. :)

• Satellite 230cx: Question about HARD drive, memory and CD recovery.

  Can someone tell me if I can get a recovery for a 230cx disk? And what is the max hard drive that I have and RAM.

  Thank you...

  Hello

  Well, it is a very old unit. I think that it s about 8 or 9 years.
  However, I found the information that this unit has an internal memory of 16 MB and it of possible to upgrade the memory for max 144 MB (16 + 128MB)
  Also, this unit has been delivered with a 1.37 GB HDD part Nr.: P000229560
  I don t think you will be able to use a big HDD like 10 GB. The BIOS couldn't t recognize the HARD drive. Sorry but there is no information on the maximum size of HARD drive.

  The recovery CD, you must order the Toshiba service partner.

• Question about fast display drivers and fixes

  Hello. I own a Toshiba Satellite A50-111 and I have two questions:

  1. the current version of the display on the site Web of Toshiba driver is 6.14.10.3722. However, on Intel version site Web 6.14.10.4277 is available (for Intel® 82852/82855 Graphics Controller). It is recommended to install the latest version of the manufacturer or of the most recent Toshiba Web site. I ask this because I believe some problems I'm coming with my laptop since the display driver (I currently installed the Toshiba one)

  2. in the drivers section, there are a number of quick fixes from Microsoft. My system is up to date in terms of patches from Microsoft. Should I install all these miracles?

  Thank you.

  Hello

  It is recommended to use the Toshiba driver because the drivers you can download from the Toshiba site are tested. You can install the driver provided by the producer of the graphics card, but there is no guarantee that it will work properly. You can try it. You may be lucky and it will work without any problem.

  If your system is up to date there is no need to install all the miraculous solution to all.